TEN15-4812 - TRACO ELECTRONIC AG

http://www.tracopower.com Page 1 of 4

Features

◆ Wide 2:1 input range

◆ High efﬁciency up to 88%

◆ Extended operating temperature range

–40°C to +85°C

◆ Indeﬁnite short circuit protection

◆ I/O isolation 1500 VDC

◆ Input ﬁlter to meet EN 55022, Class A and

FCC, level A without external components

◆ Industry standard footprint

◆ Shielded metal case with insulated

baseplate

◆ 3-year product warranty

DC/DC Converters

TEN 15 Series, 15 Watt

The TEN 15 series is a family of high performance 15W DC/DC converters in a

compact 2” x 1” low proﬁle package with industry standard footprint. A high efﬁci-

ency allows a wide operating temperature range of –40°C to +85°C. A built-in EMI

ﬁlter is built in to meet EN 55022, class A without any external components.

Further standard features include over voltage protection and short-circuit protec-

tion. Typical applications for these converters are battery operated equipment, in-

strumentation, distributed power architectures in communication and industrial elec-

tronics, everywhere where isolated, tightly regulated voltages are required.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

TEN 15-1210 3.3 VDC 4’000 mA 79 %

TEN 15-1211 5 VDC 3‘000 mA 82 %

TEN 15-1212 9 – 18 VDC 12 VDC 1’250 mA 86 %

TEN 15-1213 (12 VDC nominal) 15 VDC 1‘000 mA 86 %

TEN 15-1221 ±5 VDC ±1500 mA 83 %

TEN 15-1222 ±12 VDC ±625 mA 86 %

TEN 15-1223 ±15 VDC ±500 mA 84 %

TEN 15-2410 3.3 VDC 4’000 mA 80 %

TEN 15-2411 5 VDC 3‘000 mA 84 %

TEN 15-2412 18 – 36 VDC 12 VDC 1‘250 mA 85 %

TEN 15-2413 (24 VDC nominal) 15 VDC 1‘000 mA 85 %

TEN 15-2421 ±5 VDC ±1’500 mA 84 %

TEN 15-2422 ±12 VDC ±625 mA 86 %

TEN 15-2423 ±15 VDC ±500 mA 86 %

TEN 15-4810 3.3 VDC 4‘000 mA 81 %

TEN 15-4811 5 VDC 3‘000 mA 83 %

TEN 15-4812 36 – 75 VDC 12 VDC 1‘250 mA 87 %

TEN 15-4813 (48 VDC nomial) 15 VDC 1‘000 mA 86 %

TEN 15-4821 ±5 VDC ±1‘500 mA 85 %

TEN 15-4822 ±12 VDC ±625 mA 88 %

TEN 15-4823 ±15 VDC ±500 mA 87 %

Models

not recommended for new design in

http://www.tracopower.com Page 2 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Input Specifications

Input current at no load 12 Vin models: 30 mA typ.

24 Vin models: 20 mA typ.

48 Vin models: 15 mA typ.

Input current at full load 12 Vin; 3.3 VDC models: 1470 mA typ.

12 Vin; other models: 1550 mA typ.

24 Vin; 3.3 VDC models: 730 mA typ.

24 Vin; other models: 780 mA typ.

48 Vin; 3.3 VDC models: 360 mA typ.

48 Vin; other models: 380 mA typ.

Surge voltage 12 Vin models: 36 V max.

(100 msec. max.) 24 Vin models: 50 V max.

48 Vin models: 100 V max.

Conducted noise (input) EN 55022 level A, FCC part 15, level A

Output Specifications

Voltage set accuracy ±1 %

Regulation – Input variation Vin min. to Vin max. 0.5 % max.

– Load variation 2 % – 100 % single output models: 0.5 % max.

dual output models: 1 % max. (balanced load)

5 % max. (load cross variation 25 % / 100 %)

Minimum load 2 % of rated max. output current.

(Operation at lower load is safe but major

deviations to specifyed data may occur)

Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max.

dual output models: 75 mVpk-pk max.

Temperature coefficient ±0.02 %/K

Start up time (nominal Vin and constant resistive load) 20 ms typ.

Transient response (25 % load step change) 250 µs typ.

Short circuit protection indefinite (automatic recovery)

Over load protection 150 % of Iout max typ. foldback

Over voltage protection 3.3 / 5.0 VDC models: 3.9 / 6.2 V

12 / 15 VDC models: 15 / 18 V

Capacitive load 3.3 VDC models: 10‘200 µF max.

5 VDC / ±5 VDC models: 7‘050 µF max. / ±1‘020 µF max.

12 VDC / ±12 VDC models: 1‘035 µF max. / ±495 µF max.

15 VDC / ±15 VDC models: 750 µF max. / ±165 µF max.

DC/DC Converters

TEN 15 Series 15 Watt

http://www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

General Specifications

Temperature ranges – Operating – 40°C to +85°C

– Casing temperature +100°C max.

– Storage –55°C to +105°C

Derating 3.3 / 5.0 VDC models: 2.5 %/K above 60°C

other models: 3.3 %/K above 70°C

Thermal impedance – Natural convection 12°C/W

– Natural convection with heatsink 10°C/W

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio h

Isolation (Input/Output) – Voltage 1‘500 VDC

– Capacitance 300 pF max.

– Resistance >1‘000 M Ohm

Switching frequency single output models: 500 kHz typ. (pulse width modulation)

dual output models: 300 kHz typ. (pulse width modulation)

EMC immunity – Electrostatic discharge ESD EN 61000-4-2 8 kV / 6 kV, criteria B

– RF field susceptibility EN 61000-4-3 10 V/m, criteria A

– Electrical fast transient / burst immunity input EN 61000-4-4 ±2 kV, criteria B

– Surge immunity EN 61000-4-5 ±1 kV, criteria B

– Immunity to conducted RF disturbances EN 61000-4-6 10 Vrms, criteria A

Vibration acc. MIL-STD-810F

Thermal shock acc. MIL-STD-810F

Safety standards UL 60950-1, EN 60950-1, IEC 60950-1

Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913

Environmental compliance – Reach www.tracopower.com/products/ten15-reach.pdf

– RoHS RoHS directive 2011/65/EU

Physical Specifications

Casing material copper, nickel plated

Baseplate material non conductive FR4

Potting material epoxy (UL 94V-0 rated)

Weight 27 g ( 09.5 oz)

Soldering temperature max. +265°C / 10 sec.

DC/DC Converters

TEN 15 Series 15 Watt

Application note : www.tracopower.com/products/ten15-application.pdf

Page 4 of 4

Jenatschstrasse 1 · CH-8002 Zurich · Switzerland

Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com

DC/DC Converters

TEN 15 Series 15 Watt

Outline Dimensions

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND)

3+Vout +Vout

4No pin Common

5–Vout –Vout

Pin-Out

Rev. 08/12

Dimensions in [mm], () = Inch

Pin diameter: 1.0 ±0.05 (0.02 ±0.002)

Pin pitch tolerances: ±0.25 (±0.01)

Casing tolerances: ±0.5 (±0.02)

Speciﬁcations can be changed any time without notice.

5.08

10.16

25.4

10.2

5.6

50.8

15.2 20.32

Insulated baseplate

(2.0)

(0.8)

(0.6)

(0.2)

(0.4)

(1.0)

2.5

(0.1)

(0.4)

(0.22)

Bottom View

10.16

10.2

(0.4)

Note:

The product label on converter has to be re-

moved before mounting the heat-sink.

For volume orders converters will be supplied

with heat-sinks already mounted. Please con-

tact factory for quotation.

Separate heat-sinks are only available for

prototypes and small quantity orders.

Order code: TEN-HS1

(cont.: heat-sink, thermal pad, 2 clamps)

Material: Aluminum

Finish: Anodic treatment (black)

Weight: 17g (0.60oz) without converter

Thermal impedance after assembling: 10 K/W

56.0 (2.2) max.

14.5 (0.57)

16.8 (0.66)

max.

Converter

Heat-sink

Thermal pad

Clamp

Heat-Sink (Option)