5-1-1 Unicolor lamps 4 Bow Shaped LEDs SEL6027 Series (available as Direct Mount) Part Number SEL6227S SEL6927A SEL6427EP Emitting Color Lens Color Red Orange Green Transparent red Transparent orange Transparent green Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv P d VF Conditions Conditions Conditions Conditions Conditions (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 14 20 630 10 620 10 35 10 1.9 2.5 10 10 10 587 10 590 10 33 10 2.0 2.5 10 26 20 560 10 567 10 20 10 External Dimensions Directional Characteristics (representative example) Chip Material GaAsP GaAsP GaP (Unit: mm) 60 60 60 0.2 4.6 4.9 30 2.0 0.65max 0.1 0.45 90 100% 50 0 50 90 100% 90 100% 50 0 50 90 100% 0.1 0.4 1.0min Cathode 60 30 0.2 0.2 4.0 23.0min 0 30 Resin burr 0.3max 0 30 Resin heap 0.8max Dimensional Tolerance: 0.3 (2.54) 0.2 2.1 0.8 0.2 4.0 4.4 Product Mass: Approx. 0.13 g 238 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings Visible Light Unicolor Lamp Parameter Unit PD IF IF IFP VR Top Tstg mW mA mA/C mA V C C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 -0.45 25C or higher f=1kHz, tw100 s 70 100 3 5 -30 to +80 -30 to +85 -30 to +100 Visible Light Bicolor Lamp Parameter Unit PD IF IF IFP VR Top Tstg mW mA mA/C mA V C C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 -0.45 100 25C or higher f=1kHz, tw100 s 4 5 -30 to +85 -30 to +100 Visible Light Unicolor Surface Mount LEDs Parameter Unit IF IF IFP VR Top Tstg mA mA/C mA V C C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 -0.27 70*2 30 -0.45 100*1 25C or higher f=1kHz, tw100 s 5 3 -30 to +85 -30 to +100 -30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF IF IFP VR Top Tstg mA mA/C mA V C C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 -0.45 70 4 -30 to +85 -30 to +100 25C or higher f=1kHz, tw100 s Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF IF IFP VR Top Tstg mA mA/C mA V C C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 -0.45 50 70 5 -30 to +80 -30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25C or higher f=1kHz, tw100 s