© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 1
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL
• Rated voltage: 440 VAC/480 VAC 50/60 Hz
• Capacitance range: 470 – 4700 pF
• Lead spacing: 15.0 mm
• Capacitance tolerance: ±20%
• Climatic category: 40/115/56/B, IEC 60068–1
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operating temperature range of -40˚C to +115˚C
• 100% screening factory test at 4,000 VAC, 50 Hz, 2 seconds
• Highest possible safety regarding
active and passive ammability
• Excellent self-healing properties
ensure long life even when subjected
to frequent over voltages
• Good resistance to ionization due to
impregnated dielectric
• High dV/dt capability
• Impregnated paper provides excellent stability and reliability
properties, particularly in applications with continuous operation
Overview
The PME295 Series is constructed of multilayer metallized paper
encapsulated and impregnated in self-extinguishing material
meeting the requirements of UL 94 V–0.
Applications
Typical applications include safety capacitors for bridging of
double or reinforced insulation applications requiring voltage test
up to 4,000 VAC at 60 seconds. PME295 Series capacitors can
be left in place during this test.
AC Line EMI Suppression and RC Networks
PME295 Series Metallized Impregnated Paper,
Class Y1, 440 VAC/480 VAC
Legacy Part Number System
PME295 R B 3470 MR30
Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Capacitance
Tolerance Lead and
Packaging Code
Y1, Metallized Paper R = 440 B = 15.0 Digits 2 – 4 (3) indicate the rst
three digits of the capacitance
value.
Digit 1 indicates the total number
of digits in the capacitance value.
M = ±20% See Ordering
Options Table
New KEMET Part Number System
P295 B E 471 M440 A
Capacitor
Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance
Tolerance Rated Voltage
(VAC)
Lead and
Packaging Code
P = Paper Y1, Metallized
Paper
B = 15.0 See Dimension
Table
First two digits indicate the
two most signicant digits
of the capacitance value in
picofarads. The third digit
is the number of following
zeros.
M = ±20% 440 = 440 See Ordering
Options Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 2
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
15
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads 6 +0/-1 CR06
Bulk (Bag) – Max Length Leads 30 +5/-0 A R30
Tape & Reel (Standard Reel) H
0
= 18.5 +/-0.5 L R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 P R19T1
Native 15
formed to 7.5
Ammo Pack H
0
= 16.5 +/-0.5 LAF3 R30XA
Tape & Reel (Standard Reel) H
0
= 16.5 +/-0.5 XLTF1 R25X2
Dimensions – Millimeters
B
L
H
LL
d
p
p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
15 +/-0.4 5.5 Maximum 12.5 Maximum 18 Maximum 0.8 +/-0.05
15 +/-0.4 6.5 Maximum 12.5 Maximum 18 Maximum 0.8 +/-0.05
15 +/-0.4 7.5 Maximum 14.5 Maximum 18 Maximum 0.8 +/-0.05
15 +/-0.4 8.5 Maximum 16 Maximum 18 Maximum 0.8 +/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 3
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
Performance Characteristics
Rated Voltage
440 VAC 50/60 Hz (ENEC)
480 VAC 50/60 Hz (UL, cUL)
Capacitance Range 0.00047 – 0.0047 µF
Capacitance Tolerance ±20%
Temperature Range -40°C to +115°C
Climatic Category 40/115/56/B
Approvals ENEC, UL, cUL
Dissipation Factor
Maximum Values at +23°C
1 kHz 1.3%
Test Voltage Between Terminals
The 100% screening factory test is carried out at 4,000 VAC, 50 Hz,
2 seconds. The voltage level is selected to meet the requirements
in applicable equipment standards. All electrical characteristics are
checked after the test.
Insulation Resistance
Measured at 500 VDC after 60 seconds, +23°C
Minimum Value Between Terminals
≥ 12,000 MΩ
In DC Applications Recommended voltage ≤ 1,500 VDC
Resonance Frequency Tabulated self-resonance frequencies f0 refer to 5 mm lead length
Suppression vs. Frequency, Typical Values
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 4
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
Environmental Test Data
Test IEC Publication Procedure
Vibration IEC 60068–2–6 Test Fc
3 directions at 2 hours each
10–500 Hz at 0.75 mm or 98m/s
2
Bump IEC 60068–2–29 Test Eb 4000 bumps at 390 m/s2
Solderability IEC 60068–2–20 Test Ta Solder globule method
Passive Flammability IEC 60384–14 IEC 60384-1, IEC 60695-11-5 Needle ame test
Humidity IEC 60068–2–3 Test Ca +40°C and 90-95% RH, 56 days
Approvals
Certication Body Mark Specication File Number
Intertek Semko AB EN/IEC 60384-14 (440 VAC) SE/0140–13C
UL UL 60384-14 CAN/
CSA-E60384-14-09 E73869
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 5
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
Maximum Dimensions in mm Lead
Spacing (p)
fo
(MHz)
dV/dt
(V/µs)
New KEMET Part
Number
Legacy Part
Number
B H L
0.00047 5.5 12.5 18 15 64 2000 P295BE471M440(1) PME295RB3470M(1)
0.00056 5.5 12.5 18 15 59 2000 P295BE561M440(1) PME295RB3560M(1)
0.00068 5.5 12.5 18 15 54 2000 P295BE681M440(1) PME295RB3680M(1)
0.00082 5.5 12.5 18 15 49 2000 P295BE821M440(1) PME295RB3820M(1)
0.001 5.5 12.5 18 15 46 2000 P295BE102M440(1) PME295RB4100M(1)
0.0012 6.5 12.5 18 15 43 2000 P295BJ122M440(1) PME295RB4120M(1)
0.0015 6.5 12.5 18 15 40 2000 P295BJ152M440(1) PME295RB4150M(1)
0.0018 6.5 12.5 18 15 37 2000 P295BJ182M440(1) PME295RB4180M(1)
0.0022 6.5 12.5 18 15 33 2000 P295BJ222M440(1) PME295RB4220M(1)
0.0025 7.5 14.5 18 15 31 2000 P295BL252M440(1) PME295RB4250M(1)
0.0027 7.5 14.5 18 15 30 2000 P295BL272M440(1) PME295RB4270M(1)
0.0033 7.5 14.5 18 15 27 2000 P295BL332M440(1) PME295RB4330M(1)
0.0039 8.5 16 18 15 24 2000 P295BQ392M440(1) PME295RB4390M(1)
0.0047 8.5 16 18 15 22 2000 P295BQ472M440(1) PME295RB4470M(1)
Capacitance
Value (µF) B (mm) H (mm) L (mm) Lead
Spacing (p) fo (MHz) dV/dt
(V/µs) New KEMET
Part Number Legacy Part Number
(1) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
Soldering Process
The implementation of the RoHS Directive has required the use of SnAuCu (SAC) or SnCu alloys as primary solder. These alloys
require a higher liquidus temperature (217ºC – 221ºC) as compared
to SnPb eutectic alloy (183ºC). Due to the higher pre-heat and
wave temperatures, the heat stress to components has increased
considerably. Polypropylene capacitors are especially sensitive
to soldering temperature due to the relatively low melting point of
polypropylene material (160ºC – 170ºC). As a result, wave soldering
can be destructive, especially to mechanically small polypropylene
capacitors with lead spacings of 5 –10 mm. For more information,
please refer to KEMET's Recommended Soldering Proles or
contact a KEMET representative. IEC Publication 61760–1 Edition 2
may also be consulted for general guidelines.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 6
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
Marking
• KEMET's logo
• Series
• Capacitance
• Rated voltage
• Approval marks
• IEC climatic category
• Passive ammability class
• Manufacturing date code
Packaging Quantities
Lead
Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long
Leads
Standard
Reel
ø 360 mm
Large
Reel
ø 500 mm
Standard
Reel
Formed
Ammo
Formed
15
5.5 10.5 18 1000 800 600 1200 550 570
5.5 12.5 18 1000 800 600 1200 550 570
7.5 14.5 18 800 400 400 800 350 378
6.5 12.5 18 1000 600 500 1000 450 480
8.5 16 18 600 400 400 800 350 324
815 18 600 400 400 800 350 351
9.5 17.5 18 500 300 350 700 250 297
612 18 1000 800 500 1000 450 520
11 19 18 450 250 300 600 250 252
13 12.5 18 400 300 250 500 200 216
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 7
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm Standard IEC 60286–2
Lead spacing +6/-0.1 F
Formed
7.5
10.2 15.2 20.3 22.5 F
Carrier tape width +/-0.5 W18 18 18 18 18 18+1/-0.5
Hold-down tape width +/-0.3 W
0
912 12 12 12
Position of sprocket hole +/-0.5 W199999 9+0.75/-0.5
Distance between tapes Maximum W233333 3
Sprocket hole diameter +/-0.2 D044444 4
Feed hole lead spacing +/-0.3 P0
(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P
1
3.75 7.6 5.1 8.9 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation Maximum ∆h 22222 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX
Sprocket hole/cap body Nominal H
0
(2) 18+2/-0 18+2/-0 18+2/-0 18+2/-0 18.5+/-0.5 18+2/-0
Sprocket hole/top of cap body Maximum H1
(3) 35 35 35 35 58 58MAX
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request. (3) Depending on case size.
(4) 15 mm available on request.
Lead Spacing 10.2 – 15.2 mm
Lead Spacing 20.3 – 22.5 mm
Formed Leads from 10.2 to 7.5 mm
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 8
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H W T
R4x, R4x+R, R7x, RSB
360 340 59F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx 330 330 50
Reel Speci cations
Series Dimensions (mm)
D H W
R4x, R4x+R, R7x, RSB 355
500
30
25 55 (Max)F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year Code Month Code
2000 MJanuary 1
2001 NFebruary 2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008 WSeptember 9
2009 XOctober O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017 J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 9
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 10
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Electrolytic LifeCalculator http://www.kemet.com:8080/elc
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET speci cally disclaims – any warranty concerning suitability for a speci c customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3064_PME295_Y1_440-480 • 4/26/2013 11
Film Capacitors
AC Line EMI Suppression and RC Networks – PME295 Series Metallized Impregnated Paper, Class Y1, 440 VAC/480 VAC
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications, cn=Jeannette
Calvo, email=jeannettecalvo@kemet.com
Date: 2013.04.29 10:28:31 -04'00'