(2.54 mm) .100"
HCMD–10–S–03.00–01
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
Mates with:
TSW, MTSW, TST, EW,
BST, ZST, MTLW, TSM,
EJH-02 (HCSD only)
Note:
IDC assemblies are
non-standard, non-returnable.
ROW
OPTION
TYPE
STRIP
(3.30)
.130
(0.51)
.020
(2.54)
.100
(0.64)
.025
SQ
TYP
(5.08)
.200
(2.54)
.100
A
Double
(HCMD)
Single
(HCMS)
No. of Positions x .100 (2.54)
+ .180 (4.57)
(7.87)
.310
REF
(3.30)
.130
(2.54)
.100
(5.08)
.200
(2.54)
.100
Double
(HCSD)
Single
(HCSS)
(0.76)
.030
SQ.
TYP.
No. of Positions x .100 (2.54)
+ .180 (4.57)
(9.53)
.375
REF
S
= Single
D
= Double
(Color coded cable N/A
for 36 pins/row.
See –G option.)
HCM
= Male Strip
IDC SOCKET & TERMINAL CABLE
Male Plug on one end with socket on other.
Begin part number with HCM.
Socket or Male Plug on each end
Socket or Male Plug on one end
END
ASSEMBLY
NO. PINS
PER ROW
–S = Single End
ASSEMBLED
LENGTH
Assembled Length in
INCHES (±1/8")
2 inches minimum
–“XX.XX”
= Assembled Length
–D= Double End
–T = Transfer End
LEAD
STYLE A
01 (3.05) .120
02 (5.84) .230
For complete specifications and
recommended PCB layouts
see www.samtec.com?HCSD
or www.samtec.com?HCSS
HCSD, HCSS
Insulator Material:
Black Liquid Crystal Polymer
Flammability Rating:
UL 94V-O
Insulation Resistance:
5000 M
Temperature Range:
-20 °C to +105 °C
(Rainbow Cable)
-40 °C to +105 °C (Gray Cable)
Voltage RAting:
425 VAC/600 VDC
Contact:
Phosphor Bronze
Plating:
10 µ" (0.25 µm) Au on
contact area, 150 µ" (3.81 µm)
Sn on balance over
50 µ" (1.27 µm) Ni.
Lead Size Range:
.024" (0.61 mm) SQ to
.026" (0.66 mm) SQ
Lead Insertion Depth:
.185" (4.70 mm) to
.250" (6.35 mm)
Wire:
28 AWG 7/36 stranded
Tinned Copper
RoHS Compliant:
Ye s
For complete specifications and
recommended PCB layouts
see www.samtec.com?HCMD
or www.samtec.com?HCMS
HCMD, HCMS
Insulator Material:
Black Liquid Crystal Polymer
Flammability Rating:
UL 94V-O
Insulation Resistance:
5000 M
Temperature Range:
-20 °C to +105 °C
(Rainbow Cable)
-40 °C to +105 °C (Gray Cable)
Voltage RAting:
425 VAC/600 VDC
Terminal:
Phosphor Bronze
Plating:
Sn over 50 µ" (1.27 µm) Ni
Wire:
28 AWG 7/36 stranded
Tinned Copper
RoHS Compliant:
Ye s
SPECIFICATIONS
SPECIFICATIONS
HCS
= Socket Strip
05, –08,
–10, –12,
–13, –15,
–17, –20
F-219 (Rev 11NOV19)
HCMD, HCMS, HCSD, HCSS SERIES
HCSD–10–S–03.00–01–T–G
HCSS–15–S–03.00–01–G
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
IDC SOCKET & TERMINAL CABLE
6
Same as –S “XX” except outer strip
connected to conductor #2 and inside
strip connected to conductor #1.
4
#1 wire opposite position #1
5
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
“XX”
(127.00)
5.00 max.
(50.80)
2.00 min.
6
When mating double row connector
with two single row connectors, the
outer most single will be connected
to Conductor #1 and the inside single
to Conductor #2.
(50.80)
2.00
min.
(101.60)
4.00 minimum
Outer Most
(End of
Assembly)
“XX” ± 1/8" (3.18)
Single Row
Connectors
Double Row
Strips
(50.80)
2.00
min.
(101.60)
4.00 minimum
Outer Most
(End of
Assembly)
“XX” ± 1/8" (3.18)
6
OTHER
OPTIONS
NOTCH
POLARIZATION
2
Standard cable is color coded. Specify
–G for Gray cable with one red edge.
1
Specify “XX” as position. For Double
the same position will be polarized
on both ends. (Not available on
HCM, unless Transfer, then only the
socket is polarized)
01
03
02
04
01
03
Single Double
02
04
Specify Suffix from table. All
dimensions are ± 1/16" (1.59 mm). Not
available in 28 positions and higher.
3
Specify “XX” as number of
conductors to be broken out.
Requires –SXX, –WXX or –DXX
7
Requires –SXX, –WXX or –DXX
7
7
Required for HCSS and HCSD.
(Not available on HCMS or HCMD,
unless Transfer, then only the
socket is polarized.)
PLATING
OPTION
02
(3.81) .150
(1.27)
.050
01
–N= Notch Polarization
–R
= Reversed
–W “XX”
= Wiring Reversed
Daisy Chain, Single
RW
= Reversed Wiring
S “XX”
= Daisy Chain Single
D “XX”
= Daisy Chain, Double
P “XX”
= Position Polarization
–S
= 10 µ" (0.25 µm) Gold on contact area or tail,
Tin on balance
(Standard on HCSS & HCSD. Leave blank)
–T
= Tin
(Standard on HCMS & HCMD. Leave blank)
–G
= Gray Cable
ST “X”
= Stripped & Tinned
B “XX”
= Breakout
–M
= Middle Reversed
–O
= Outside Reversed
1/8" (3.18)
1/4" (6.35)
1/2" (12.70)
3/8" (9.53)
–ST8
–ST4
–ST2
–ST3
LEAD
STYLE
–01
= HCSS/HCSD or
(3.05 mm) .120" tail for
HCMS/HCMD
–02
= (5.84 mm) .230" tail
HCMS/HCMD only