Automation systems SMART PLATFORM One software - One connection - One minute Omron`s Smart Platform is designed to make machine automation easy. It provides seamless, drag-and-drop integration of all automation components in your machine. From sensor to controller, from HMI to drive, all devices are accessible through one connection using a single software suite, CX-One. Built-in distributed intelligence in Omron devices means less time programming and troubleshooting. Everyone claims ease of use, a short movie explains how easy programming and configuration really can be: www.smartplatform.info 6 Programmable logic controllers (PLC) 1 Human machine interfaces (HMI) 3 Product overview Product overview 50 10 Selection table 52 CPM2C CPU units 13 HMI-Connection 55 CPM2C expansion units 14 PC based HMI Dyalox 57 CP1E CPU units 15 Integrated controller NSJ12/NSJ10 61 CP1L CPU units 17 NSJ8/NSJ5 63 CP1H CPU units 19 NS15/NS12/NS10/NS8 65 CP1W/CPM1A expansion units 20 NS5 66 CJ-Series CPU units 21 NS5 handheld 67 CJ-Series power supplies, expansions 23 Accessories NSJ/NS 68 CJ-Series digital I/O units 24 Integrated controller/ Scalable HMI Compact HMI NQ5/NQ3 69 CJ-Series analogue I/O and control units 25 Funktion-key HMI NT11 70 CJ-Series motion/position control units 27 NT2S 71 CJ-Series communication units 29 CS-Series CPU units 30 CS-Series power supplies, backplanes 31 CS-Series digital I/O units 32 CS-Series analogue and process I/O units 33 CS-Series position/motion control units 35 CS-Series communication units 36 WE70 37 8 Selection table Compact PLC Modular PLC Rack PLC Wireless communication Remote I/O 2 Product overview 38 Selection table Remote I/O Wireless I/O Scalable HMI 41 SmartSlice I/O system 42 Compact I/O GX-series 43 Compact I/O DRT2 44 Compact I/O CRT1 45 Compact I/O SRT2 46 Field I/O DRT2 47 Field I/O SRT2 48 WD30/WT30 49 7 Automation systems Automation systems - Table of contents Programmable logic controllers (PLC) KNOW ONE... KNOW THEM ALL! Whether your automation requires a simple and economical solution, or your target is advanced, high-speed control, you can find what you need in Omron's line-up of Programmable Controllers. And if your systems grow, or change due to market demand, you will find that only Omron offers a full range of Compact PLCs and Modular PLCs that share the same architecture. Therefore your programs are fully upward compatible, both in memory allocation and instruction set. * One scalable PLC family to always match exactly with your application * Transparent communication routing through different networks * The best size/performance ratio in the industry Compact Max. I/O size? 8 up to 180 up to 180 up to 192 up to 320 CP1E CP1L CPM2C CP1H Page 15 Page 17 Page 13 Page 19 PLC 1 Type of PLC needed? Modular Rack Max. I/O size? Max. I/O size? up to 640 up to 2560 up to 5120 Dual redundancy High-speed synchronous I/O CJ1M CJ2M CJ2H CS1G/H CS1D Page 21 Page 21 Page 21 Page 30 Page 30 9 Selection table Compact PLC series Model CPM2C Max digital I/O points*1 192 Built-in Digital I/O 10 to 32 CP1E CP1L 180 320*2 10 to 60 10 to 60 20 or 40 Interrupt inputs 2 or 4 4 or 6 2, 4, or 6 6 or 8 Counter inputs 2 or 4 5 or 6 4 2 or 4 Pulse outputs*1 2 2 2 2 or 4 USB port standard Expansion I/O units Quick-response inputs Input interrupts High-speed counter Pulse output with PWM Built-in RS-232C port Up to 1 serial option boards Real time clock 2 Analogue adjusters USB port standard Expansion I/O units Quick-response inputs Input interrupts High-speed counter Pulse output with PWM Up to 2 serial option boards Real time clock 1 Analogue adjuster 1 External analogue input USB port standard Expansion I/O units CJ-series Special I/O Units CJ-series CPU Bus Units Quick-response inputs Input interrupts High-speed counter Pulse output with PWM Built-in RS-232C port Option board slots Real time clock 1 Analogue adjuster 1 External analogue input LED display, 2 digit 1.19 s 0.55 s 0.10 s Program memory 4K words 2 or 8K steps 5 or 10K steps 20K steps Data memory 2K words 2 or 8K words 10 or 32K words 32K words - Memory cassette Memory cassette CPU features*1 Compact size Expansion units Quick-response inputs Input interrupts High-speed counter Pulse output with PWM Built-in RS-232C port Real time clock Instruction Execution time 0.64 s (bit instruction) External memory Expansion memory unit Analogue I/O Analogue I/O unit Temperature sensor unit Built-in for E-NA model (2 in + 1 out) Analogue I/O Expansion Units Analogue I/O Expansion Units Temperature Input Expansion Units Temperature Input Expansion Units Special function units - Fieldbus I/O CompoBus/S DeviceNet Page 13 10 Built-in for XA model (4 in + 2 out) Analogue I/O Expansion Units Temperature Input Expansion Units CJ Analogue I/O Units CJ Temperature Units CJ-series Special I/O Units CJ-series CPU Bus Units Fieldbus master - *1 *2 CP1H 180 Ethernet EtherNet/IP Controller Link DeviceNet PROFIBUS-DP PROFINET ModBus CompoNet CompoBus/S CAN (freely configurable) PROFIBUS-DP CompoBus/S DeviceNet PROFIBUS-DP CompoBus/S DeviceNet PROFIBUS-DP CompoBus/S DeviceNet 15 17 19 Some features listed are not available for all CPU types within each series. Please review specifications for more information on CPU features and performance. Represents local I/O capacity. If a fieldbus master is used more I/O is possible. Programmable logic controllers Rack PLC series PLC Modular PLC series CJ1M/G Built-in*1 Digital I/O 16 CJ2M 2560 USB port standard Built-in Ethernet/IP port High-speed I/O units Option board plug-in Structures and arrays Tag data links Compact size No backplane required Large program capacity Function Block memory Easy backups Real time clock USB port standard Built-in Ethernet/IP port High-speed I/O units Structures and arrays Tag data links Synchronous I/O Compact size No backplane required Extra Large program capacity Easy backups Real time clock High I/O capacity Inner board support Large program capacity Backwards compatible Easy backups Real time clock Redundant CPU Redundant power supply Hot swapping High I/O capacity Inner board support Large program capacity Backwards compatible Easy backups Real time clock 0.04 s 0.016 s 0.04/0.02 s 0.04/0.02 s 5 to 60K steps 50 to 400K steps 10 to 250K steps 10 to 250K steps 64 to 160K words 160 to 832K words 64 to 448K words 64 to 448K words Temperature control High-speed counters (500 kHz) SSI encoder input Position control Protocol macro RFID sensor unit High-speed I/O Synchronised Position Data collection & storage unit Temperature control SSI encoder input High-speed counters (500 kHz) Position control Motion control Process control Protocol macro RFID sensor unit Data collection & storage unit - - - Pulse outputs 2 - Program memory 5 to 60K steps Data memory 32 to 128K words CS1D 5120 Counter inputs 2 Instruction Execution time 0.10/0.04 s (bit instruction) CS1G/H 5120 Interrupt inputs 4 CPU features*1 Compact size No backplane required Large program capacity Easy backups Built-in pulse I/O Loop control CPU type Real time clock CJ2H 2560 1 Model Max. digital I/O points*1 1280 CompactFlash memory Up to 512 MB Analogue I/O Analogue I/O unit Temperature sensor unit Temperature control unit Special function units Temperature control High-speed counters (500 kHz) SSI encoder input Position control Protocol macro RFID sensor unit Weighing unit Data collection & storage unit Fieldbus master Ethernet EtherNet/IP Controller Link DeviceNet PROFIBUS-DP PROFINET ModBus CompoNet CompoBus/S CAN (freely configurable) Fieldbus I/O DeviceNet PROFIBUS-DP CAN (freely configurable) Page 21 *1 30 Some features listed are not available for all CPU types within each series. Please review specifications for more information on CPU features and performance. 11 12 CPM2C CPU units Compact PLC The versatile slim-line controller Space-saving slim outline, high-density I/O 10-32 I/O points per CPU, transistor or relay outputs 20 kHz counter input, two 10 kHz pulse outputs integrated Two communication ports built-in, freely accessible Digital, analogue, and fieldbus expansion units 1 * * * * * PLC An extensive range of models ensures efficient machine control in an ultra-compact package. CPU units are available with relay or transistor output, terminal block or various connector options, and an optional real-time clock function. Select the output type, number of I/O points and other specifications to meet your needs. Expansion I/O units with 8 to 32 I/O points make it possible to configure a control system with a maximum of 192 I/O points. Ordering information Input points 6 points Output points Program capacity Data memory capacity Logic execution speed Size in mm (HxWxD) I/O Connectors 4 points 4K words 2K words 0.64 s 90x33x65 2 Terminal blocks Relay 2 Fujitsu (24 pt) 2 MIL (20 pt) 12 points 8 points 4K words 2K words 0.64 s 90x33x65 2K words 0.64 s 90x33x65 Real time clock Order code 1 Encoder input (20 kHz) - CPM2C-10CDR-D Yes CPM2C-10C1DR-D 1 Encoder input (20 kHz) 2 Pulse output (10 kHz) - CPM2C-10CDT1C-D Yes CPM2C-10C1DT1C-D Transistor (source type) 1 Encoder input (20 kHz) 2 Pulse output (10 kHz) - CPM2C-10CDT1M-D Yes CPM2C-10C1DT1M-D 1 Encoder input (20 kHz) - CPM2C-20CDR-D Yes CPM2C-20C1DR-D Transistor (source type) 1 Encoder input (20 kHz) 2 Pulse output (10 kHz) - CPM2C-20CDT1C-D Yes CPM2C-20C1DT1C-D Transistor (source type) 1 Encoder input (20 kHz) 2 Pulse output (10 kHz) - CPM2C-20CDT1M-D Yes CPM2C-20C1DT1M-D 2 Fujitsu (24 pt) Transistor (source type) 1 Encoder input (20 kHz) 2 Pulse output (10 kHz) - CPM2C-32CDT1C-D 2 MIL (20 pt) Transistor (source type) 1 Encoder input (20 kHz) 2 Pulse output (10 kHz) - CPM2C-32CDT1M-D 2 MIL (20 pt) 16 points 4K words Built-in functions Transistor (source type) 2 Terminal blocks Relay 2 Fujitsu (24 pt) 16 points Output method 6 points 4 points 4K words 2K words 0.64 s 90x40x65 1 Fujitsu (24 pt) Transistor (source type) 1 Encoder input (20 kHz) 2 Pulse output (10 kHz) Programmable Slave with DeviceNet slave and CompoBus/S Master Yes CPM2C-S110C-DRT 6 points 4 points 4K words 2K words 0.64 s 90x40x65 1 Fujitsu (24 pt) Transistor (source type) 1 Encoder input (20 kHz) 2 Pulse output (10 kHz) CompoBus/S Master Yes CPM2C-S110C Note: All CPU's are available only with DC supply voltage (CPM2C-PA201 can be used as power supply). CPU's with sourcing transistor outputs are also available with sinking transistor outputs. MIL = connector according to MIL-C-83503 (compatible with DIN 41651/IEC 60603-1). 13 CPM2C expansion units Compact PLC Expand the capacity of your CPM2C PLC Expansion I/O units with 8 to 32 I/O points make it possible to configure a control system with a maximum of 192 I/O points Ordering information Unit Output type I/O Connectors Inputs Outputs Order code Expansion I/O units - 1 Fujitsu (24 pt) 8 - CPM2C-8EDC 16 - - 8 1 MIL (20 pt) - 1 Fujitsu (24 pt) CPM2C-8EDM 1 MIL (20 pt) Relay 1 Terminal block Transistor output (source type) 1 Fujitsu (24 pt) CPM2C-16EDM 1 Fujitsu (24 pt) CPM2C-8ER CPM2C-8ET1C 1 MIL (20 pt) Transistor output (source type) CPM2C-16EDC CPM2C-8ET1M - 16 1 MIL (20 pt) CPM2C-16ET1C CPM2C-16ET1M Relay 2 Terminal blocks 6 4 CPM2C-10EDR Relay 2 Terminal blocks 12 8 CPM2C-20EDR Transistor output (source type) 2 Fujitsu (24 pt) 16 8 CPM2C-24EDT1C 16 16 2 MIL (20 pt) Transistor output (source type) 2 Fujitsu (24 pt) CPM2C-24EDT1M 2 MIL (20 pt) CPM2C-32EDT1C CPM2C-32EDT1M Analogue I/O units Analogue (resolution 1/6000) 2 Terminal blocks 2 1 CPM2C-MAD11 Temperature sensor units Thermocouple input 1 Terminal block 2 - CPM2C-TS001 Platinum resistance input 1 Terminal block 2 - CPM2C-TS101 CompoBus/S I/O link unit - 1 Terminal block I/O link of 8 input bits and 8 output bits CPM2C-SRT21 RS-232C and RS422 adapter units - 1 D-sub 9-pin RS-232C CPM2C-CIF01-V1 1 Terminal block and 1 D-sub 9-pin RS-232C and RS422 CPM2C-CIF11 Note: Expansion I/O units with sourcing transistor outputs are also available with sinking transistor outputs. MIL = connector according to MIL-C-83503 (compatible with DIN 41651/IEC 60603-1). 14 CP1E CPU units Compact PLC 1 Omron's CP1E series targets a `lean' automation solution, but still offers all functionality you need to control relatively simple applications, including outstanding positioning capability. The CP1E comes with 10, 14, 20, 30, 40 or 60 I/O built-in and can be expanded with a wide range of CP1W or CPM1A expansion units up to 180 I/O points. It uses a standard USB port for programming and monitoring. The CP1E-E-type or -N type includes a serial communication port and offers an additional plug-in serial communication port. As the CP1E series shares the same architecture as the CP1L, CP1H, CJ1, and CS1 series, programs are compatible for memory allocations and instructions. PLC Easy, efficient & economic Ordering information CP1E CPU type Power supply Input points Output points Built-in functions Output method Expandability Max I/O points Program (Built-in + capacity Expanded) Data memory capacity Logic execution speed Order code E-type with 10 I/O Points 100 to 240 VAC 6 points 4 points 4 Encoder inputs (10 kHz) Relay 10 points 2K words 1.19 s CP1E-E10DR-A 24 VDC E-type with 14 I/O Points 100 to 240 VAC 8 points 6 points E-type with 20 I/O Points 12 points 8 points E-type with 30 I/O Points 18 points 12 points E-type with 40 I/O Points 24 points 16 points *1 6 Encoder inputs (10 kHz) - 2K steps Transistor (sink type) CP1E-E10DT-A Transistor (source type) CP1E-E10DT1-A Relay CP1E-E10DR-D Transistor (sink type) CP1E-E10DT-D Transistor (source type) CP1E-E10DT1-D Relay Up to 3 expansions*1 14 points CP1E-E14DR-A 20 points CP1E-E20DR-A 150 points CP1E-E30DR-A 160 points CP1E-E40DR-A It has no restriction on the possible combination of expansion units. All expansion units can be combined with each other up to the maximum nb of expansions. Note: CP1E CPU series can be expanded with CP1W-, or CPM1A expansion units There are no accessories included with E-type CP1E CPU Units. A Battery (CP1W-BAT01) cannot be used. CP1E CPU type Power supply N-type with 100 to 240 VAC 14 I/O Points (Built-in RS-232C port) Input points Output points Built-in functions Output method Expandability Max I/O points Program (Built-in + capacity Expanded) Data memory capacity Logic execution speed Order code 8 points 6 points 6 Encoder inputs (100 kHz) Relay 14 points 8K words 1.19 s CP1E-N14DR-A 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) Transistor (source type) CP1E-N14DT1-A Transistor (sink type) CP1E-N14DT-A 6 Encoder inputs (100 kHz) Relay CP1E-N14DR-D 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) Transistor (sink type) CP1E-N14DT-D Transistor (source type) CP1E-N14DT1-D 6 Encoder inputs (100 kHz) Relay 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) Transistor (sink type) CP1E-N20DT-A Transistor (source type) CP1E-N20DT1-A 6 Encoder inputs (100 kHz) Relay CP1E-N20DR-D 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) Transistor (sink type) CP1E-N20DT-D Transistor (source type) CP1E-N20DT1-D 24 VDC N-type with 100 to 240 VAC 20 I/O Points (Built-in RS-232C port) 24 VDC 12 points 8 points - 20 points 8K steps CP1E-N20DR-A 15 CP1E CPU units CP1E CPU type Power supply N-type with 100 to 240 VAC 30 I/O Points (Built-in RS-232C port) Input points Compact PLC Output points 18 points 12 points 6 Encoder inputs (100 kHz) 24 VDC N-type with 100 to 240 VAC 40 I/O Points (Built-in RS-232C port) NA-type with 100 to 240 VAC 20 I/O Points (Built-in analog and RS-232C port) 24 VDC Max I/O points Program (Built-in + capacity Expanded) Data memory capacity Logic execution speed Order code Relay 150 points 8K words 1.19 s CP1E-N30DR-A Up to 3 expansions*1 8K steps Transistor (sink type) CP1E-N30DT-A Transistor (source type) CP1E-N30DT1-A 6 Encoder inputs (100 kHz) Relay CP1E-N30DR-D 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) Transistor (sink type) CP1E-N30DT-D Transistor (source type) CP1E-N30DT1D Relay 160 points CP1E-N40DR-A 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) Transistor (sink type) CP1E-N40DT-A Transistor (source type) CP1E-N40DT1-A 6 Encoder inputs (100 kHz) Relay CP1E-N40DR-D 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) Transistor (sink type) CP1E-N40DT-D Transistor (source type) CP1E-N40DT1-D 36 points 24 points 6 Encoder inputs (100 kHz) 24 VDC Output method Expandability 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) 24 points 16 points 6 Encoder inputs (100 kHz) 24 VDC N-type with 100 to 240 VAC 60 I/O Points (Built-in RS-232C port) Built-in functions Relay 180 points CP1E-N60DR-A 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) Transistor (sink type) CP1E-N60DT-A Transistor (source type) CP1E-N60DT1-A 6 Encoder inputs (100 kHz) Relay CP1E-N60DR-D 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) Transistor (sink type) CP1E-N60DT-D Transistor (source type) CP1E-N60DT1-D 12 points (Digital) 2 points (Built-in analog) 8 points (Digital) 1 point (Built-in analog) 6 Encoder inputs (100 kHz) 2 Analogue in (res: 1/6000) 1 Analogue out (res: 1/6000) Relay + analogue 140 points CP1E-NA20DR-A 12 points (Digital) 2 points (Built-in analog) 8 points (Digital) 1 point (Built-in analog) 6 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) 2 Analogue in res: 1/6000) 1 Analogue out (res: 1/6000) Transistor (sink type) + analogue CP1E-NA20DT-D Transistor (source type) + analogue CP1E-NA20DT1-D *1 It has no restriction on the possible combination of expansion units. All expansion units can be combined with each other up to the maximum nb of expansions. Note: CP1E CPU series can be expanded with CP1W-, or CPM1A expansion units. There are no accessories included with N/NA-type CP1E CPU Units. RS-232C connectors for the built-in RS-232C port and the Battery (CP1W-BAT01) are not included. Accessories Type Remarks Order code RS-232C Option Board Plug-in board (D-Sub, 9 pins, female) CP1W-CIF01 RS-422A/485 Option board Plug-in board CP1W-CIF11 RS-422A/485 Option board (isolated type) Plug-in board CP1W-CIF12 USB Programming cable A-type male to B-type male (length: 1.8 m) CP1W-CN221 Ethernet option board Plug-in board (not for 10 points CPU) CP1W-CIF41*1 *1 16 Only firmware v2.0 CP1L CPU units Compact PLC 1 When it comes to controllers for compact machines, Omron's CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. It provides all the functionality you need to control your machine, including outstanding positioning capability. The CP1L comes with 14, 20, 30, 40, or 60 I/O built-in and can be expanded with a wide range of CP1W or CPM1A expansion units up to 180 I/O points. It uses a standard USB port for programming and monitoring and offers two optional plug-in serial communication ports, of which one can be used for a display or Ethernet option as well. As the CP1L series shares the same architecture as the CP1E, CP1H, CJ1, and CS1 series, programs are compatible for memory allocations and instructions. PLC The compact machine controller Ordering information CP1L CPU type Power supply Input points L-Type with 10 I/O Points 20.4 to 26.4 VDC 6 points Output points Built-in functions 4 points 4 Encoder inputs Relay (100 kHz) 2 Interrupts/counters 4 Encoder inputs (100 kHz) 2 Pulse outputs (100 kHz) 2 Interrupts/counters 84 to 264 VAC L-Type with 14 I/O Points L-Type with 20 I/O Points Max I/O points Program (Built-in + Capacity Expanded) Data Memory capacity - 10 points 10K words 0.55 s 5K steps 6 points 4 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) 4 Interrupts/counters Logic execution speed Order code CP1L-L10DR-D Transistor (sink type) CP1L-L10DT-D Transistor (source type) CP1L-L10DT1-D Transistor (sink type) CP1L-L10DR-A Up to 1 expansion*1 54 points CP1L-L14DT-D Transistor (source type) CP1L-L14DT1-D 4 Encoder inputs Relay (100 kHz) 4 Interrupts/counters CP1L-L14DR-D 85 to 264 VAC 4 Encoder inputs Relay (100 kHz) 4 Interrupts/counters CP1L-L14DR-A 20.4 to 26.4 VDC 12 points 8 points 4 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) 6 Interrupts/counters 60 points CP1L-L20DT-D Transistor (source type) CP1L-L20DT1-D CP1L-L20DR-D 4 Encoder inputs Relay (100 kHz) 6 Interrupts/counters CP1L-L20DR-A Transistor (sink type) Up to 3 expansions*1 150 points Transistor (source type) 10K steps 32K words CP1L-M30DT-D CP1L-M30DT1-D 4 Encoder inputs Relay (100 kHz) 6 Interrupts/counters CP1L-M30DR-D 4 Encoder inputs Relay (100 kHz) 6 Interrupts/counters CP1L-M30DR-A 20.4 to 26.4 VDC 24 points 16 points 4 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) 6 Interrupts/counters 85 to 264 VAC Transistor (sink type) 4 Encoder inputs Relay (100 kHz) 6 Interrupts/counters 20.4 to 26.4 VDC 18 points 12 points 4 Encoder inputs (100 kHz) 2 Pulse outputs (100kHz) 6 Interrupts/counters 85 to 264 VAC M-Type with 40 I/O Points Expandability 4 Encoder inputs Relay (100 kHz) 2 Interrupts/counters 20.4 to 26.4 VDC 8 points 85 to 264 VAC M-Type with 30 I/O Points Output type Transistor (sink type) Transistor (source type) 160 points CP1L-M40DT-D CP1L-M40DT1-D 4 Encoder inputs Relay (100 kHz) 6 Interrupts/counters CP1L-M40DR-D 24 points 16 points 4 Encoder inputs Relay (100 kHz) 6 Interrupts/counters CP1L-M40DR-A 17 CP1L CPU units CP1L CPU type Power supply M-Type with 60 I/O Points 20.4 to 26.4 VDC 36 points 24 points 4 Encoder inputs (100 kHz) 2 Pulse outputs (100 kHz) 6 Interrupts/Counters 85 to 264 VAC *1 Input points Compact PLC Output points Built-in functions Output type Expandability Max I/O points Program (Built-in + Capacity Expanded) Data Memory capacity Transistor (sink type) Up to 3 expansions*1 180 points 32K words 0.55 s 10K steps Transistor (source type) Logic execution speed Order code CP1L-M60DT-D CP1L-M60DT1-D 4 Encoder inputs Relay (100 kHz) 6 Interrupts/counters CP1L-M60DR-D 4 Encoder inputs Relay (100 kHz) 6 Interrupts/counters CP1L-M60DR-A It has no restriction on the possible combination of expansion units. All expansion units can be combined with each other up to the maximum nb of expansions. Note: CP1L CPU series can be expanded with CP1W-, or CPM1A expansion units Accessories Type Remarks Order code RS-232C Option Board Plug-in board (D-Sub, 9 pins, female) CP1W-CIF01 RS-422A/485 Option board Plug-in board (Terminal block) CP1W-CIF11 RS422A/485 (isolated) option board Plug-in board (D-Sub, 9 pins, female) CP1W-CIF12 Ethernet option board Plug-in board (not for 10 points CPU) CP1W-CIF41 Memory cassette 512K words (upload/download program) CP1W-ME05M USB Programming cable A-type male to B-type male (length: 1.8m) CP1W-CN221 LCD display 4 rows x 12 characters CP1W-DAM01 18 CP1H CPU units Compact PLC Designed for compact machines, it combines the compactness of a micro PLC and the power of a modular PLC. Four built-in high-speed counters and four pulse outputs are ideal for multi-axis positioning control. The CP1H-XA comes with 4 analogue inputs and 2 analogue outputs built-in. This makes it suitable for simple loop control, using the PLC's advanced PID control function with auto-tuning. The CP1H can be expanded with CPM1 I/Os and supports up to 2 CJ1 special I/O units. This means that it is open to popular fieldbuses and supports all communication units of the CJ1 series. Up to 1 MHz for inputs/outputs CJ1M compatible instruction set and execution speed 4 analogue inputs and 2 analogue outputs for the XA model USB port for easy communication, programming and configuration Supports PROFIBUS, DeviceNet, CAN and Ethernet 1 * * * * * Ordering information CP1H CPU type Power supply Input points Output points Y-Type with 20 I/O Points 20.4 to 26.4 VDC 12 points 8 points X-Type with 40 I/O Points 20.4 to 26.4 VDC 24 points 16 points 4 Encoder inputs (100 kHz) 4 Pulse outputs (100 kHz) 8 Interrupts/counters 85 to 264 VAC XA-Type with 40 I/O Points (Built-in analog) 20.4 to 26.4 VDC 24 points (Digital) 4 points (Built-in analog) 85 to 264 VAC *1 16 points (Digital) 2 points (Built-in analog) Built-in functions Output method Expandability 4 Encoder inputs Transistor (2x1 MHz + (sink type) 2x100 kHz) 4 Pulse outputs (2x1 MHz + 2x100 kHz) 6 Interrupts/counters Transistor (source type) Transistor (sink type) Up to 7 expansions*1 Max I/O points Program (Built-in + capacity Expanded) Data memory capacity 300 points 32K words 0.1s 320 points 20K steps Logic execution speed Order code CP1H-Y20DT-D CP1H-X40DT1-D CP1H-X40DT-D 4 Encoder inputs Relay (100 kHz) 8 Interrupts/Counters CP1H-X40DR-A 4 Encoder inputs (100 kHz) 4 Pulse outputs (100 kHz) 8 Interrupts/counters 4 Analogue in (res: 1/12000) 2 Analogue out (res: 1/12000) Transistor (source type) + analogue CP1H-XA40DT1-D Transistor (sink type) + analogue CP1H-XA40DT-D 4 Encoder inputs Relay + analogue (100 kHz) 8 Interrupts/counters 4 Analogue in (res: 1/12000) 2 Analogue out (res: 1/12000) CP1H-XA40DR-A It has some restrictions on the possible combination of CP1W-, or CPM1A expansion units. Note: CP1H CPU series can be expanded with CP1W-, or CPM1A expansion units (Up to 7 units) and CJ1 Special I/O units (Up to 2 units). Some expansion units count for 2 unit numbers (eg. CP1W/CPM1A-AD041, CP1W/CPM1A-DA041, CP1W/CPM1A-TS002 and CP1W/CPM1A-TS102) but only 7 expansion unit numbers can be allocated in a CP1H PLC's configuration. Accessories Type Remarks Order code RS-232C option board Plug-in board (D-Sub, 9 pins, female) CP1W-CIF01 RS-422A/485 option board Plug-in board (Terminal block) CP1W-CIF11 RS422A/485 (isolated) option board Plug-in board (D-Sub, 9 pins, female) CP1W-CIF12 Ethernet option board Plug-in board (not for 10 points CPU) CP1W-CIF41 Memory cassette 512K words (upload/download program) CP1W-ME05M Expansion I/O connecting cable 80 cm cable to connect CPM1A I/O CP1W-CN811 CJ1 expansion unit adapter Unit to connect CJ1 Special I/O units CP1W-EXT01 LCD display 4 rows x 12 characters CP1W-DAM01 PLC The All-in-One PLC 19 CP1W/CPM1A expansion units Compact PLC Expand the capacity of your compact PLC A wide variety of expansion units such as Digital I/O, Analogue I/O and Remote I/O are available to create the application you need. These CP1W / CPM1A expansion units can be used for CPM1A-, CPM2A-, CP1L-, and CP1H series PLC. Ordering information Expansion unit type Max I/O Points Inputs Outputs Built-in function Output method Size in mm (H x W x D) No. of unit Order code CP1W model numbers allocated *1 (CP1H only) Order code CPM1A model Digital I/O units 8 Points 8 Points - 8 inputs - 90 x 66 x 50 1 CP1W-8ED CPM1A-8ED - 8 Points 8 outputs Relay 90 x 66 x 50 1 CP1W-8ER CPM1A-8ER Transistor (sinking) 90 x 66 x 50 1 CP1W-8ET CPM1A-8ET Transistor (sourcing) 90 x 66 x 50 1 CP1W-8ET1 CPM1A-8ET1 16 Points 20 Points 40 Points Analogue I/O units Temperature sensor units (K, J) 12 Points 24 Points 16 Points 16 outputs Relay 90 x 86 x 50 1 CP1W-16ER - 8 Points 12 inputs 8 outputs Relay 90 x 86 x 50 1 CP1W-20EDR1 CPM1A-20EDR1 Transistor (sinking) 90 x 86 x 50 1 CP1W-20EDT CPM1A-20EDT Transistor (sourcing) 90 x 86 x 50 1 CP1W-20EDT1 CPM1A-20EDT1 90 x 150 x 50 1 CP1W-40EDR CPM1A-40EDR Transistor (sinking) 90 x 150 x 50 1 CP1W-40EDT CPM1A-40EDT Transistor (sourcing) 90 x 150 x 50 1 CP1W-40EDT1 CPM1A-40EDT1 16 Points 24 inputs 16 outputs Relay 4 Analog Points 4 Analog Points - 4 analog inputs (resolution 1/6000) Analogue 90 x 86 x 50 2 CP1W-AD041 CPM1A-AD041 4 Analog Points - 4 Analog Points 4 analog outputs (resolution 1/6000) Analogue 90 x 86 x 50 2 CP1W-DA041 CPM1A-DA041 2 Analog Points - 2 Analog Points 2 analog outputs (resolution 1/6000) Analogue 90 x 86 x 50 1 CP1W-DA021 - 3 Analog Points 2 Analog Points 1 Analog Points 2 analog inputs (resolution 1/256) 1 analog output (resolution 1/256) Analogue 90 x 66 x 50 1 - CPM1A-MAD01 2 analog inputs (resolution 1/6000) 1 analog output (resolution 1/6000) Analogue 90 x 86 x 50 1 CP1W-MAD11 CPM1A-MAD11 2 Analog Points 2 Analog Points - 2 Thermocouple inputs (K or J) - 90 x 86 x 50 1 CP1W-TS001 CPM1A-TS001 4 Analog Points 4 Analog Points - 4 Thermocouple inputs (K or J) - 90 x 86 x 50 2 CP1W-TS002 CPM1A-TS002 2 Analog Points 2 Analog Points - 2 Platinum resistance thermometer inputs (Pt100 or JPt100) - 90 x 86 x 50 1 CP1W-TS101 CPM1A-TS101 4 Analog Points 4 Analog Points - 4 Platinum resistance thermometer inputs (Pt100 or JPt100) - 90 x 86 x 50 2 CP1W-TS102 CPM1A-TS102 3 Analog Points 2 Analog Points 1 Analog Points 4 Platinum resistance thermometer inputs (Pt100 or JPt100) 1 analog output (resolution 1/256) Analogue 90 x 86 x 50 1 - CPM1A-TS101-DA CompoBus/S I/O link unit 16 Points 8 Points 8 Points I/O link of 8 input bits CompoBus/S com- 90 x 66 x 50 and 8 output bits munication 1 CP1W-SRT21 CPM1A-SRT21 PROFIBUS-DP I/O link unit 32 Points 16 Points 16 Points I/O link of 16 input bits PROFIBUS-DP com- 90 x 66 x 50 and 16 output bits munication 1 - CPM1A-PRT21 DeviceNet I/O link unit 64 Points 32 Points 32 Points I/O link of 32 input bits DeviceNet and 32 output bits communication 1 - CPM1A-DRT21 Temperature sensor units (Pt100, JPt100) *1 20 90 x 66 x 50 Some expansion units count for 2 unit numbers (eg. CP1W/CPM1A-AD041, CP1W/CPM1A-DA041, CP1W/CPM1A-TS002 and CP1W/CPM1A-TS102) but only 7 expansion unit numbers can be allocated in a CP1H PLC's configuration. CJ-Series CPU units Modular PLC Fast and powerful CPUs for any task All CJ2M CPU units can be equipped with pulse I/O option modules to perform position control for up to 4 axes, using dedicated instructions. Ordering information Max. digital I/O points Program capacity Data memory Logic execution capacity speed Max. I/O units Width 5 V current Built-in functions consumption Order code 2,560 400 K 832 K 16 ns 40 80 mm 820 mA USB + EtherNet/IP + RS-232C CJ2H-CPU68-EIP 2,560 250 K 512 K 16 ns 40 80 mm 820 mA USB + EtherNet/IP + RS-232C CJ2H-CPU67-EIP 2,560 150 K 352 K 16 ns 40 80 mm 820 mA USB + EtherNet/IP + RS-232C CJ2H-CPU66-EIP 2,560 100 K 160 K 16 ns 40 80 mm 820 mA USB + EtherNet/IP + RS-232C CJ2H-CPU65-EIP 2,560 50 K 160 K 16 ns 40 80 mm 820 mA USB + EtherNet/IP + RS-232C CJ2H-CPU64-EIP 2,560 60 K 160 K 40 ns 40 62 mm 700 mA USB + EtherNet/IP, serial comm. option slot CJ2M-CPU35 2,560 30 K 160 K 40 ns 40 62 mm 700 mA USB + EtherNet/IP, serial comm. option slot CJ2M-CPU34 2,560 20 K 64 K 40 ns 40 62 mm 700 mA USB + EtherNet/IP, serial comm. option slot CJ2M-CPU33 2,560 10 K 64 K 40 ns 40 62 mm 700 mA USB + EtherNet/IP, serial comm. option slot CJ2M-CPU32 2,560 5K 64 K 40 ns 40 62 mm 700 mA USB + EtherNet/IP, serial comm. option slot CJ2M-CPU31 2,560 400 K 832 K 16 ns 40 49 mm 420 mA USB + RS-232C CJ2H-CPU68 2,560 250 K 512 K 16 ns 40 49 mm 420 mA USB + RS-232C CJ2H-CPU67 2,560 150 K 352 K 16 ns 40 49 mm 420 mA USB + RS-232C CJ2H-CPU66 2,560 100 K 160 K 16 ns 40 49 mm 420 mA USB + RS-232C CJ2H-CPU65 2,560 50 K 160 K 16 ns 40 49 mm 420 mA USB + RS-232C CJ2H-CPU64 2,560 60 K 160 K 40 ns 40 31 mm 500 mA USB + RS-232C CJ2M-CPU15 2,560 30 K 160 K 40 ns 40 31 mm 500 mA USB + RS-232C CJ2M-CPU14 2,560 20 K 64 K 40 ns 40 31 mm 500 mA USB + RS-232C CJ2M-CPU13 2,560 10 K 64 K 40 ns 40 31 mm 500 mA USB + RS-232C CJ2M-CPU12 2,560 5K 64 K 40 ns 40 31 mm 500 mA USB + RS-232C CJ2M-CPU11 1,280 60 k 128 k 40 ns 40 69 mm 1,060 mA Loop control engine (300 blocks) CJ1G-CPU45P 1,280 30 k 64 k 40 ns 40 69 mm 1,060 mA Loop control engine (300 blocks) CJ1G-CPU44P 960 20 k 64 k 40 ns 30 69 mm 1,060 mA Loop control engine (300 blocks) CJ1G-CPU43P 960 10 k 64 k 40 ns 30 69 mm 1,060 mA Loop control engine (50 blocks) CJ1G-CPU42P 640 20 k 32 k 100 ns 20 49 mm 640 mA 2 Encoder inputs (100 kHz) 2 Pulse outputs (100 kHz) 4 interrupt/counter inputs CJ1M-CPU23 320 10 k 32 k 100 ns 10 49 mm 640 mA 2 Encoder inputs (100 kHz) 2 Pulse outputs (100 kHz) 4 interrupt/counter inputs CJ1M-CPU22 160 5k 32 k 100 ns 10 49 mm 640 mA 2 Encoder inputs (100 kHz) 2 Pulse outputs (100 kHz) 4 interrupt/counter inputs CJ1M-CPU21 640 20 k 32 k 100 ns 19 62 mm 950 mA 100 base-Tx Ethernet port CJ1M-CPU13-ETN 20 31 mm 580 mA - CJ1M-CPU13 9 62 mm 950 mA 100 base-Tx Ethernet port CJ1M-CPU12-ETN 10 31 mm 580 mA - CJ1M-CPU12 9 62 mm 950 mA 100 base-Tx Ethernet port CJ1M-CPU11-ETN 10 31 mm 580 mA - CJ1M-CPU11 320 160 10 k 5k 32 k 32 k 100 ns 100 ns 21 1 All CPU units support IEC61131-3 Structured text, Sequential Function Charts and ladder language. Omron's extensive function block library helps to reduce your programming effort, while you can create your own function blocks to suit your specific needs. PLC The family of CJ1 and CJ2 CPUs range from very small CPUs for simple sequence control to powerful and fast models that offer total machine control which can handle up to 2560 I/O points. This enables you to modularize or 'slice' your machine into logical sections without changing PLC series. CJ-Series CPU units Modular PLC Accessories Description Remarks Order code High-speed data collection and storage unit, with CF card slot and Ethernet port CPU bus unit CJ1W-SPU01-V2 Pulse I/O option module for CJ2M CPU Units, 2 encoder inputs, 2 pulse outputs NPN (sinking) outputs CJ2M-MD211 Pulse I/O option module for CJ2M CPU Units, 2 encoder inputs, 2 pulse outputs PNP (sourcing) outputs CJ2M-MD212 CompactFlash memory card, 128 MB, for all models (not required for operation) Industrial grade HMC-EF183 CompactFlash memory card, 256 MB, for all models (not required for operation) Industrial grade HMC-EF283 CompactFlash memory card, 512 MB, for all models (not required for operation) Industrial grade HMC-EF583 CompactFlash PC-Card adapter - HMC-AP001 I/O terminal block (40xM3 screw) for CJ1M-CPU2x MIL (40 pt) XW2D-40G6 Servo unit terminal block for 1 axis - XW2B-20J6-8A Servo unit terminal block for 2 axes - XW2B-40J6-9A Connection cable between I/O terminal block and CJ1M-CPU2x ( _ _ _ = length in cm) MIL (40 pt) XW2Z-_ _ _ K SMARTSTEP cable for CJ1M CPU2x, cable length: 1 m - XW2Z-100J-A26 W-series servo cable for CJ1M CPU2x, cable length: 1 m - XW2Z-100J-A27 CX-One, integrated software for programming and configuration of all Omron control system components - CX-ONE-AL_ _ C-E Connection cable, D-Sub 9-pin PC serial port to PLC peripheral port (length: 2.0 m) - CS1W-CN226 Connection cable, D-Sub 9-pin PC serial port to PLC peripheral port (length: 6.0 m) - CS1W-CN626 USB to serial conversion cable - CS1W-CIF31 RS-232C Option Board*1 - CP1W-CIF01 RS-422A/485 Option board*1 - CP1W-CIF11 RS422A/485 (isolated) Option board*1 - CP1W-CIF12 Battery Set*2 - CJ1W-BAT01 USB Programming cable - CP1W-CN221 *1 *2 Only used with CJ2M-CPU3_ Included with the CPU unit Note: MIL = connector according to MIL-C-83503 (compatible with DIN 41651/IEC 60603-1). 22 CJ-Series power supplies, expansions Modular PLC Power and flexibility 1 Depending on the CPU type, up to 3 expansions can be connected to the CPU 'rack', giving a total capacity of 40 I/O units. The total length of the expansion cables of one system may be up to 12 m. PLC CJ systems can operate on 24 VDC power supply, or on 100 to 240 VAC mains. For small-scale systems with mainly digital I/O a low cost, small capacity power supply can be used. For systems with many analogue I/Os and control/communication units, it may be necessary to use a larger power supply unit. Ordering information Power supply Input range Power consumption Output capacity at 5 VDC Output capacity at 24 VDC Max. output power Features Width Order code 21.6 to 26.4 VDC 35 W max. 2.0 A 0.4 A 16.6 W - 27 mm CJ1W-PD022 19.2 to 28.8 VDC 50 W max. 5.0 A 0.8 A 25 W - 60 mm CJ1W-PD025 85 to 264 VAC 47 to 63 Hz 50 VA max. 2.8 A 0.4 A 14 W - 45 mm CJ1W-PA202 100 VA max. 5.0 A 0.8 A 25 W Run output (SPST relay) 80 mm CJ1W-PA205R Maintenance status display 80 mm CJ1W-PA205C Width, Length Order code Note: The CJ1W-PD022 has no galvanic isolation I/O expansion Type Description I/O control unit Required unit on CPU 'rack' to connect I/O expansions 20 mm CJ1W-IC101 I/O interface unit Start unit for each I/O expansion 'rack'. Requires a power supply unit. 31 mm CJ1W-II101 I/O expansion cable Connects CJ1W-IC101 or -II101 to the next expansion rack's -II101 0.3 m CS1W-CN313 0.7 m CS1W-CN713 2.0 m CS1W-CN223 3.0 m CS1W-CN323 5.0 m CS1W-CN523 10 m CS1W-CN133 12 m CS1W-CN133-B2 23 CJ-Series digital I/O units Modular PLC 8 to 64 points per unit - input, output or mixed Digital I/O units serve as the PLC's interface to achieve fast, reliable sequence control. A full range of units, from high-speed DC inputs to relay outputs, let you adapt CJ1 to your needs. CJ1 units are available with various I/O densities and connection technologies. Up to 16 I/O points can be wired to units with detachable M3 screw terminals or screwless clamp terminals. High-density 32- and 64- point I/O units are equipped with standard 40-pin flat cable-connectors. Prefabricated cables and wiring terminals are available for easy interfacing to high-density I/O units. Ordering information Points Type Width Remarks Connection type*1 Order code 16 AC input 120 VAC 7 mA 31 mm - M3 CJ1W-IA111 8 AC input 240 VAC 10 mA 31 mm - M3 CJ1W-IA201 8 DC input 24 VDC 10 mA 31 mm - M3 CJ1W-ID201 16 DC input 24 VDC 7 mA 31 mm - M3 Screwless CJ1W-ID211 CJ1W-ID211(SL) 16 DC input 24 VDC 7 mA 31 mm Fast-response (15 s ON, 90 s OFF) M3 CJ1W-ID212 16 DC input 24 VDC 7 mA 31 mm Inputs start interrupt tasks in PLC program M3 CJ1W-INT01 16 DC input 24 VDC 7 mA 31 mm Latches pulses down to 50 s pulse width M3 CJ1W-IDP01 32 DC input 24 VDC 4.1 mA 20 mm - 1 x Fujitsu CJ1W-ID231 32 DC input 24 VDC 4.1 mA 20 mm - 1 x MIL*1 (40 pt) CJ1W-ID232 32 DC input 24 VDC 4.1 mA 20 mm Fast-response (15 s ON, 90 s OFF) 1 x MIL*1 (40 pt) CJ1W-ID233 64 DC input 24 VDC 4.1 mA 31 mm - 2 x Fujitsu CJ1W-ID261 64 DC input 24 VDC 4.1 mA 31 mm - 2 x MIL*1 (40 pt) CJ1W-ID262 0.6 mA 31 mm - M3 CJ1W-OA201 Rated voltage Rated current 8 Triac output 250 VAC 8 Relay output 250 VAC 2 A 31 mm - M3 Screwless CJ1W-OC201 CJ1W-OC201(SL) 16 Relay output 250 VAC 2 A 31 mm - M3 Screwless CJ1W-OC211 CJ1W-OC211(SL) 8 DC output (sink) 12 to 24 VDC 2 A 31 mm - M3 CJ1W-OD201 8 DC output (source) 24 VDC 2 A 31 mm With short-circuit protection, alarm M3 CJ1W-OD202 8 DC output (source) 24 VDC 0.5 A 31 mm With short-circuit protection, alarm M3 CJ1W-OD204 12 to 24 VDC 0.5 A 31 mm - M3 Screwless CJ1W-OD211 CJ1W-OD211 (SL) 24 VDC 0.5 A 31 mm With short-circuit protection, alarm M3 Screwless CJ1W-OD212 CJ1W-OD212 (SL) 16 DC output (sink) 16 DC output (source) 16 DC output (sink) 24 VDC 0.5 A 31 mm Fast-response (15 s ON, 80 s OFF) M3 CJ1W-OD213 32 DC output (sink) 12 to 24 VDC 0.5 A 20 mm - 1 x Fujitsu CJ1W-OD231 32 DC output (source) 24 VDC 0.3 A 20 mm With short-circuit protection, alarm 1 x MIL*1 (40 pt) CJ1W-OD232 32 DC output (sink) 24 VDC 0.5 A 20 mm Fast-response (15 s ON, 80 s OFF) 1 x MIL*1 (40 pt) CJ1W-OD234 64 DC output (sink) 12 to 24 VDC 0.3 A 31 mm - 2 x Fujitsu CJ1W-OD261 64 DC output (source) 24 VDC 0.3 A 31 mm - 2 x MIL*1 (40 pt) CJ1W-OD262 16 +16 DC in+out (source) 24 VDC 0.5 A 31 mm - 2 x MIL*1 (20 pt) CJ1W-MD232 32 +32 DC in+out (sink) 24 VDC 0.3 A 31 mm - 2 x MIL*1 (40 pt) CJ1W-MD263 32 +32 DC in+out (TLL) 5 VDC 35 mA 31 mm - 2 x MIL*1 (40 pt) CJ1W-MD563 Description Connection type Order code Replacement 18-point screwless terminal blocks for I/O units, pack of 5 pcs. Screwless CJ-WM01-18P-5 Replacement 18-point screw terminal blocks for I/O units, pack of 5 pcs. M3 CJ-OD507-18P-5 I/O terminal block (40xM3 screw) for XW2Z-_ _ _ K MIL (40pt) XW2D-40G6 Connection cable between I/O terminal block and I/O unit ( _ _ _ = length in cm) MIL (40pt) XW2Z-_ _ _ K *1 MIL = connector according to MIL-C-83503 (compatible with DIN 41651/IEC 60603-1). Note: All digital I/O unit are designated as basic I/O units. Accessories 24 CJ-Series analogue I/O and control units Modular PLC From basic analogue I/O to advanced temperature control Ordering information Accuracy *1 Points Type Ranges Resolution 4 0 to 5V 1 to 5V 0 to 10 V 0 to 20 mA 4 to 20 mA K, J, T, L, R, S, B Pt100, Pt1000, JPt100 V / I: 1/12000 V: 0.3% T/C: 0.1 C I: 0.3% RTD: 0.1 C T/C: 0.3% RTD: 0.3% 4 Universal analogue input Analogue input 0 0 -10 1 4 to to to to to 5 V, 10 V, 10 V, 5 V, 20 mA 1/8,000 V: I: 0.2% 0.4% Conversion time Width Remarks 250 ms/4 point 31 mm Universal inputs, with zero/span adjustment, M3 configurable alarms, scaling, sensor error Screwless detection 250 s/point 31 mm Offset/gain adjustment, peak hold, moving average, alarms 4 High-speed analogue input 1 0 -5 -10 4 to to to to to 5 V, 10 V, 5 V, 10 V, 20 mA 1/40,000 V: I: 0.2% 0.4% 8 Analogue input 1 0 -10 1 4 to to to to to 5 V, 10 V, 10 V, 5 V, 20 mA 1/8,000 V: I: 0.2% 0.4% 0 0 -10 1 4 to to to to to 5 V, 10 V, 10 V, 5 V, 20 mA 1/4,000 V: I: 0.3% 0.5% 1 ms/point 31 mm Offset/gain adjustment, output hold 1 0 -10 1 4 to to to to to 5 V, 10 V, 10 V, 5 V, 20 mA 1/4,000 V: I: 0.3% 0.5% 1 ms/point 31 mm Offset/gain adjustment, output hold 2 4 Analogue output Analogue output 4 High-speed analogue output 1 to 0 to -10 to 5 V, 10 V, 10 V 1/40,000 0.3% 8 Voltage output 0 0 -10 1 5 V, 10 V, 10 V, 5V 1/8,000 0.3% 20 mA 1/8,000 8 4+2 Current output Analogue in + output to to to to 4 to 1 0 -10 1 4 to to to to to 5 V, 10 V, 10 V, 5 V, 20 mA 1/8,000 0.5% in: 0.2% out: 0.3% 4 Universal analogue DC voltage, input DC current, Thermocouple, Pt100/Pt1000, potentiometer 1/256000 0.05% 2 Process input 1/64,000 0.05% 4 0 0 -10 0 -5 1 0 1.25 to 20 mA to 20 mA to 10 V, to 10 V, to 5 V, to 5 V, to 5 V, to 1.25 V, to 1.25 V Connection type 31 mm Offset/gain adjustment, peak hold, moving average, alarms 250 s/point 31 mm Offset/gain adjustment, output hold 31 mm Offset/gain adjustment, output hold CJ1W-AD041-V1 CJ1W-AD041-V1 (SL) CJ1W-AD042 M3 CJ1W-AD081-V1 Screwless CJ1W-AD081-V1 (SL) M3 CJ1W-DA021 Screwless CJ1W-DA021 (SL) M3 CJ1W-DA041 Screwless CJ1W-DA041 (SL) CJ1W-DA042V M3 CJ1W-DA08V Screwless CJ1W-DA08V (SL) M3 CJ1W-DA08C Screwless CJ1W-DA08C (SL) 1 ms/point 31 mm Offset/gain adjustment, scaling, peak hold, M3 moving average, alarms, output hold Screwless 60 ms/4 points 31 mm All inputs individually isolated, configurable M3 alarms, maintenance functions, user-defined scaling, zero/span adjustment 5 ms/point 31 mm Configurable alarms, maintenance functions, user-defined scaling, zero/span adjustment, square root, totaliser CJ1W-AD04U(SL) Screwless 35 s/4 points 31 mm Direct conversion (CJ2H special instruction) M3 250 s/point CJ1W-AD04U M3 35 s/4 points 31 mm Direct conversion (CJ2H special instruction) M3 250 s/point Order code M3 CJ1W-MAD42 CJ1W-MAD42 (SL) CJ1W-PH41U CJ1W-PDC15 25 1 Advanced units with built-in scaling, filtering and alarm functions reduce the need for complex PLC programming. High-accuracy process I/O units support an extensive range of sensors, for fast and accurate data acquisition. Temperature control units relieve the PLC CPU of PID calculations and alarm monitoring. These functions are handled autonomously by the unit, offering control performance and auto-tuning functions similar to stand-alone temperature controllers. PLC The CJ-series offers a wide choice of analogue input units, fit for any application, from low-speed, multi-channel temperature measurement to high-speed, high-accuracy data acquisition. Analogue outputs can be used for accurate control or external indication. CJ-Series analogue I/O and control units Accuracy *1 Points Type Ranges 2 Thermocouple input B, E, J, K, L, N, R, S, 1/64,000 T, U, WRe5-26, PLII, -100 to 100 mV 0.05% 5 ms/point 31 mm Configurable alarms, maintenance functions M3 CJ1W-PTS15 2 Resistance thermometer input Pt50, Pt100, JPt100, 1/64,000 Ni508.4 0.05% 5 ms/point 31 mm Configurable alarms, maintenance functions M3 CJ1W-PTS16 4 Thermocouple Input B, J, K, L, R, S, T 0.1C 0.3% 62.5 ms/point 31 mm 4 configurable alarm outputs M3 CJ1W-PTS51 4 Resistance thermometer input Pt100, JPt100 0.1C 0.3% 62.5 ms/point 31 mm 4 configurable alarm outputs M3 CJ1W-PTS52 6 Thermocouple input K-type (-200 to 1,300C) J-Type (-100 to 850C) 0.1C 0.5% 40 ms/point 31 mm Basic I/O unit, setup by DIP switches, adjustable filtering 10/50/60 Hz M3 CJ1W-TS561 Screwless CJ1W-TS561 (SL) Resistance thermometer input Pt100 (-200 to 650C) Pt1000 (-200 to 650C) 0.1C 40 ms/point 31 mm Basic I/O unit, setup by DIP switches, adjustable filtering 10/50/60 Hz M3 CJ1W-TS562 Screwless CJ1W-TS562 (SL) 6 Resolution 0.5% Conversion time Width Remarks Modular PLC Connection type Order code 4 Temperature con- B, J, K, L, trol loops, Thermo- R, S, T couple 0.1C 0.3% 500 ms total 31 mm 4 control outputs: PNP open collector, 100 mA max. M3 CJ1W-TC002 2 Temperature con- B, J, K, L, trol loops, Thermo- R, S, T couple 0.1C 0.3% 500 ms total 31 mm 2 control outputs: PNP open M3 collector, 100 mA max., 2 current transformer inputs for heater burnout detection. CJ1W-TC004 4 Temperature con- Pt100, JPt100 trol loops, RTD 0.1C 0.3% 500 ms total 31 mm 4 control outputs: PNP open collector, 100 mA max. M3 CJ1W-TC102 2 Temperature con- Pt100, JPt100 trol loops, RTD 0.1C 0.3% 500 ms total 31 mm 2 control outputs: PNP open M3 collector, 100 mA max., 2 current transformer inputs for heater burnout detection. CJ1W-TC104 1 Weighing unit 31 mm Self-contained unit designed for feed weigh- M3 ing, discharge weighing, hopper scales, packing scales, bag filling, etc. Made by Unipulse Co. CJ1W-F159 *1 10 V DC, max. four 24 bit, 0.3V/ Linearity error: 2 ms 350 load cells count <0.01% FS Accuracy for Voltage and Current Inputs/Outputs as percentage of full scale and typical value at 25C ambient temperature (Consult the operation manual for details) Accuracy for Temperature Inputs/Outputs as percentage of process value and typical value at 25C ambient temperature (Consult the operation manual for details) Note: All Analogue I/O units are designated as Special I/O units, except TS561/TS562, which are Basic I/O units (cannot be used with CP1H). Accessories Description Connection type Order code Replacement 18-point screwless terminal blocks for I/O units, pack of 5 pcs. Screwless CJ-WM01-18P-5 Replacement 18-point screw terminal blocks for I/O units, pack of 5 pcs. M3 CJ-OD507-18P-5 26 CJ-Series motion/position control units Modular PLC Add motion control to any CJ-Series PLC Ordering information Channels/ Type Axes Signal type Unit class Width Remarks Connection type Order code 2 SSI inputs (absolute position data) Synchronous serial protocol Special I/O unit 31 mm Baud rate, encoding type, data length, etc. can be set per channel M3 screw CJ1W-CTS21-E 2 500 kHz Counter 24 V, line driver Special I/O unit 31 mm 2 configurable digital inputs + outputs 1 x Fujitsu (40 pt) CJ1W-CT021 4 100 kHz Counter Line driver, 24 V via terminal block Special I/O unit 31 mm Target values trigger interrupt to CPU 1 x MIL (40 pt) CJ1W-CTL41-E 1 DC Motor Control unit PWM (24 V/4 A) Special I/O unit 31 mm 4 configurable digital inputs + 50 kHz counter input 3 x Screwless 2 Pulse I/O option module for 24 V, line driver CJ2M CPU CPU Option Module 20 mm 100 kpps encoder inputs and pulse outputs, NPN (sinking), interrupt / fast response inputs 1 x MIL (40 pt) CJ2M-MD211 2 Pulse I/O option module for 24 V, line driver CJ2M CPU CPU Option Module 20 mm 100 kpps encoder inputs and pulse outputs, PNP (sourcing), interrupt / fast response inputs 1 x MIL (40 pt) CJ2M-MD212 1 Position Control unit 24 V open collector Special I/O unit 31 mm 500 kpps pulse outputs, inputs for origin, limit switches, stop, interrupt 1 x Fujitsu (40 pt) CJ1W-NC113 2 Position Control unit 24 V open collector Special I/O unit 31 mm 500 kpps pulse outputs, inputs for origin, limit switches, stop, interrupt 1 x Fujitsu (40 pt) CJ1W-NC213 4 Position Control unit 24 V open collector Special I/O unit 31 mm 500 kpps pulse outputs, inputs for origin, limit switches, stop, interrupt 2 x Fujitsu (40 pt) CJ1W-NC413 2 Position Control Unit High 24 V open collector speed type Special I/O Unit 51 mm 500 kpps pulse outputs, built-in feedback pulse counters, synchronous multi-axis control MIL CJ1W-NC214 4 Position Control Unit High 24 V open collector speed type Special I/O Unit 62 mm 500 kpps pulse outputs, built-in feedback pulse counters, synchronous multi-axis control MIL CJ1W-NC414 2 Position Control Unit EtherCAT CPU bus unit 31 mm Position, speed and torque control, access to all drive parameters RJ45 CJ1W-NC281 4 Position Control Unit EtherCAT CPU bus unit 31 mm Position, speed and torque control, access to all drive parameters RJ45 CJ1W-NC481 4 Position Control Unit EtherCAT CPU bus unit 31 mm Position, speed and torque control, RJ45 access to all drive parameters, supports up to 64 general purpose EtherCAT slaves CJ1W-NC482 8 Position Control Unit EtherCAT CPU bus unit 31 mm Position, speed and torque control, access to all drive parameters RJ45 CJ1W-NC881 8 Position Control Unit EtherCAT CPU bus unit 31 mm Position, speed and torque control, RJ45 access to all drive parameters, supports up to 64 general purpose EtherCAT slaves CJ1W-NC882 16 Position Control Unit EtherCAT CPU bus unit 31 mm Position, speed and torque control, access to all drive parameters RJ45 CJ1W-NCF81 2 Position Control Unit MECHATROLINK-II CPU bus unit 31 mm Position, speed and torque control, access to all drive parameters ML-II CJ1W-NC271 4 Position Control Unit MECHATROLINK-II CPU bus unit 31 mm Position, speed and torque control, access to all drive parameters ML-II CJ1W-NC471 16 Position Control unit MECHATROLINK-II CPU bus unit 31 mm Position, speed and torque control, access to all drive parameters ML-II CJ1W-NCF71 30 Advanced Motion Control MECHATROLINK-II, unit Encoder I/O, digital I/O CPU bus unit 49 mm Trajexia Motion Controller on the CJ-series ML-II, 9-pin D-Sub, screwless push-in CJ1W-MCH72 CJ1W-DCM11-E Note: Line driver signal type units also available. 27 1 * Counter units gather position information from SSI- or incremental encoders. Actual positions are compared with internally stored target values. * CJ2M CPU Units have dedicated positioning functions that can be used by installing up to 2 Pulse I/O option modules. * Position Control units are used for point-to-point positioning with servo drives or stepper motors. Target data and acceleration/deceleration curves can be adjusted on-the-fly. * Position- and Motion Control units equipped with EtherCAT or MECHATROLINK-II interface can control multiple drives through a single high-speed link. Message routing through multiple communication layers allows the attached drives to be configured from any point in the control network. PLC From simple position measurement to multi-axis synchronised motion control, the CJ-Series offers a full range of units: CJ-Series motion/position control units Modular PLC Accessories Description Connection type Order code General purpose I/O terminal block (40xM3 screw) MIL (40 pt) XW2D-40G6 Screwless terminal block for connecting 24 V or Line driver encoders to CJ1W-CTL41-E MIL (40 pt.) to 32 pt. screwless clamp XW2G-40G7-E General purpose I/O connection cable for I/O units with 40-pt. Fujitsu connector ( _ _ _ = length in cm) Fujitsu (40 pt.) to MIL (40 pt.) XW2Z-_ _ _ B General purpose I/O connection cable for I/O units with 40-pt. MIL connector ( _ _ _ = length in cm) 2 x MIL (40 pt) XW2Z-_ _ _ K Servo relay unit 1-Axis position control unit - XW2B-20J6-1B Servo relay unit 2-Axes position control unit - XW2B-40J6-2B Cable connecting servo relay unit to Position control unit CJ1W-NC113, cable length 1 m. For Accurax G5 servo drives. - XW2Z-100J-A14 Cable connecting servo relay unit to Position control unit CJ1W-NC213/413, cable length 1 m. For Accurax G5 servo drives. - XW2Z-100J-A15 Cable connecting servo relay unit to Position control unit CJ1W-NC113, cable length 1 m. For SmartStep 2 servo drives. - XW2Z-100J-A14 Cable connecting servo relay unit to Position control unit CJ1W-NC213/413, cable length 1 m. For SmartStep 2 servo drives. - XW2Z-100J-A15 Cable connecting servo relay unit to Position control unit CJ1W-NC133, cable length 1 m. For Accurax G5 servo drives. - XW2Z-100J-A18 Cable connecting servo relay unit to Position control unit CJ1W-NC233/433, cable length 1 m. For Accurax G5 servo drives. - XW2Z-100J-A19 Cable connecting servo relay unit to Position control unit CJ1W-NC133, cable length 1 m. For SmartStep 2 servo drives. - XW2Z-100J-A18 Cable connecting servo relay unit to Position control unit CJ1W-NC233/433, cable length 1 m. For SmartStep 2 servo drives. - XW2Z-100J-A19 Cable connecting servo relay unit to Accurax G5 servo drives, cable length 1 m. - XW2Z-100J-B25 Cable connecting servo relay unit to SmartStep 2 servo drive, cable length 1 m. - XW2Z-100J-B29 28 CJ-Series communication units Modular PLC Open to any communication Ordering information Type Ports Serial 2 x RS-232C Serial 2 x RS-232C Serial Data transfer Protocols Unit class Width Connection type Order code CompoWay/F, Host link, NT link, Modbus, User-defined CPU bus unit 31 mm 9-pin D-Sub CJ1W-SCU21-V1 CompoWay/F, Host link, NT link, Modbus, User-defined CPU bus unit 31 mm 9-pin D-Sub CJ1W-SCU22 2 x RS-422A/RS-485 CompoWay/F, Host link, NT link, Modbus, User-defined CPU bus unit 31 mm 9-pin D-Sub CJ1W-SCU31-V1 Serial 2 x RS-422A/RS-485 High-speed CompoWay/F, Host link, NT link, Modbus, User-defined CPU bus unit 31 mm 9-pin D-Sub CJ1W-SCU32 Serial 1 x RS-232C + 1 x RS-422/RS-485 CompoWay/F, Host link, NT link, Modbus, User-defined CPU bus unit 31 mm 9-pin D-Sub CJ1W-SCU41-V1 Serial 1 x RS-232C + High-speed 1 x RS-422/RS-485 CompoWay/F, Host link, NT link, Modbus, User-defined CPU bus unit 31 mm 9-pin D-Sub CJ1W-SCU42 Ethernet 1 x 100 Base-Tx UDP, TCP/IP, FTP server,SMTP (e-mail), SNTP (time adjust), CPU bus unit FINS routing, socket service 31 mm RJ45 CJ1W-ETN21 EtherNet/IP 1 x 100 Base-Tx High-speed EtherNet/IP, UDP, TCP/IP, FTP server, SNTP, SNMP CPU Bus unit 31 mm RJ45 CJ1W-EIP21 Controller link 2-wire twisted pair Omron proprietary CPU bus unit 31 mm 2-wire screw + GND CJ1W-CLK21-V1 DeviceNet DeviceNet CPU bus unit 31 mm 5-p detachable CJ1W-DRM21 PROFIBUS-DP 1 x RS-485 (Master) DP, DPV1 CPU bus unit 31 mm 9-pin D-Sub CJ1W-PRM21 PROFIBUS-DP 1 x RS-485 (Slave) DP Special I/O unit 31 mm 9-pin D-Sub CJ1W-PRT21 PROFINET-IO 1 x 100 Base-Tx PROFINET-IO Controller, FINS/UDP CPU Bus unit 31 mm RJ45 CJ1W-PNT21 CAN 1 x CAN User-defined, supports 11-bit and 29-bit identifiers CPU bus unit 31 mm 5-p detachable CJ1W-CORT21 CompoNet 4-wire, data + power to slaves (Master) CompoNet (CIP-based) Special I/O unit 31 mm 4-p detachable IDC or screw CJ1W-CRM21 Omron proprietary Special I/O unit 20 mm 2-wire screw + 2-wire power CJ1W-SRM21 1 x CAN CompoBus/S 2-wire (Master) Accessories Description Connection type Order code RS-232C to RS-422/RS-485 signal converter. Mounts directly on serial port. 9-pin D-sub to screw clamp terminals CJ1W-CIF11 Controller link PCI board with support software PCI, wired CLK 3G8F7-CLK21-EV1 Controller link repeater unit (wire to wire) Screw - Screw CS1W-RPT01 Controller link repeater unit (wire to HPCF fiber) Screw - HPCF connector CS1W-RPT02 Controller link repeater unit (wire to graded-index glass fiber) Screw - ST connector CS1W-RPT03 29 1 Omron supports the 2 major field networks, DeviceNet and PROFIBUS-DP. For high-speed field I/O, Omron's own CompoBus/S offers an unsurpassed ease of installation. Fully user-configurable serial and CAN-based communication can be used to emulate a variety of application-specific protocols. EtherNet/IP units provide data link functions to share large amounts of data between PLCs. The new PROFINETIO controller together with the SmartSlice modular I/O system offers Ethernet based I/O with controller- and network redundancy. PLC The CJ-Series offers both standardised open networks interfaces, and cost-efficient high-speed proprietary network links. Datalinks between PLCs, or to higher-level information systems can be made using serial or Ethernet links, or the easy-to-use controller link network. CS-Series CPU units Rack PLC Fast and powerful CPUs for any task Omron's CS1-series CPUs are available in two processor speeds, each in various memory capacities. Besides the basic CPU models, versions are available for dual redundant operation, supporting I/O hot-swapping. All CPUs have one dedicated board slot with a direct CPU-bus connection, in which a serial communication board or a loop control board can be mounted. All CPU units support IEC61131-3 structured text and ladder language. Omron's extensive function block library helps to reduce your programming effort, while you can create your own function blocks to suit your specific needs. Ordering information Max. Digital I/O Program points capacity 5120 250K steps Data memory capacity 448K words Logic execution speed Max. I/O units Additional functions Order code 20 ns 80 - CS1H-CPU67H 71 Supports duplex power supply and I/O hot-swapping CS1D-CPU67S 68 CPU for full dual-redundancy CS1D-CPU67H CPU for full dual-redundancy, with loop control board CS1D-CPU67P 120K steps 256K words 80 - CS1H-CPU66H 60K steps 128K words 80 - CS1H-CPU65H 71 Supports duplex power supply and I/O hot-swapping CS1D-CPU65S 68 CPU for full dual-redundancy CS1D-CPU65H CPU for full dual-redundancy, with loop control board CS1D-CPU65P - CS1H-CPU64H - CS1H-CPU63H - CS1G-CPU45H 40 - CS1G-CPU44H 35 Supports duplex power supply and I/O hot-swapping CS1D-CPU44S 30 - CS1G-CPU43H - CS1G-CPU42H Supports duplex power supply and I/O hot-swapping CS1D-CPU42S Description Remarks Order code High-speed data collection and storage unit, with CF card slot and Ethernet port CPU bus unit CS1W-SPU01-V2 High-speed data collection and storage unit, with CF card slot and 2 Ethernet ports CPU bus unit CS1W-SPU02-V2 Duplex unit, required for CS1D-CPU6_H systems - CS1D-DPL01 Serial communication option board, 2 x RS-232C - CS1W-SCB21-V1 Serial communication option board, 1 x RS-232C + 1 x RS422/RS-485 - CS1W-SCB41-V1 Loop control option board 50 control blocks max. CS1W-LCB01 Loop control option board 300 control blocks max. CS1W-LCB05 Replacement battery set, for all CS1 CPUs - CS1W-BAT01 Compact Flash memory card, 128 MB, for all models (not required for operation) Industrial grade HMC-EF183 Compact Flash memory card, 256 MB, for all models (not required for operation) Industrial grade HMC-EF283 Compact Flash memory card, 512 MB, for all models (not required for operation) Industrial grade HMC-EF583 Compact Flash PC-Card adapter - HMC-AP001 30K steps 64K words 80 20K steps 60K steps 1280 960 40 ns 30K steps 20K steps 10K steps 26 Accessories CX-One, integrated software for programming and configuration of all Omron control system com- - ponents CX-ONE-AL_ _ C-E Connection cable, D-Sub 9-pin PC serial port to PLC peripheral port length: 2.0 m CS1W-CN226 Connection cable, D-Sub 9-pin PC serial port to PLC peripheral port length: 6.0 m CS1W-CN626 USB to serial conversion cable - CS1W-CIF31 30 CS-Series power supplies, backplanes Rack PLC Expand with up to 7 racks 1 PLC racks are available in several sizes, from 2 to 10 slots wide. Special backplanes are required for duplex systems. Depending on the CPU type, up to 7 expansions can be connected to the CPU rack, giving a total capacity of 80 I/O units. The total length of the expansion cables of one system may be up to 12 m. PLC CS1 systems can operate on 24 VDC power supply, or on 100-240 VAC mains. For small-scale systems with mainly digital I/O a low cost, small capacity power supply can be used. For systems with many analogue I/Os and control/communication units, it may be necessary to use a larger power supply unit. Ordering information Power supplies Input range Power consumption 19.2 to 28.8 VDC 40 W max. 55 VA max. 85 to 264 VAC 50/60 Hz 120 VA max. Output capacity 5 VDC Output capacity 26 VDC Max. output power Extra functions Order code 6.6 A 0.62 A 30 W - C200HW-PD024 4.3 A 0.56 A 28 W Power supply for dual-redundant system CS1D-PD024 5.3 A 1.3 A 40 W - C200HW-PD025 Power supply for dual-redundant system CS1D-PD025 Maintenance status display C200HW-PA204C - C200HW-PA204 Service output 24 VDC, 0.8 A C200HW-PA204S Run status output (SPST relay) C200HW-PA204R 4.6 A 0.62 A 30 W 85 to 132 VAC, 170 to 264 VAC, 50/60 Hz 180 VA max. 9.0 A 1.3 A 45 W Run status output (SPST relay) C200HW-PA209R 150 VA max. 7.0 A 1.3 A 35 W Power supply for dual-redundant system CS1D-PA207R Type Slots Expansion connector Width Special functions Order code CPU backplane 2 No 200 mm - CS1W-BC023 CPU backplane 3 Yes 260 mm - CS1W-BC033 CPU backplane 5 Yes 330 mm - CS1W-BC053 CPU backplane 8 Yes 435 mm - CS1W-BC083 CPU backplane 10 Yes 505 mm - CS1W-BC103 Expansion backplane 3 Yes 260 mm - CS1W-BI033 Expansion backplane 5 Yes 330 mm - CS1W-BI053 Expansion backplane 8 Yes 435 mm - CS1W-BI083 Expansion backplane 10 Yes 505 mm - CS1W-BI103 CPU backplane 5 Yes 505 mm For Duplex CPU + Power supplies CS1D-BC052 CPU backplane 8 Yes 505 mm For Duplex Power supplies CS1D-BC082S Expansion backplane 9 Yes 505 mm For Duplex Power supplies CS1D-BI092 Type Remarks Specifications I/O Expansion cable to connect CS1 CPU backplane or Expansion backplane to next Expansion backplane. Order code 0.3 m CS1W-CN313 0.7 m CS1W-CN713 2.0 m CS1W-CN223 3.0 m CS1W-CN323 5.0 m CS1W-CN523 10.0 m CS1W-CN133 12.0 m CS1W-CN133-B2 31 CS-Series digital I/O units Rack PLC Up to 96 I/O points per unit - input, output or mixed Digital I/O units serve as the PLC's interface to achieve fast, reliable sequence control. A full range of units, from high-speed DC inputs to relay outputs, let you adapt CS1 to your needs. CS1 units are available with various I/O densities and connection technologies. Up to 16 I/O points can be wired to units with detachable M3 screw terminals directly. High-density 32- and 64- point I/O units are equipped with standard 40-pin connectors. Prefabricated cables and wiring terminals are available for easy interfacing to high-density I/O units. Ordering information Connection type Order code *1 10 mA - M3 CS1W-IA111 10 mA - M3 CS1W-IA211 24 VDC 7 mA - M3 CS1W-ID211 DC input 24 VDC 7 mA Inputs start interrupt tasks in PLC program M3 CS1W-INT01 16 DC input 24 VDC 7 mA Latches pulses down to 50 s pulse width M3 CS1W-IDP01 32 DC input 24 VDC 6 mA - 1x40 pt Fujitsu CS1W-ID231 64 DC input 24 VDC 6 mA - 2x40 pt Fujitsu CS1W-ID261 96 DC input 24 VDC 5 mA - 2x56 pt Fujitsu CS1W-ID291 8 Triac output 250 VAC 1.2 A - M3 CS1W-OA201 16 Triac output 250 VAC 0.5 A - M3 CS1W-OA211 8 Relay output 250 VAC 2.0 A - M3 CS1W-OC201 16 Relay output 250 VAC 2.0 A - M3 CS1W-OC211 16 DC output (sink) 12 to 24 VDC 0.5 A - M3 CS1W-OD211 16 DC output (source) 0.5 A With short-circuit protection, alarm M3 CS1W-OD212 32 DC output (sink) 0.5 A - 1x40 pt Fujitsu CS1W-OD231 32 DC output (source) 0.5 A With short-circuit protection, alarm 1x40 pt Fujitsu CS1W-OD232 64 DC output (sink) 0.3 A - 2x40 pt Fujitsu CS1W-OD261 64 DC output (source) 0.3 A With short-circuit protection, alarm 2x40 pt Fujitsu CS1W-OD262 96 DC output (sink) 12 to 24 VDC 0.1 A - 2x56 pt Fujitsu CS1W-OD291 96 DC output (source) 24 VDC 0.1 A - 2x56 pt Fujitsu CS1W-OD292 32+32 DC output (sink) 12 to 24 VDC 0.3 A - 2x40 pt Fujitsu CS1W-MD261 32+32 DC in+out (source) 0.3 A With short-circuit protection, alarm 2x40 pt Fujitsu CS1W-MD262 48+48 DC output (sink) 12 to 24 VDC 0.1 A - 2x56 pt Fujitsu CS1W-MD291 48+48 DC in+out (source) 12 to 24 VDC 0.1 A - 2x56 pt Fujitsu CS1W-MD292 Points Type 16 AC or DC input 120 VAC or VDC 16 AC input 240 VAC 16 DC input 16 *1 Rated voltage 24 VDC 12 to 24 VDC 24 VDC 12 to 24 VDC 24 VDC 24 VDC C200H I/O units can also be mounted, except on CS1D systems. Note: All Digital I/O units are designated as Basic I/O units. 32 Rated current Remarks CS-Series analogue and process I/O units Rack PLC From basic analogue I/O to process control 1 Advanced units with built-in scaling, filtering and alarm functions reduce the need for complex PLC programming. High-accuracy process I/O units support an extensive range of sensors, for fast and accurate data acquisition. All process and temperature I/O units provide isolation between all individual channels. PLC CS1 offers a wide choice of analogue input units, fit for any application, from lowspeed, multi-channel temperature measurement to high-speed, high-accuracy data acquisition. Analogue outputs can be used for accurate control or external indication. Ordering information Points Type 4 Analogue input 8 Analogue input 18 Analogue input 4 Ranges Resolution Accuracy*1 V: I: 0 to 0 to -10 to 1 to 4 to 5 V, 10 V, 10 V, 5 V, 20 mA 1/8,000 Analogue output 0 to 0 to -10 to 1 to 4 to 5 V, 10 V, 10 V, 5 V, 20 mA 1/4,000 8 Voltage output 0 to 0 to -10 to 1 to 5 V, 10 V, 10 V, 5V 8 Current output 4 to 4+4 Analogue in + output 0 to 5 V, 0 to 10 V, -10 to 10 V, 1 to 5V (4 to 20 mA input) 1/8,000 4 Process input 4 to 20 mA, 0 to 20 mA, 0 to 10 V, -10 to 10 V, 0 to 5 V, -5 to 5 V, 1 to 5 V, 1 to 1.25 V, -1.25 to 1.25 V 8 Process input 4 Thermocouple input 4 Resistance thermometer input Pt50, Pt100 JPt100, Ni508.4 1/64,000 4 Thermocouple input 4 Resistance thermometer input Pt100, JPt100 8 Thermocouple input 8 0.2% of PV 0.4% of PV Conversion time 250 s/point Remarks Connection type Order code Offset/gain adjustment, peak hold, moving average, alarms M3 CS1W-AD041-V1 M3 CS1W-AD081-V1 0.2% of PV V: I: 0.3% of PV 0.5% of PV 2 x MIL (34p.) CS1W-AD161 1 ms/point 0.3% of PV 20 mA Offset/gain adjustment M3 CS1W-DA041 Offset/gain adjustment, output hold M3 CS1W-DA08V M3 CS1W-DA08C 0.5% of PV V in: 0.2% of PV I in: 0.4% of PV out: 0.3% of PV 1 ms/point Offset/gain adjustment, scaling, peak hold, moving average, alarms, output hold M3 CS1W-MAD44 1/64,000 0.05% of PV 5 ms/point Configurable alarms, maintenance M3 functions, user-defined scaling, zero/ span adjustment, square root, totaliser. CS1W-PDC11 1/16,000 0.3% of PV 62.5 ms/point Configurable alarms, zero/span adjust- M3 ment, square root CS1W-PDC55 B, E, J, K, L, N, R, S, T, 1/64,000 U, WRe5-26, PLII, -100 to 100 mV 0.05% of PV 5 ms/point Configurable alarms (absolute + rate-of-change), peak hold, maintenance functions M3 CS1W-PTS11 0.05% of PV 5 ms/point Configurable alarms (absolute + rate-of-change), peak hold, maintenance functions M3 CS1W-PTS12 0.1C 0.3% of PV 62.5 ms/point 4 configurable alarm outputs M3 CS1W-PTS51 0.1C 0.3% of PV 62.5 ms/point 4 configurable alarm outputs M3 CS1W-PTS52 0.1C 0.3% of PV 31.2 ms/point Configurable alarms per channel M3 CS1W-PTS55 Resistance thermometer input Pt100, JPt100 0.1C 0.3% of PV 31.2 ms/point Configurable alarms per channel M3 CS1W-PTS56 4 2-Wire transmitter input 1 to 4 to 5 V, 20 mA 1/4,096 0.2% of FS 25 ms/point Built-in power supply for transmitter, configurable alarms, square root, rate-of-change, etc. M3 CS1W-PTW01 8 Power transducer input -1 to 0 to 1 mA, 1 mA 1/4,096 0.2% of FS 25 ms/point Inrush current limiter, configurable alarms, averaging, etc. M3 CS1W-PTR01 8 Power transducer input -100 to 0 to 100 mV, 100 mV 1/4,096 0.2% of FS 25 ms/point Inrush current limiter, configurable alarms, averaging, etc. M3 CS1W-PTR02 4 Pulse rate input 25 ms/point Averaging, totaliser M3 CS1W-PPS01 -10 to 0 to 1 to 4 to 10 V, 5 V, 5 V, 20 mA B, J, K, L, R, S, T B, J, K, L, R,S, T 20000 pps, voltage, up to open collector, contact 1/32,000 - 33 CS-Series analogue and process I/O units Points Type 4 Isolated control output 1 to 4 to 4 Isolated control output -10 to 0 to -5 to 0 to -1 to 0 to *1 Resolution Accuracy*1 5 V, 20 mA 1/4,000 I: V: 10 V, 10 V, 5 V, 5 V, 1 V, 1V 1/4,000 Ranges Remarks Connection type Order code 0.1% of FS 0.2% of FS 25 ms/point Output readback, high/low/rate limiting, M3 disconnection alarm, zero/span adjustment CS1W-PMV01 0.1% of FS 10 ms/point High/low/rate limiting, output hold, zero/span adjustment CS1W-PMV02 M3 Accuracy for Voltage and Current Inputs/Outputs as percentage of full scale and typical value at 25C ambient temperature (Consult the operation manual for details) Accuracy for Temperature Inputs/Outputs as percentage of process value and typical value at 25C ambient temperature (Consult the operation manual for details) Note: All analogue I/O units are designated as special I/O units 34 Conversion time Rack PLC CS-Series position/motion control units Rack PLC Add motion control to any CS1 PLC Ordering information Channels/ Axes Type Signal type Unit class Remarks Connection type Order code 2 SSI inputs (absolute position data) Synchronous serial protocol Special I/O unit Baud rate, encoding type, data length, etc. can be set per channel 2 digital outputs, NPN/PNP selectable. M3 screw CS1W-CTS21 2 500 kHz Counter 24 V, 12V, line driver Special I/O unit 4 configurable digital inputs + 4 configurable digital outputs Target values trigger interrupt to CPU 1 x Fujitsu (40 pt) CS1W-CT021 2 x Fujitsu (40 pt) CS1W-CT041 4 1 Position control unit 24V open collector Special I/O unit 500 kpps pulse outputs, inputs for origin, limit switches, stop, interrupt 1 x Fujitsu (40 pt) CS1W-NC113 2 Position control unit 24V open collector Special I/O unit 500 kpps pulse outputs, inputs for origin, limit switches, stop, interrupt 1 x Fujitsu (40 pt) CS1W-NC213 4 Position control unit 24V open collector Special I/O unit 500 kpps pulse outputs, inputs for origin, limit switches, stop, interrupt 2 x Fujitsu (40 pt) CS1W-NC413 1 Position control unit Line driver Special I/O unit 500 kpps pulse outputs, inputs for origin, limit switches, stop, interrupt 1 x Fujitsu (40 pt) CS1W-NC133 2 Position control unit Line driver Special I/O unit 500 kpps pulse outputs, inputs for origin, limit switches, stop, interrupt 1 x Fujitsu (40 pt) CS1W-NC233 4 Position control unit Line driver Special I/O unit 500 kpps pulse outputs, inputs for origin, limit switches, stop, interrupt 2 x Fujitsu (40 pt) CS1W-NC433 2 Motion control unit Analogue Special I/O unit Closed loop with automatic trapezoid or S-curve acceleration/deceleration Snap-on connectors (3M) CS1W-MC221-V1 4 Motion control unit Analogue Special I/O unit Closed loop with automatic trapezoid or S-curve acceleration/deceleration Snap-on connectors (3M) CS1W-MC421-V1 Description Connection type Order code General purpose I/O terminal block (40xM3 screw) MIL (40 pt) XW2D-40G6 General purpose I/O connection cable for I/O units with 40-pt. Fujitsu connector ( _ _ _ = length in cm) Fujitsu (40 pt.) to MIL (40 pt.) XW2Z-_ _ _ B Servo relay unit 1-Axis position control unit - XW2B-20J6-1B Servo relay unit 2-Axes position control unit - XW2B-40J6-2B Cable connecting servo relay unit to Position control unit CS1W-NC113, cable length 1 m. For Accurax G5 servo drives. - XW2Z-100J-A6 Cable connecting servo relay unit to Position control unit CS1W-NC213/413, cable length 1 m. For Accurax G5 servo drives. - XW2Z-100J-A7 Cable connecting servo relay unit to Position control unit CS1W-NC113, cable length 1 m. For SmartStep 2 servo drives. - XW2Z-100J-A6 Cable connecting servo relay unit to Position control unit CS1W-NC213/413, cable length 1 m. For SmartStep 2 servo drives. - XW2Z-100J-A7 Cable connecting servo relay unit to Position control unit CS1W-NC133, cable length 1 m. For Accurax G5 servo drives. - XW2Z-100J-A10 Cable connecting servo relay unit to Position control unit CS1W-NC233/433, cable length 1 m. Accurax G5 servo drives. - XW2Z-100J-A11 Cable connecting servo relay unit to Position control unit CS1W-NC133, cable length 1 m. For SmartStep 2 servo drives. - XW2Z-100J-A10 Cable connecting servo relay unit to Position control unit CS1W-NC233/433, cable length 1 m. For SmartStep 2 servo drives. - XW2Z-100J-A11 Cable connecting servo relay unit to Accurax G5 servo drives, cable length 1 m. - XW2Z-100J-B25 Cable connecting servo relay unit to SmartStep 2 servo drive, cable length 1 m. - XW2Z-100J-B29 Accessories 35 1 * Counter units gather position information from SSI- or incremental encoders. Actual positions are compared with internally stored target values. * Position control units are used for point-to-point positioning with servo drives or stepper motors. Target data and acceleration/deceleration curves can be adjusted on-the-fly. * Position- and motion control units equipped with MECHATROLINK-II interface can control multiple drives through a single high-speed link. Message routing through multiple communication layers allows the attached drives to be configured from any point in the control network. PLC From simple position measurement to multi-axis synchronised motion control, CS1 offers a full range of units: CS-Series communication units Rack PLC Open to any communication, standard or user-defined CS1 provides both standardised open networks interfaces, and cost efficient, highspeed proprietary network links. Datalinks between PLCs, or to higher-level information systems can be made using Serial or Ethernet links, or the easy-to-use Controller Link network. Omron supports the 2 major field networks, DeviceNet and PROFIBUS-DP. For high-speed field I/O, Omron's own CompoBus/S offers an unsurpassed ease of installation. Fully user-configurable serial and CAN-based communication can be used to emulate a variety of application-specific protocols. EtherNet/IP units provide data link functions to share large amounts of data between PLCs. The PROFINETIO controller together with the SmartSlice modular I/O system offers ethernet-based I/O with controller- and network redundancy. Ordering information Type Ports Protocols Remarks Connection type Order code Serial 2 x RS-232C CompoWay/F, Host Link, NT link, Modbus, CPU bus unit User-defined Unit class - 9-pin D-Sub CS1W-SCU21-V1 Serial 2 x RS-232C/RS-485 CompoWay/F, Host Link, NT link, Modbus, CPU bus unit User-defined - 9-pin D-Sub CS1W-SCU31-V1 Serial 2 x RS-232C CompoWay/F, Host Link, NT link, Modbus, CPU option board User-defined - 9-pin D-Sub CS1W-SCB21-V1 Serial 1 x RS-232C + 1 x RS-422/RS-485 CompoWay/F, Host Link, NT link, Modbus, CPU option board User-defined - 9-pin D-Sub CS1W-SCB41-V1 GP-IB Master/Slave selectable GP-IB instrument communication Special I/O unit - GP-IB CS1W-GPI01 Ethernet 1 x 100 Base-Tx UDP, TCP/IP, FTP server, SMTP (e-mail), SNTP (time adjust), FINS routing, socket service CPU bus unit - RJ45 CS1W-ETN21 Controller link 2-wire twisted pair Omron proprietary CPU bus unit - 2-wire screw + GND CS1W-CLK21-V1 Optical HPCF - 2 x HPCF connector CS1W-CLK12-V1 Optical graded-index fiber - 4 x ST connector CS1W-CLK52-V1 EtherNet/IP 1 x 100 Base-Tx EtherNet/IP, UDP, TCP/IP, FTP server, SNTP, SNMP CPU Bus unit 31 mm RJ45 CS1W-EIP21 DeviceNet 1 x CAN DeviceNet CPU bus unit - 5-p detachable CS1W-DRM21-V1 CompoNet 4-wire, data + power to slaves CompoNet (CIP-based) (Master) Special I/O unit - 4-p detachable IDC or screw CS1W-CRM21 PROFIBUS-DP 1 x RS-485 (Master) DP, DPV1 CPU bus unit - 9-pin D-Sub CS1W-PRM21 CAN 1 x CAN CANopen, User-defined CPU bus unit - 5-p detachable CS1W-CORT21 PROFINET IO 1 x 100 Base-Tx PROFINET IO controller FINS UDP CPU bus unit - RJ45 CS1W-PNT21 PROFIBUS-DP 1 x RS-485 (Slave) DP C200H special I/O unit C200H units cannot be used on CS1D systems 9-pin D-Sub C200HW-PRT21 CompoBus/S 2-wire (Master) Omron proprietary C200H special I/O unit 2-wire screw + 2-wire power C200HW-SRM21-V1 Description Connection type Order code RS-232C to RS-422/RS-485 signal converter. Mounts directly on serial port. 9-pin D-sub to screw clamp CJ1W-CIF11 terminals Controller link PCI board with support software PCI, wired CLK 3G8F7-CLK21-EV1 Controller link PCI board with support software PCI, HPCF connectors 3G8F7-CLK12-EV1 Controller link PCI board with support software PCI, ST connectors 3G8F7-CLK52-EV1 Controller link repeater unit (wire to wire) Screw - Screw CS1W-RPT01 Controller link repeater unit (wire to HPCF fiber) Screw - HPCF connector CS1W-RPT02 Controller link repeater unit (wire to graded-index glass fiber) Screw - ST connector CS1W-RPT03 Accessories 36 WE70 Wireless communication FA Wireless LAN unit WE70 utilises spread-spectrum modulation technology based on radio waves to enable communication between devices in a limited area. This gives users the mobility to move around within a broad coverage area and still be connected to the network. The smart roaming function enables high speed roaming therefore moving equipment and mobile object can communicate at high speed. PLC Conforms to IEEE 802.11a/b/g. Same noise and environment resistance level as a PLC. Features Omron's original security system. Signals can be observed with LED indicators. Conforms to radio wave standards for the USA, Europe, and China. 1 * * * * * Ordering information Area Type Model Europe Access Point (Master) WE70-AP-EU Client (Slave) WE70-CL-EU Access Point (Master) WE70-AP-US Client (Slave) WE70-CL-US Access Point (Master) WE70-AP-CN Client (Slave) WE70-CL-CN Type Specifications Model Directional Magnetic-base Antenna 1 set with two Antennas, 2.4 GHz/5 GHz Dual-band compatible WE70-AT001H USA China Accessories Type Model DIN Rail Mounting Bracket (for TH35 7.5) WT30-FT001 DIN Rail Mounting Bracket (for TH35 15) WT30-FT002 Antenna Extension Cable (5 m) WE70-CA5M 37 Remote I/O THE SMARTEST MODULAR I/O SYSTEM SmartSlice - Intelligence point by point SmartSlice is the most advanced, yet easy-to-use remote I/O system currently available. Its built-in intelligence will help to reduce the effort you spend on engineering, troubleshooting and maintenance in your machine, line or plant. By keeping track of control performance and logging all operations, each module can provide timely warnings, preventing costly machine downtime. SmartSlice supports the open communication standards EtherCat, PROFINET-IO, PROFIBUS-DP, DeviceNet, CompoNet and MECHATROLINK-II. This provides you the flexibility to adapt to local requirements, anywhere in the world, without changing your I/O. * Reduce engineering time * Reduce machine downtime * Increase your efficiency The five most used smart features are demonstrated at: www.smartslice.info PROFIBUS-DP DeviceNet IP67 Compact 38 IP20 IP20 Compact Wireless Link I/O DRT2-_C_ WD30 WT30 DRT2 Page 47 Page 49 Page 49 Page 44 Modular Modular Remote I/O 2 Remote I/O PROFINET IO MECHATROLINK-II EtherCAT CompoNet CompoBus/S IP20 IP20 IP20 IP20 IP20 IP20 IP20 IP67 Modular Modular Modular Compact Modular Compact Compact Compact SmartSlice GX CRT1 SRT2 SRT2-_C_ Page 42 Page 43 Page 45 Page 46 Page 48 39 40 Remote I/O Selection table GRT GX Network connection DeviceNet open-style terminal block PROFIBUS-DP 9-pin D-sub CompoNet: 4-pin system connector PROFINET-IO: 2 x RJ45 MECHATROLINK-II: 2 x ML-II EtherCAT: 2 x RJ45 I/0 types 2/4/8-point digital I/O 2-point analogue I/O 2-point temperature input Counter units Power feed units Expansion units I/0 Connection technology Push-in screwless clamp CRT1 SRT2 EtherCAT in- and outgoing connections by RJ45 ethernet plug DeviceNet with open-style push-in terminal block Unshielded 4-wire flat cable and IDC connectors, or general-purpose 2-wire cable by screw terminals. CompoBus/S, (2-wire + power) by M3 screw terminals 8 DI + 8 DO 16 DI+extension 16 DO+extension 16 relay out 4 AI (V/I) 2 AO (V/I) Incremental Encoder (24 V/line driver) 8/16 DI+extension, 8/16 DO+extenstion, 8 DI + 8 DO 16 relay out, 4 AI (V/I, TC, Pt100), 2 AO (V/I), 8/16 DI+extension, 8/16 DO+extenstion, 8 DI + 8 DO 4 AI, 2 AO, 2 DI, 2 DO. 4/8/16 DI, 4/8/16 DO, 8/16 relay out, 4 AI (V/I) 2 AO (V/I) M3 screw terminals (1- or 3-wire DI) M3 screw terminals (1 or 3-wire DI) M3 screw terminals M3 screw terminals (1 or 3-wire DI) I/O and power supply diagnostics. Operation timers and counters per I/O point. Analogue value calculations and alarms. I/O and power supply diagnos- I/O isolation, status indication tics. Operation timers and counters for each I/O point. Analogue value calculations and alarms. IP20 (DIN rail mounting in cabinets) IP20 (DIN rail mounting in cabinets) IP20 (DIN rail mounting in cabinets) IP20 (DIN rail mounting in cabinets) 43 44 45 46 Smart features I/O and power supply diagnos- automatic or fixed address tics. Operation timers and allocation counters per I/O point. Analogue value calculations and alarms. Ingress Protection class IP20 (DIN rail mounting in cabinets) Page 42 DRT2 Field I/0 Model DRT2-_C_ Network connection DeviceNet with M12 micro connector I/0 types 8/16 DI, 8/16 DO, 8DI + 8 DO I/0 Connection technology M12, 1 or 2 I/O signals per connector. 7/8" I/O Power connector. Wireless I/O SRT2-_C_ Size in mm (HxWxD) 175x60x27.3 Page 47 WD30/WT30 CompoBus/S, by 4-wire M12 connector, unshielded DeviceNet M12 connection RS-232C by 9-pin D-sub 4/8 DI, 4/8 DO Wireless link, 16 DI, 8DI + 8DO M12 connectors, one I/O point per connector Push-in screwless clamp Smart features I/O and power supply diagnos- I/O isolation, status indication tics. Operation timers and counters per I/O point. Ingress Protection class IP67, flat mounting by two M5 screws 2 Model Compact I/O Remote I/0 Modular I/O Wireless link diagnostics Explicit message communication IP67, flat mounting by three M5 screws IP20 (cabinet mounting). Separate antennas (IP67) can be mounted outside the cabinet 114/160x54x29.5 WD30: 80x95x35 WT30: 105x90x40 48 49 41 SmartSlice I/O system Remote I/O The smartest modular I/O system Omron's SmartSlice I/O system is compact, intelligent and easy. When used with Omron's CS1/CJ1 DeviceNet master units it is plug-and-work, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analogue I/O units, PLC programming can be minimised. Preventive maintenance data can be accessed using CX-Integrator software, standard PLC function blocks or NS-series Smart Active Parts. * * * * * Most compact in the market (84 mm high) Easy set-up, backup and restore functions Diagnostics and preventive maintenance data at I/O level Detachable terminal blocks allow hot-swapping without re-wiring 3-wire connection with 'push-in' technology, no screwdriver required for installation Ordering information Model Function Specifications Size in mm (HxWxD) Order code Interface units DeviceNet interface unit For up to 64 I/O units 84x58x70 GRT1-DRT CompoNet interface unit For up to 64 I/O units (limited to 32 byte in + 32 byte out) 84x58x70 GRT1-CRT PROFIBUS-DP interface unit For up to 64 I/O units 84x58x70 GRT1-PRT PROFINET-IO interface unit For up to 64 I/O units 84x58x70 GRT1-PNT MECHATROLINK-II interface unit For up to 64 I/O units (slave to Trajexia motion controller) 84x58x70 GRT1-ML2 EtherCAT interface unit For up to 64 I/O units (slave to Trajexia motion controller) 84x58x70 GRT1-ECT End plate One unit required per bus interface 84x20x58 GRT1-END End plate with memory function Supports toolless replacement of PROFINET-IO interface unit 84x20x58 GRT1-END-M 4 NPN inputs 24 VDC, 6 mA, 3-wire connection 84x15x74 GRT1-ID4 4 PNP inputs 24 VDC, 6 mA, 3-wire connection 84x15x74 GRT1-ID4-1 8 NPN inputs 24 VDC, 4 mA, 1-wire connection + 4xG 84x15x74 GRT1-ID8 8 PNP inputs 24 VDC, 4 mA, 1-wire connection + 4xV 84x15x74 GRT1-ID8-1 4 AC inputs 110 VAC, 2-wire connection 84x15x74 GRT1-IA4-1 4 AC inputs 230 VAC, 2-wire connection 84x15x74 GRT1-IA4-2 4 NPN outputs 24 VDC, 500 mA, 2-wire connection 84x15x74 GRT1-OD4 4 PNP outputs 24 VDC, 500 mA, 2-wire connection 84x15x74 GRT1-OD4-1 4 PNP outputs with short-circuit protection 24 VDC, 500 mA, 3-wire connection 84x15x74 GRT1-OD4G-1 4 PNP outputs with short-circuit protection 24 VDC, 2 A, 2-wire connection 84x15x74 GRT1-OD4G-3 8 NPN outputs 24 VDC, 500 mA, 1-wire connection + 4xV 84x15x74 GRT1-OD8 8 PNP outputs 24 VDC, 500 mA, 1-wire connection + 4xG 84x15x74 GRT1-OD8-1 8 PNP outputs with short-circuit protection 24 VDC, 500 mA, 1-wire connection + 4xG 84x15x74 GRT1-OD8G-1 2 relay outputs 240 VAC, 2A, normally-open contacts 84x15x74 GRT1-ROS2 60 kHz Counter unit, NPN A+B encoder inputs + 1 Z/control input + 1 output (NPN-type) 84x15x74 GRT1-CT1 60 kHz Counter unit, PNP A+B encoder inputs + 1 Z/control input + 1 output (PNP-type) 84x15x74 GRT1-CT1-1 100 kHz Counter / Positioner unit A+B+Z encoder inputs (line driver or 24 V selectable) + 1 control input + 2 outputs (PNP-type) 84x15x74 GRT1-CP1-L 2 analogue inputs, current/voltage 10 V, 0-10 V, 0-5 V, 1-5 V, 0-20 mA, 4-20 mA 84x15x74 GRT1-AD2 2 analogue outputs, voltage 10 V, 0-10 V, 0-5 V, 1-5 V 84x15x74 GRT1-DA2V 2 analogue outputs, current 0-20 mA, 4-20 mA 84x15x74 GRT1-DA2C 2 Pt100 inputs Pt100, 2-wire or 3-wire connection 84x15x74 GRT1-TS2P 2 Pt1000 inputs Pt1000, 2-wire or 3-wire connection 84x15x74 GRT1-TS2PK 2 Thermocouple inputs Types B, E, J, K, N, R, S, T, U, W, PL2, with cold junction compensation 84x15x74 GRT1-TS2T I/O units Model Description Size in mm (HxWxD) Order code Other units I/O power feed unit, separates power supply between groups of I/O units 84x15x74 GRT1-PD2 I/O power feed unit with electronic overload protection, separates power supply between groups of I/O units 84x15x74 GRT1-PD2G I/O power feed and distribution unit, separates power supply between groups of I/O units, 8xV + 4xG 84x15x74 GRT1-PD8 I/O power feed and distribution unit, separates power supply between groups of I/O units, 4xV + 8xG 84x15x74 GRT1-PD8-1 I/O power connection unit, 8xV + 4xG 84x15x74 GRT1-PC8 I/O power connection unit, 4xV + 8xG 84x15x74 GRT1-PC8-1 Turnback unit, right-hand side 84x20x58 GRT1-TBR Turnback unit, left-hand side 84x58x70 GRT1-TBL Turnback cable, one meter 1m GCN2-100 Accessories Description Order code Replacement front connectors, pack of 5 pcs. GRT1-BT1-5 PROFIBUS-DP connector, 9-pin D-sub PROFIBUS Connector 839550 PROFIBUS-DP connector, 9-pin D-sub, with bus termination PROFIBUS Term. Conn. 846086 PROFINET RJ45 connector IE-PS-RJ45-FH-BK CompoNet connectors See page 45 42 Compact I/O GX-series Remote I/O EtherCAT is an extremely fast industrial automation network, which uses standard ethernet cabling. It makes very efficient use of the standard Ethernet transmission frame, with each node accessing the entire frame on the fly. This reduces the delay in each slave to microsecond level. Its deterministic nature makes EtherCAT extremely suitable for motion control. Omron provides PLC-based as well as stand-alone motion control solutions based on EtherCAT. Remote I/O When speed counts: EtherCAT I/O 2 The GX-series I/O units provide the basic in- and outputs for such systems, including high-speed encoder inputs which can feed position information into the controller. Ordering information Unit Type Specification Size in mm (HxWxD) Remarks Order code 16-point NPN input unit 24 VDC, 6 mA per point 52 x 135 x 57 Expandable with one XWT unit GX-ID1611 16-point NPN input unit 24 VDC, 6 mA per point 52 x 200 x 69 3-tier connection for direct sensor wiring GX-ID1612 16-point PNP input unit 24 VDC, 6 mA per point 52 x 135 x 57 Expandable with one XWT unit GX-ID1621 16-point PNP input unit 24 VDC, 6 mA per point 52 x 200 x 69 3-tier connection for direct sensor wiring GX-ID1622 16-point relay output unit 2 A per point, max. 8 A per common 52 x 160 x 58 with easy-to-replace relays, expandable with one XWT unit GX-OC1601 16-point NPN output unit 24 VDC, 0.5 A per point 52 x 135 x 57 Expandable with one XWT unit GX-OD1611 16-point NPN output unit 24 VDC, 0.5 A per point 52 x 200 x 69 3-tier connection for direct sensor wiring GX-OD1612 16-point PNP output unit 24 VDC, 0.5 A per point 52 x 135 x 57 Expandable with one XWT unit GX-OD1621 16-point PNP output unit 24 VDC, 0.5 A per point 52 x 200 x 69 3-tier connection for direct sensor wiring GX-OD1622 8-point input + 8-point output unit (NPN) 24 VDC, input 6 mA, output 0.5 A per point 52 x 135 x 57 - GX-MD1611 8-point input + 8-point output unit (NPN) 24 VDC, input 6 mA, output 0.5 A per point 52 x 200 x 69 3-tier connection for direct sensor wiring GX-MD1612 8-point input + 8-point output unit (PNP) 24 VDC, input 6 mA, output 0.5 A per point 52 x 135 x 57 - GX-MD1621 8-point input + 8-point output unit (PNP) 24 VDC, input 6 mA, output 0.5 A per point 52 x 200 x 69 3-tier connection for direct sensor wiring GX-MD1622 4-Channel analogue input unit 1 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 4 to 20 mA, 52 x 135 x 57 Resolution 1/6000, conversion time 4 ms (4 inputs) GX-AD0471 2-Channel analogue output unit 1 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 4 to 20 mA, 52 x 135 x 57 Resolution 1/6000, conversion time 2 ms (2 outputs) GX-DA0271 1-Channel incremental encoder input (24V) Oper collector, up to 125 kHz 52 x 215 x 69 A, B, Z, 2 x Latch, Reset inputs GX-EC0211 1-Channel incremental encoder input (line RS422 signal level, up to 1 MHz driver) 52 x 215 x 69 A, B, Z, 2 x Latch, Reset inputs GX-EC0241 Expansion units Unit Type Specification Size in mm (HxWxD) Remarks Order code 8-point PNP input expansion unit 24 VDC, 6 mA per point 50x66x50 Expansion unit for GX, DRT2 and CRT1 series XWT-ID08-1 16-point PNP input expansion unit 24 VDC, 6 mA per point 50x94x50 Expansion unit for GX, DRT2 and CRT1 series XWT-ID16-1 8-point PNP output expansion unit 24 VDC, 0.5 A per point 50x66x50 Expansion unit for GX, DRT2 and CRT1 series XWT-OD08-1 16-point PNP output expansion unit 24 VDC, 0.5 A per point 50x94x50 Expansion unit for GX, DRT2 and CRT1 series XWT-OD16-1 Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code. 43 Compact I/O DRT2 Remote I/O Smart DeviceNet I/O Compact DeviceNet I/O units with extensive diagnostic functions. Data regarding power supply status, I/O response times, operation counters and on-time are continuously recorded and checked against user-defined limits. Any deviation is reported to the control system, as indication to perform machine maintenance and prevent unplanned downtime. Smart DeviceNet I/Os are supported by PLC Function Blocks and HMI Smart Active Parts, allowing program-less visualisation and monitoring from the CJ1 PLCs and NS operator terminals. * * * * * Compact size IP20 housing Expandable digital I/Os Built-in diagnostics and preventive maintenance functions Detachable I/O terminal blocks Analogue I/O with data pre-processing and alarm functions Ordering information Unit type Specifications Size in mm (HxWxD) Remarks Order code 8-point PNP input unit 24 VDC, 6 mA per point 50x115x50 - DRT2-ID08-1 16-point PNP input unit 24 VDC, 6 mA per point 50x115x50 Expandable with one XWT unit DRT2-ID16-1 16-point PNP input unit 24 VDC, 6 mA per point 50x180x58 3-tier connection for direct sensor wiring DRT2-ID16TA-1 8-point PNP output unit 24 VDC, 0.5 A per point 50x115x50 - DRT2-OD08-1 16-point PNP output unit 24 VDC, 0.5 A per point 50x115x50 Expandable with one XWT unit DRT2-OD16-1 16-point PNP output unit 24 VDC, 0.5 A per point 50x180x58 3-tier connection for direct actuator wiring DRT2-OD16TA-1 16-point relay output unit 2 A per point, max. 8 A per common 50x125x52 with easy-to-replace relays, expandable with one XWT unit DRT2-ROS16 8-point input + 8-point output unit (PNP) 24 VDC, input 6 mA, output 0.5 A per point 50x115x50 - DRT2-MD16-1 8-point input + 8-point output unit (PNP) 24 VDC, input 6 mA, output 0.5 A per point 50x180x58 3-tier connection for direct sensor/actuator wiring DRT2-MD16TA-1 4-Channel analogue input unit 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA 50x115x50 Resolution 1/6000, conversion time 4 ms (4 inputs) DRT2-AD04 4-Channel analogue input unit 1 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA 50x115x50 Resolution 1/30000, conversion time 250 ms (4 inputs) DRT2-AD04H 2-Channel analogue output unit 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA 50x115x50 Resolution 1/6000, conversion time 2 ms (2 outputs) DRT2-DA02 4-Channel temperature input unit Platinum Resistance Thermometer types Pt100, JPt100 50x115x50 0.3% accuracy, conversion time 250 ms (4 inputs) DRT2-TS04P 4-Channel temperature input unit Thermocouple types R, S, K, J, T, B, L, E, U, N, W, and PL2 50x115x50 0.3% accuracy, conversion time 250 ms (4 inputs) DRT2-TS04T Unit type Specifications Size in mm (HxWxD) Remarks Order code 8-point PNP input expansion unit 24 VDC, 6 mA per point 50x66x50 Expansion unit for GX, DRT2 and CRT1 series XWT-ID08-1 16-point PNP input expansion unit 24 VDC, 6 mA per point 50x94x50 Expansion unit for GX, DRT2 and CRT1 series XWT-ID16-1 8-point PNP output expansion unit 24 VDC, 0.5 A per point 50x66x50 Expansion unit for GX, DRT2 and CRT1 series XWT-OD08-1 16-point PNP output expansion unit 24 VDC, 0.5 A per point 50x94x50 Expansion unit for GX, DRT2 and CRT1 series XWT-OD16-1 Expansion units Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code. Accessories Type Order code Power supply tap with 2 fuses, 2 bus connectors and termination resistor DCN1-1P T-branch tap with 3 bus connectors (screw clamp) and terminating resistor DCN1-1C T-branch tap with 3 bus connectors (screwless) DCN1-1NC T-branch tap with 5 bus connectors (screw clamp) and terminating resistor DCN1-3C T-branch tap with 5 bus connectors (screwless) DCN1-3NC Terminating resistor with screw terminals DRS1-T 44 Compact I/O CRT1 Remote I/O Combining the smart features of DRT2 DeviceNet I/O and the speed and ease of use of CompoBus/S, CompoNet is ideal for high-speed machine control with a flexible and expandable architecture. The special flat cable and IDC connectors make installation quick and easy. The use of repeaters allows wide-area networks with free topology, ideal for conveyor- and warehouse automation. Compact size IP20 housing Expandable digital I/Os with detachable terminal blocks Easy network wiring with IDC connections Built-in diagnostics and preventive maintenance functions Analogue I/O with data pre-processing and alarm functions 2 * * * * * Remote I/O Smart CompoNet I/O Ordering information Unit type Specifications Size in mm (HxWxD) Remarks Order code 4-point PNP input unit 24 VDC, 6 mA per point 24x80x20 Screwless I/O connector, power supply via CompoNet cable CRT1B-ID04SL-1-300 8-point PNP input unit 24 VDC, 6 mA per point 50x115x57.6 Screw terminals, common power terminals per 8 points CRT1-ID08-1 8-point PNP input unit 24 VDC, 6 mA per point 50x96x60 3 push-in terminals per I/O point (signal + power) CRT1-ID08SL-1 16-point PNP input unit 24 VDC, 6 mA per point 50x115x50 Expandable with one XWT unit. CRT1-ID16-1 16-point PNP input unit 24 VDC, 6 mA per point 52x180x69 3 terminals per I/O point (for power distribution) CRT1-ID16TA-1 4-point PNP output unit 24 VDC, 0.2 A per point 24x80x20 Screwless I/O connector, power supply via CompoNet cable CRT1B-OD04SL-1-300 8-point PNP output unit 24 VDC, 0.5 A per point 50x115x57.6 Screw terminals, common power terminals per 8 points CRT1-OD08-1 8-point PNP output unit 24 VDC, 0.5 A per point 50x96x60 3 push-in terminals per I/O point (signal + power) CRT1-OD08SL-1 16-point PNP output unit 24 VDC, 0.5 A per point 50x115x50 Expandable with one XWT unit. CRT1-OD16-1 16-point PNP output unit 24 VDC, 0.5 A per point 52x180x69 3 terminals per I/O point (for power distribution) CRT1-OD16TA-1 8-point SSR output unit 265 V AC, 0.3 A per point 50x95x57.6 Screw terminals, common power terminals per 8 points CRT1-ROF08 8-point relay output unit 250 VAC, 2 A per point, 8 A per common 50x95x57.6 Screw terminals, common power terminals per 8 points CRT1-ROS08 16-point relay output unit 250 VAC, 2 A per point, 8 A per common 50x140x57.6 8 outputs per common CRT1-ROS16 2-point input + 2-point output unit, PNP 24 VDC, 0.1 A per point 24x80x20 Screwless I/O connector, power supply via CompoNet cable CRT1-MD04SL-1-300 8-point input + 8-point output unit, PNP 24 VDC, 0.5 A per point 50x115x57.6 Screw terminals, common power terminals CRT1-MD16-1 8-point input + 8-point output unit, PNP 24 VDC, 0.5 A per point 50x170x60 3 push-in terminals per I/O point (signal + power) CRT1-MD16SL-1 8-point input + 8-point output unit PNP 24 VDC, 0.5 A per point 52x180x69 3 terminals per I/O point (for power distribution) CRT1-MD16TA-1 4-Channel analogue input unit 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA 50x115x50 Resolution 1/6000, conversion time 4 ms (4 inputs) CRT1-AD04 2-Channel analogue output unit 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA 50x115x50 Resolution 1/6000, conversion time 2 ms (2 outputs) CRT1-DA02 4-Channel Temperature input unit Platinum Resistance Thermometer type Pt100 50x115x50 0.3% accuracy, conversion time 250 ms (4 inputs) CRT1-TS04P 4-Channel Temperature input unit Thermocouple types R, S, K, J, T, B, L, E, U, 50x115x50 N, W and PL2 0.3% accuracy, conversion time 250 ms (4 inputs) CRT1-TS04T Unit type Specifications Size in mm (HxWxD) Remarks Order code 8-point PNP input expansion unit 24 VDC, 6 mA per point 50x66x50 Expansion unit for GX, DRT2 and CRT1 series XWT-ID08-1 16-point PNP input expansion unit 24 VDC, 6 mA per point 50x94x50 Expansion unit for GX, DRT2 and CRT1 series XWT-ID16-1 8-point PNP output expansion unit 24 VDC, 0.5 A per point 50x66x50 Expansion unit for GX, DRT2 and CRT1 series XWT-OD08-1 16-point PNP output expansion unit 24 VDC, 0.5 A per point 50x94x50 Expansion unit for GX, DRT2 and CRT1 series XWT-OD16-1 Expansion units Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code. Accessories Unit type Specifications Size in mm (HxWxD) Remarks Order code CompoNet Repeater unit 1 upstream port + 1 downstream port 50x95x43 For extending CompoNet trunk lines, or creating branch lines CRS1-RPT01 CompoNet 4-wire flat cable For IP20 use 100 m For power supply + communication, use with DCN4-connectors DCA4-4F10 CompoNet Branch connector for trunk line For IP20 use - To create a branching point on a trunk line DCN4-TR4 CompoNet Branch line end connector For IP20 use - To connect a branch line to a trunk line DCN4-BR4 CompoNet Y-connector For IP20 use - To connect two line connectors to one slave unit DCN4-MD4 CompoNet Screw terminal connector For IP20 use - To provide conventional screw terminals for masters or slaves DCN4-TB4 CompoNet Terminator For IP20 use - Plugs in to DCN4-MD4 or DCN4-TR4 DCN4-TM4 CompoNet connector tool For DCN4-connectors - To attach DCN4-connectors to DCA4-4F10 flat cable DWT-A01 CompoNet Screw terminal connector For IP20 use, box of 10 pcs - To provide conventional screw terminals for 4-point bit slaves HCN-TB4LMZG-B10+ Bit slave flat cable plug For CRT1B-_D04SL-1-300 slaves - Allows mounting bit slaves directly on flat cable DCN4-MR4 Bit slave mounting plate For CRT1B-_D04SL-1-300 slaves - Mount with two screws, bit slave clips in place CRT1-ATT03 45 Compact I/O SRT2 Remote I/O Fast and easy over CompoBus/S Omron's unique CompoBus/S is the original I/O bus for machine automation. With free topology and up to 500 m bus length in long-distance mode, it can be used as a remote I/O system. In high-speed mode (100 m max.) the guaranteed submillisecond cycle time makes it ideal for efficient machine control. Used with the compact CPM2C-S PLC as master, your machine control system will fit in the smallest spaces. * * * * * Compact size in IP20 housing Fast cycle time; less than 1 ms per 256 I/O points Easy set-up; no software required Choice of 4- 8- and 16-point Digital I/O; transistor-, and relay models Analogue In/Outputs and customisable modules available Ordering information Unit type Specifications Size in mm (HxWxD) Remarks Order code 4-point PNP input unit 24 VDC, 6 mA per point 48x80x50 Compact IP20 I/O SRT2-ID04-1 8-point PNP input unit 24 VDC, 6 mA per point 48x80x50 Compact IP20 I/O SRT2-ID08-1 16-point PNP input unit 24 VDC, 6 mA per point 48x105x50 Compact IP20 I/O SRT2-ID16-1 16-point PNP input unit 24 VDC, 6 mA per point 50x180x59 3-tier connection for direct sensor wiring SRT2-ID16T-1 4-point PNP output unit 24 VDC, 0.3 A per point 48x80x50 Compact IP20 I/O SRT2-OD04-1 8-point PNP output unit 24 VDC, 0.3 A per point 48x80x50 Compact IP20 I/O SRT2-OD08-1 16-point PNP output unit 24 VDC, 0.3 A per point 48x105x50 Compact IP20 I/O SRT2-OD16-1 16-point PNP output unit 24 VDC, 0.5 A per point 50x180x59 3-tier connection for direct sensor/actuator wiring SRT2-OD16T-1 8-point input + 8-point output unit (PNP) 24 VDC, input 6 mA, output 0.3 A per point 50x180x59 3-tier connection for direct actuator wiring SRT2-MD16T-1 8-point relay output unit Max. 3 A per point 50x100x50 with easy-to-replace relays SRT2-ROC08 16-point relay output unit Max. 3 A per point 50x155x50 with easy-to-replace relays SRT2-ROC16 4-Channel analogue input unit 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA 48x105x50 Resolution 1/6000, conversion time 4 ms (4 inputs) SRT2-AD04 2-Channel analogue output unit 0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA 48x105x50 Resolution 1/6000, conversion time 2 ms (2 outputs) SRT2-DA02 Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code. Accessories Type Order code CompoBus/S 4-wire flatcable for power and communication (100 m) SCA1-4F10 CompoBus/S branch connector (IDC) for flatcable SCN1-TH4 CompoBus/S termination connector (IDC) for flatcable SCN1-TH4T CompoBus/S termination block (screw connection) SRS1-T 46 Field I/O DRT2 Remote I/O * IP67 protection, DRT2 versions are also oil- and welding-spatter proof * Internal circuits powered by DeviceNet; fewer connections means less installation errors * Smart Slave functions for diagnostics and preventive maintenance * Indication of broken wire and short-circuit in I/O signals * M12 connectors for fast installation Ordering information Unit type Specifications Size in mm Remarks (HxWxD) Order code 4-point PNP input unit 24 V, 6 mA 123x60x44 Separate I/O power supply connection DRT2-ID04CL-1 8-point PNP input unit 24 V, 6 mA 175x60x44 Separate I/O power supply connection DRT2-ID08CL-1 8-point PNP input unit 24 V, 11 mA, with power short-circuit and sensor disconnection detection 175x60x38 Unit power supply via DeviceNet cable DRT2-ID08C-1 16-point PNP input unit 24 V, 6 mA, 2 inputs per M12 connector 175x60x44 Separate I/O power supply connection DRT2-HD16CL-1 16-point PNP input unit 24 V, 11 mA, 2 inputs per M12 connector, with power short-circuit and sensor disconnection detection 175x60x38 Unit power supply via DeviceNet cable DRT2-HD16C-1 4-point PNP output unit 24 V, 0.5 A per point 123x60x44 Separate I/O power supply connection DRT2-OD04CL-1 8-point PNP output unit 24 V, 0.5 A per point 175x60x44 Separate I/O power supply connection DRT2-OD08CL-1 8-point PNP output unit 24 V, 1.5 A per point (8 A total), with short-circuit protection + indication 175x60x44 Separate I/O power supply connection DRT2-OD08C-1 16-point PNP output unit 24 V, 0.5 A per point, 2 points per M12 connector 175x60x44 Separate I/O power supply connection DRT2-WD16CL-1 8-point input + 8-point PNP output unit 24 V, 6 mA input, 0.5 A output per point, 2 points per M12 connector 175x60x44 Separate I/O power supply connection DRT2-MD16CL-1 Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code. Accessories Unit type Specifications Order code DeviceNet thin cable with one M12 socket connector (female), 1 m DCA1-5CN01F1 DeviceNet thin cable with one M12 socket connector (female), 2 m DCA1-5CN02F1 DeviceNet thin cable with one M12 socket connector (female), 5 m DCA1-5CN05F1 DeviceNet thin cable with one M12 socket connector (female) and one M12 plug connector (male), 1 m DCA1-5CN01W1 DeviceNet thin cable with one M12 socket connector (female) and one M12 plug connector (male), 2 m DCA1-5CN02W1 DeviceNet thin cable with one M12 socket connector (female) and one M12 plug connector (male), 5 m DCA1-5CN05W1 DeviceNet T-connector for thin cable with two M12 socket connectors (female) + one M12 plug connector (male) DCN2-1 DeviceNet terminator with M12 plug connector DRS2-1 Power supply cable with one 7/8 inches socket connector (female), 2 m XS4F-D421-102-A Power supply cable with one 7/8 inches socket connector (female), 5 m XS4F-D421-105-A Power supply cable with one 7/8 inches socket connector (female) and one 7/8 inches plug connector (male), 2 m XS4W-D421-102-A Power supply cable with one 7/8 inches socket connector (female) and one 7/8 inches plug connector (male), 5 m XS4W-D421-105-A Power supply T-connector with two 7/8 inches socket connectors (female) + one 7/8 inches plug connector (male) XS4R-D424-5 4-wire I/O connection cable with one M12 plug connector (male), 1 m XS2H-D421-C80-A 4-wire I/O connection cable with one M12 plug connector (male), 2 m XS2H-D421-D80-A 4-wire I/O connection cable with one M12 plug connector (male), 5 m XS2H-D421-G80-A 4-wire I/O connection cable with one M12 socket connector (female) and one M12 plug connector (male), 1 m XS2W-D421-C81-A 4-wire I/O connection cable with one M12 socket connector (female) and one M12 plug connector (male), 2 m XS2W-D421-D81-A 4-wire I/O connection cable with one M12 socket connector (female) and one M12 plug connector (male), 5 m XS2W-D421-G81-A Y-connector for 16-point I/O units Splits the 2 I/O points per M12 connector to two M12 connectors XS2R-D426-1 Y-connector cable for 16-point I/O units Splits the 2 I/O points per M12 connector to two M12 connectors, 1 m XS2R-D426-C11-F M12 connector M12 plug connector (male), solder type XS2G-D421 M12 connector M12 socket connector (female), solder type XS2C-D421 IP67 cap for M12 sockets Metal cap for unused I/O connections XS2Z-12 47 2 Rugged I/O units for field mounting. The DRT2 slave units feature internal diagnostic and maintenance data collection, which can be accessed over the network. Power supply status, I/O response times, operation counters and on-time monitor data is available at all times, and is internally checked against user-defined limits. Maintenance warnings will be generated when limits are exceeded. Using CX-One or NSseries HMI with Smart Active Parts for visualisation, this allows more efficient system setup, commissioning and troubleshooting without any additional programming. Remote I/O DeviceNet I/O for harsh environments Field I/O SRT2 Remote I/O Dust- and waterproof CompoBus I/O Rugged I/O units for field mounting. Omron's unique CompoBus/S is the most efficient I/O bus for machine automation. With free topology and up to 500 m bus length in long-distance mode, it can be used as a remote I/O system. In high-speed mode (100 m max.) the guaranteed sub-millisecond cycle time makes it ideal for efficient machine control. With IP67 slave modules distributed throughout the machine, the need for protective enclosures is minimised. * * * * * IP67 protection against dust and water Fast cycle time; less than 1 ms for 256 I/O points Easy setup; no software required Choice of 4- and 8-point Digital I/O M12 connectors for easy field wiring Ordering information Unit type Specifications Size in mm (HxWxD) Order code 4-point PNP input unit 24 V, 6 mA 114x54x45 SRT2-ID04CL-1 8-point PNP input unit 24 V, 6 mA 114x54x45 SRT2-ID08CL-1 4-point PNP output unit 24 V, 0.5 A per point 114x54x45 SRT2-OD04CL-1 8-point PNP output unit 24 V, 0.5 A per point 114x54x45 SRT2-OD08CL-1 Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code. Accessories Unit type Specifications Remarks Order code CompoBus/S terminator with M12 plug connector - SRS2-1 M12 connector M12 plug connector (male), screw type For CompoBus/S 4-wire round cable XS2G-D4S7 M12 connector M12 socket connector (female), screw type For CompoBus/S 4-wire round cable XS2C-D4S7 M12 T-connector (4-wire) with two M12 socket connectors (female) + one M12 plug connector (male) - XS2R-D427-5 4-wire I/O connection cable with one M12 plug connector (male), 1 m - XS2H-D421-C80-A 4-wire I/O connection cable with one M12 plug connector (male), 2 m - XS2H-D421-D80-A 4-wire I/O connection cable with one M12 plug connector (male), 5 m - XS2H-D421-G80-A 4-wire I/O connection cable with one M12 socket connector (female) and one M12 plug connector (male), 1 m - XS2W-D421-C81-A 4-wire I/O connection cable with one M12 socket connector (female) and one M12 plug connector (male), 2 m - XS2W-D421-D81-A 4-wire I/O connection cable with one M12 socket connector (female) and one M12 plug connector (male), 5 m - XS2W-D421-G81-A Y-connector for 16-point I/O units Splits the 2 I/O points per M12 connector to two M12 connectors - XS2R-D426-1 Y-connector cable for 16-point I/O units Splits the 2 I/O points per M12 connector to two M12 connectors, 1 m - XS2R-D426-C11-F M12 connector M12 plug connector (male), solder type - XS2G-D421 M12 connector M12 socket connector (female), solder type - XS2C-D421 IP67 cap for M12 sockets Metal cap for unused I/O connections - XS2Z-12 48 WD30/WT30 Wireless I/O There are applications where a normal wired connection is not practical, impossible to maintain or prone to disturbance. WD30 provides a wireless master/slave data link for up to 63 DeviceNet sub-networks. Alternatively, a WD30 master unit can directly control WT30 wireless I/O slave units. For direct access to wireless remote I/O without passing through DeviceNet, the WT30 master is equipped with a serial CompoWay/F interface. 2 * Easy to set-up: Extensive diagnostic features such as signal strength measurement and channel usage * Each Wireless Master handles up to 100/100 words, input/output data. Up to 63 Wireless Slaves per Wireless Master * Uses spread spectrum technology for superior noise resistance in manufacturing environments * Relay function for extension of communication range (3 repeaters max.) * Explicit message communication Ordering information Unit type Size in mm (HxWxD) Order code Wireless Master unit; slave on DeviceNet network; with 2 pencil antennas 80x159x35 WD30-ME Wireless Master unit; slave on DeviceNet network; with 2 magnetic base antennas 80x95x35 WD30-ME01 Wireless Slave unit; Master on DeviceNet network; with 2 pencil antennas 80x159x35 WD30-SE Wireless Slave unit; Master on DeviceNet network; with 2 magnetic base antennas 80x95x35 WD30-SE01 Wireless Master unit; controlled by serial RS232-C link (antenna not included) 105x90x40 WT30-M01-FLK Wireless Slave unit; 16 digital inputs (NPN/PNP) 105x90x40 WT30-SID16 Wireless slave unit; 8 digital inputs + 8 digital outputs (PNP) 105x90x40 WT30-SMD16-1 Accessories Unit type Remarks Size Order code Magnet base antennas (set of 2), with 2 m cable - 115x36 WT30-AT001 Pencil antennas (set of 2) - 75 WT30-AT003 DIN-rail mounting bracket for WT30 - - WT30-FT001 DeviceNet thin cable with one M12 socket connector (female) 1m DCA1-5CN01F1 DeviceNet thin cable with one M12 socket connector (female) 2m DCA1-5CN02F1 DeviceNet thin cable with one M12 socket connector (female) 5m DCA1-5CN05F1 DeviceNet thin cable with one M12 socket connector (female) and one M12 plug connector (male) 1m DCA1-5CN01W1 DeviceNet thin cable with one M12 socket connector (female) and one M12 plug connector (male) 2m DCA1-5CN02W1 DeviceNet thin cable with one M12 socket connector (female) and one M12 plug connector (male) 5m DCA1-5CN05W1 DeviceNet T-connector for thin cable with two M12 socket connectors (female) + one M12 plug connector (male) - DCN2-1 DeviceNet terminator with M12 plug connector - DRS2-1 Remote I/O Wireless DeviceNet communication 49 Human machine interfaces (HMI) NQ HMI SERIES - Create and Operate Powerful, colour HMI in a compact format The NQ series, Omron's family of easy to use and economic HMI terminals, offers you many useful features, with the best quality graphical display in even the smallest touch screen. This makes the NQ family ideal for many different applications, for example from a simple semi-automatic packaging machine up to a bigger in-line packaging or filling machine. * High quality display - Sharp contrast and colors, long backlight life * Create applications quickly - Easy, full featured, intuitive software * Powerful HMI features - Function keys, Trending, Data logging, etc. Touch screen PC based HMI 50 Integrated controller Display size Box IPC Panel IPC 15 inch/ 17 inch 12 inch/ 15 inch 12.1 inch 10.4 inch 8.4 inch 5.7 inch 15 inch DyaloX DyaloX NSJ12 NSJ10 NSJ8 NSJ5 NS15 Page 57 Page 57 Page 61 Page 61 Page 63 Page 63 Page 65 HMI 3 Interaction type Function keys Scalable HMI Compact HMI 4 lines 2 lines Display size 12.1 inch/ 10.4 inch 8.4 inch 5.7 inch 5.7 inch 5.7 inch 3.5 inch/ 3.8 inch NS12/NS10 NS8 NS5 NS5 Handheld NQ5 NQ3 NT11 NT2S Page 65 Page 65 Page 66 Page 67 Page 69 Page 69 Page 70 Page 71 51 Selection table Integrated controller Model NSJ12 NSJ10 Type of Display 12.1 inch colour TFT Display Size / Resolution 246x184.5 mm (800x600 pixels) Control CJ1G-CPU45H; 60k-steps program memory, 128k-words data memory, logic instruction time 0.04 s Communication DeviceNet Master/Slave or PROFIBUS Master and optional Ethernet interface Expansion (1 board max.) Ethernet, Controller Link, I/O extension Dimensions in mm (HxWxD) Without expansion unit 241x315x73.3 With expansion unit 241x315x89.3 NSJ8 NSJ5 10.4 inch colour TFT 8.4 inch colour TFT 5.7 inch colour TFT or STN 215.5x162.4 mm (640x480 pixels) 170.9x128.2 mm (640x480 pixels) 117.2x88.4 mm (320x240 pixels) CJ1G-CPU45H; 60k-steps program memory, 128k-words data memory, logic instruction time 0.04 s CJ1G-CPU45H; 60k-steps program memory, 128k-words data memory, logic instruction time 0.04 s CJ1G-CPU45H; 60k-steps program memory, 128k-words data memory, logic instruction time 0.04 s CJ1M-CPU13; 20k-steps program memory, 32k-words data memory, logic instruction time 0.04 s CJ1M-CPU13; 20k-steps program memory, 32k-words data memory, logic instruction time 0.04 s DeviceNet Master/Slave or PROFIBUS Master and optional Ethernet interface DeviceNet Master/Slave or PROFIBUS Master and optional Ethernet interface DeviceNet Master/Slave or PROFIBUS Master and optional Ethernet interface Ethernet, Controller Link, I/O extension Ethernet, Controller Link, I/O extension Ethernet, Controller Link, I/O extension Without expansion unit 241x315x73.3 With expansion unit 241x315x89.3 Without expansion unit 177x232x73.3 With expansion unit 177x232x89.3 Without expansion unit 195x142x79 With expansion unit 195x142x95 Page 61 63 Scalable HMI Model NS15 Display 15 inch TFT colour NS10 NS8 NS5 NS5 handheld 10.4 inch TFT colour 8.4 inch TFT colour 5.7 inch Monochrome or STN/TFT colour 5.7 inch STN colour 800x600 pixels (SVGA) 640x480 pixels (VGA) 640x480 pixels (VGA) 320x240 pixels (QVGA) 320x240 pixels (QVGA) Nr. of colours 256 (32,768 for image data) 256 (32,768 for image data) 256 (32,768 for image data) 256 (32,768 for image data) Monochrome 16 greyscales, STN/TFT 256 colours (STN 4096, TFT 32,768 for image data) 256 colours (4096 colours for image data) Memory Size 60MB screen memory 60MB screen memory, 32,768 words + 32,768 bits internal memory and 8192 words + 8192 bits retentative memory 60MB screen memory, 32,768 words + 32,768 bits internal memory and 8192 words + 8192 bits retentative memory 60MB screen memory, 32,768 words + 32,768 bits internal memory and 8192 words + 8192 bits retentative memory 60MB screen memory, 32,768 words + 32,768 bits internal memory and 8192 words + 8192 bits retentative memory 60MB screen memory, 32,768 words + 32,768 bits internal memory and 8192 words + 8192 bits retentative memory Ethernet, Controller Link, Video input board (RGB/Composite) Ethernet, Controller Link, Video input board (RGB/Composite) Ethernet, Video input board (RGB/Composite) Ethernet RS-232 or RS-422 communication depending on cable 241x315x48.5 241x315x48.5 177x195x48.5 142x195x54 176x223x70.5 (excl. emergency button) 66 67 Resolution 1024x768 pixels (XGA) Options Controller Link, Video input board (NS-CA002) Dimensions in mm (HxWxD) 300x400x80 Page 65 52 NS12 12.1 inch TFT colour Human machine interfaces (HMI) NQ5-TQ Display 5.7 inch TFT Colour LED backlight Resolution 320x240 pixels Number of colours 256 (32.000 for image data) Memory 8 MB Communication ports 2xRS-232/RS-422A/RS-485 1xUSB Host, 1 x USB Slave 1xEthernet Dimensions in mm (HxWxD) 142x195x50 NQ5-SQ NQ5-MQ NQ3-TQ NQ3-MQ 5.7 inch STN Colour CCFL backlight 5.7 inch STN Monochrome CCFL backlight 3.5 inch TFT Colour LED backlight 3.8 inch FSTN Monochrome LED backlight 320x240 pixels 320x240 pixels 320x240 pixels 320x240 pixels 256 (4096 for image data) Monochrome blue mode, 16 gradations 256 (32.000 for image data) Monochrome black/white, 4 gradations 8 MB 8 MB 8 MB 4 MB 2xRS-232/RS-422A/RS-485 1xUSB Host, 1 x USB Slave 2xRS-232/RS-422A/RS-485 1xUSB Host, 1 x USB Slave 1xRS-232/RS-422A/RS-485 1xUSB Host, 1 x USB Slave 1xEthernet 1xRS-232/RS-422A/RS-485 1xUSB Host, 1xUSB Slave 142x195x50 142x195x50 102x128x44.5 102x128x44.5 3 Model Compact HMI Page 69 Category Model Function-key HMI NT11 Type of Display LED backlight LCD Number of F-keys 22 Number of characters 20x4 lines NT2S LED backlight LCD 6 or 20 depending on model 16x2 lines Printer connection Yes Depending on model Number of screens 250 65,000 (limited by memory) Size in mm (HxWxD) 113x218x38.2 Page 70 HMI Category 6 F-keys 60x109x43 20 F-keys 107x107x43 71 53 54 Human machine interfaces (HMI) HMI-Connection System configuration (Picture represents backside of a SYSMAC One unit) Memory card interface (Display part) Memory card interface (Controller part) CF HMI For application back up and saving PLC data, etc. RS-232C Port C DeviceNet or PROFIBUS CF For screen captures, recipes and saving data log, etc. 3 Available both on NS and SYSMAC One series Only available on SYSMAC One series DeviceNet PROFIBUS RS-232C port B RS-232C port A Ethernet USB slave Only available on NS series Printer PC RS-232C, DOS/V transfer cable XW2Z-S002 (2m) RS-422A/485 conversion unit CJ1W-CIF11 (~50m) NS-AL002 (~500m) PictBridge technology PC General purpose USB cable PLC PLC USB serial conversion cable CS1W-CIF31 Barcode reader Serial WE70 Wireless Printer Serial RS-422A/485 conversion unit CJ1W-CIF11 NS-AL002 PC Temperature controller E5_N, EJ1, etc. PLC RS-232C, PT-PLC connection cable XW2Z-200T (2m) XW2Z-500T (5m) Barcode reader PC I/O terminals RS-232C, DOS/V transfer cable XW2Z-S002 (2m) USB, serial conversion cable CS1W-CIF31 Inverters Memory link, single board Computer, etc. Temperature controller, E5_N, EJ1, etc. GRT1 series SmartSlice I/O CompoWay/F(direct serial connection to HMI) Inverter RS-422A/485 Other companys equipments non-Omron device 55 56 Dyalox PC based HMI The DyaloX Industrial PC is designed to provide exceptional performance operating around-the-clock throughout its lifetime. Drawing on our many years of experience in industrial-class standalone PC-based equipment, we have created unique self-diagnostic hardware and software, such as the Omron RAS solution, to ensure that DyaloX IPCs will keep on running long after other IPCs have given up. Omron RAS solution Industrial-grade 600 MHz or 1.3 GHz Intel Celeron CPU Reliable silicon storage up to 8GB Fan-less heat sink cooling for enhanced reliability 3 year warranty, 5 year minimum availability, 7 year courier repair service 3 * * * * * Ordering information DyaloX IPC Type Industrial PC panel, 600 MHz CPU Industrial PC panel, 1.3 GHz CPU Industrial PC box, 1.3 GHz CPU Order Code 12 inches, 600 MHz, 512 MB internal, black NSA12-TX12B 12 inches, 600 MHz, 512 MB internal, silver NSA12-TX12S 15 inches, 600 MHz, 512 MB internal, black NSA15-TX12B 15 inches, 600 MHz, 512 MB internal, silver NSA15-TX12S 12 inches, 1.3 GHz, 512 MB internal, 2 GB storage, black NSA12-TX01B-E 12 inches, 1.3 GHz, 512 MB internal, 2 GB storage, silver NSA12-TX01S-E 15 inches, 1.3 GHz, 512 MB internal, 2 GB storage, black NSA15-TX01B-E 15 inches, 1.3 GHz, 512 MB internal, 2 GB storage, silver NSA15-TX01S-E 1.3 GHz, RAM: 512 MB, storage: 2 GB NSA-CPU01-E 1.3 GHz, RAM: 512 MB, storage: 4 GB NSA-CPU02-E 1.3 GHz, RAM: 1 GB, storage: 2 GB NSA-CPU03-E 1.3 GHz, RAM: 1 GB, storage: 4 GB NSA-CPU04-E Touch panel Type Touchscreen panel Order Code 15 inches, black NSA-TX151B 15 inches, silver NSA-TX151S 17 inches, black NSA-TY171B 17 inches, silver NSA-TY171S Accessories Type Order Code 2 GB CF with XP Embedded English NSA-CEX02-E 4 GB CF with XP Embedded English NSA-CEX04-E 8 GB CF with XP Embedded English NSA-CEX08-E 512 MB DDR-SD RAM (non-ECC) NSA-MR581 1 GB DDR-SD RAM (non-ECC) NSA-MR191 DVI & USB cable 0.1 m NSA-DU02 DVI & USB cable 2 m NSA-DU22 DVI & USB cable 5 m NSA-DU52 DVI cable 10 m NSA-DV101 Set of 5 Anti-reflection sheets for 12 inches NS12-KBA04 Set of 5 Anti-reflection sheets for 15 inches NS15-KBA04 Battery for NSA12/15-TX01, NSA-CPU NSA-BAT01 Battery for NSA12/15-TX12 NSA-BAT03 HMI Industrial PC created for 24/7 operation in the most demanding industrial environments 57 Dyalox PC based HMI DyaloX IPC specifications Main specifications Item NSA1_-TX12 NSA1_-TX01_-E OS CF with Windows XP embedded*1 Preinstalled Windows XP embedded Processor 600 MHz Intel Celeron-M 1.3 GHz Intel Celeron-M Processor Processor Storage device Type Industrial CF memory or DiskOnModule (Flash memory) HDD*1 Memory Interface Special RAS board 4 GB 2 GB 4 GB CF: 100,000 write NAND flash memory: 100,000 write cycles (to the same block)*2 cycle/block HDD: 2 years at 24 hours/day operation, 3 years at 8 hours/day operation Main memory 512 MB DDR-SDRAM (non-ECC) Cache memory 512 KB Level 2 cache memory (built into the CPU) Keyboard - PS/2 keyboard with 6-pin MINI DIN connector Mouse - PS/2 mouse with MINI DIN connector Serial ports 2 ports conforming to EIA RS-232C for 9-pin D-SUB male connectors Ethernet 2 x 10 BASE-T/ One 10 BASE-T/100 BASE-TX port for an RJ45 connector 100 BASE-TX RJ45 connector USB ports 4 x USB 2.0/1.1 2 USB 2.0/1.1 ports for 2 USB 2.0/1.1 ports for USB type-A connectors for type-A connectors. USB type-A connectors 2 USB 1.1 for USB type-A connectors (2 on front panel, cable 3 m max.) Memory Card 1 CF Card slot Video output - Audio - 512 MB DDR-SDRAM (non-ECC) 1GB DDR-SDRAM (non-ECC) 1 DVI port for DVI-I connector Line-In/Line-Out/Mic-In for mini jack PCI expansion bus, 2 slots External input port 3-pin connector port for the UPS power interruption signal Status LEDindicators 4 (RUN/BATLOW/ERR/DIAG) Motherboard RAS functions Alive connection monitoring, device restart, timer start, startup and shutdown monitoring, backlight lit time measurement, UPS power interrupt signal output, and logging functions Standard PC RAS info, post error logging, post error retry, CMOS data recovery POWER LED indicator Yes (green) Service life*3 50,000 hours at 40C *1 *2 NSA-CPU04-E Service life (write cycles) RAS functions Special RAS board functions Battery life NSA-CPU03-E CF: 2/4/8 GB (with OS) IDE I/F*1 PCI expansion bus, 1 slot 2 GB NSA-CPU02-E Capacity Expansion slots 2 GB NSA-CPU01-E 50,000 hours at 30C Main board 5 years at 25C (NSA-BAT03) 5 years at 25C (NSA-BAT01) RAS board 5 years at 25C (NSA-BAT03) 5 years at 25C (NSA-BAT01) Sold separately Calculate condition Free area: 500 MB (*excluding OS & Application) Overwrite data size/time: 0.5 MB/time Overwrite times/day: 10,000 times/day MTBF: (500 MB *100,000 times) / (0.5 MB *10,000 times/day) = 10,000 days = 27 years *3 The service life is a guideline that is provided strictly for reference. It varies with factors such as the installation location and operating conditions. 58 Dyalox PC based HMI Item NSA12-TX12_-E Display panel Type TFT colour LCD Backlight Size 12.1 inches Resolution 1024x768 dots Brightness 300 cd/m2 (typical) Viewing angle 130 left to right, 90 up and down Colours displayed 262,144 Type 2 CCFL NSA15-TX12_-E NSA12-TX01_-E NSA15-TX01_-E 15 inches 12.1 inches 15 inches 4 CCFL 2 CCFL 4 CCFL 185.5x247 229x305 HMI Touch Panel specifications Brightness adjustment Three-level software adjustment*1 Touch panel Interface The software reads the lamp burnout detection signal from the inverter*2 Service life 50,000 hours min.*3 Type Analogue resistive type Effective input area Size in mm (HxW) 185.5x247 Operating service life 10,000,000 operations (with non-stop key stroking using fingers to input) 100,000 characters (with non-stop character entry using a stylus to input) USB ports 4 x USB2.0/1.1 for type-A connectors (2 on front side) Video Input - POWER LED indicator Yes (green) Service life*4 50,000 hours at 25C 3 Backlight not lit detection 229x305 2 x USB2.0/1.1 for type-A connectors 50,000 hours at 40C *1 *2 *3 The contrast cannot be adjusted significantly. It is not the service life, but rather lamp failure due to hardware problems such as a broken wire that is detected. Backlight not lit detection means both backlight lamps have burnt out. The service life is a guideline for maximum contrast at room temperature with normal humidity and is provided strictly for reference. It varies significantly with the ambient temperature. The service life will be shorter under extreme (high or low) temperature conditions and falls off sharply particularly under low-temperature conditions. *4 The service life is a guideline that is provided strictly for reference. It varies with factors such as the installation location and operating conditions. General specifications Item NSA1_-TX12_-E Rated supply voltage 24 VDC Allowable supply voltage range 20.4 VDC to 27.6 VDC (24 VDC 15%) 20.0 VDC to 27.6 VDC (24 VDC 15%) Power consumption 12 inches: 65 W max. 15 inches: 75 W max. 12 inches: 80 W max. 15 inches: 100 W max. Ambient operating temperature 0 to 50C*1 Ambient storage temperature -10 to 60C*1 Ambient operating humidity 10% to 80% with no condensation*1 Ambient storage humidity 10% to 85% with no condensation*1 Operating atmosphere Must be free of corrosive gases. Must be fairly dust free. Noise resistance Conforms to IEC6100-4-4, power supply line: 2 kV Vibration resistance (in operation) Conforms to JIS C0041, 0.05 mm amplitude at 10 to 55 Hz for 50 min. Each in the X, Y, and Z directions Shock resistance (in operation) Conforms to JIS C0041, 196 m/s2 three times each in the X, Y, and Z directions Degree of protection Front panel: IP65 or the equivalent*1 Weight 12 inches: 5 kg max. 15 inches: 7 kg max. 12 inches: 5 kg max. 15 inches: 7 kg max. 4 kg max. Dimensions in mm (HxWxD) 12 inches: 281x342x98 15 inches: 296.5x397.5x103 12 inches: 264x322x100 15 inches: 312x384x108 233x308x76.5 *1 NSA1_-TX01_-E NSA-CPU0_-E 60 W max. - For more information, please check the user manual. CF & HDD Item NSA-CEX02 NSA-CEX04 NSA-CEX08 Storage capacity 2 GB 4 GB 8 GB 59 Dyalox PC based HMI Touch panel specifications (box model) Item NSA-TX151 Display panel Type TFT colour LCD Backlight NSA-TY171 Size 15.0 inches 17.0 inches Resolution 1024x768 dots 1280x1024 dots Brightness 270 cd/m2 (typical) 200 cd/m2 (typical) Viewing angle 130 left to right, 90 up and down Colours displayed 262,144 Type 2 CCFL 4 CCFL Brightness adjustment 10 level adjustment by rotary switch Touch panel Interface Service life 50,000 hours min.*1 Type Analogue resistive type Effective input area Size in mm (HxW) 229x305 Operating service life 10,000,000 operations (with non-stop key stroking using fingers to input) 100,000 characters (with non-stop character entry using a stylus to input) USB ports 3 x USB 1.1 for type-A connectors (2 on front side) 1 x USB 1.1 (used for touch) for type-B connector Video Input 1 x DVI-D port POWER LED indicator Yes (green) Service life*2 50,000 hours at 30C 272x340 *1 The service life is a guideline for maximum contrast at room temperature with normal humidity and is provided strictly for reference. It varies significantly with the ambient temperature. The service life will be shorter under extreme (high or low) temperature conditions and falls off sharply particularly under low-temperature conditions. *2 The service life is a guideline that is provided strictly for reference. It varies with factors such as the installation location and operating conditions. General specifications (box model) Item NSA-TX151 Rated supply voltage 24 VDC Allowable supply voltage range 20.0 VDC to 27.6 VDC (24 VDC 15%) Power consumption 40 W max. Ambient operating temperature 0 to 50C*1 Ambient storage temperature -10 to 60C*1 Ambient operating humidity 10% to 80% with no condensation*1 Ambient storage humidity 10% to 85% with no condensation*1 Operating atmosphere Must be free of corrosive gases. Must be fairly dust free. Noise resistance Conforms to IEC6100-4-4, power supply line: 2 kV Vibration resistance (in operation) Conforms to JIS C0041, 0.05 mm amplitude at 10 to 55 Hz for 50 min. Each in the X, Y, and Z directions Shock resistance (in operation) Conforms to JIS C0041, 196 m/s2 three times each in the X, Y, and Z directions Degree of protection IP65F (front panel oil protection)*1 Weight 6 kg max. 7 kg max. Dimensions in mm (HxWxD) 328x404x57 371x436x57 *1 60 For more information, please check the user manual. NSA-TY171 55 W max. NSJ12/NSJ10 Integrated controller * * * * * HMI + PLC with 2 separate CPUs for greater performance and reliability Transparent architecture for easy remote maintenance Compact design occupying less panel space Flexible and cost-effective solution with multiple screen sizes, CPUs & networks Smart Active Parts for graphical interaction to field devices Ordering Information Type Order Code SYSMAC One 12.1" TFT SYSMAC One 12.1" TFT SYSMAC One 10" TFT CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H SYSMAC One 10" TFT CJ1G-CPU45H PROFIBUS PROFIBUS PROFIBUS PROFIBUS with Ethernet no Ethernet with Ethernet no Ethernet Black NSJ12-TS01B-G5P Ivory NSJ12-TS01-G5P Black NSJ12-TS00B-G5P Ivory NSJ12-TS00-G5P Black NSJ10-TV01B-G5P Ivory NSJ10-TV01-G5P Black NSJ10-TV00B-G5P Ivory NSJ10-TV00-G5P Type Order Code SYSMAC One 12.1" TFT SYSMAC One 12.1" TFT SYSMAC One 10" TFT CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H SYSMAC One 10" TFT CJ1G-CPU45H DeviceNet DeviceNet DeviceNet DeviceNet with Ethernet no Ethernet with Ethernet no Ethernet Black NSJ12-TS01B-G5D Ivory NSJ12-TS01-G5D Black NSJ12-TS00B-G5D Ivory NSJ12-TS00-G5D Black NSJ10-TV01B-G5D Ivory NSJ10-TV01-G5D Black NSJ10-TV00B-G5D Ivory NSJ10-TV00-G5D Note: For the accessories, please refer to page 68 Specifications Item NSJ12-TS0_-G5D Supply voltage 24 VDC Allowable supply voltage range 20.4 to 27.6 VDC (24 VDC 15%) Power consumption 30 W max. Current consumption Controller Section Internal 5 V: 500 mA max. DeviceNet Section Internal 5 V: 200 mA max., External 24 V: 18 mA max. Inrush current *1 At 24 VDC: 10 A/20 ms max. for cold start at room temperature Ambient operating temperature (depending on angle of display surface off horizontal) *2 90 to 60: 0 to 50C 60 to 30: 0 to 45C 30 to 0: Use prohibited Ambient storage temperature -20 to 60C Ambient operating humidity 0 to 40C: 35% to 85% (with no condensation) 40 to 50C: 35% to 60% (with no condensation) Ambient operating environment No corrosive gases Insulation resistance 20 M min. (at 100 VDC) between DC external and GR terminals Dielectric strength 800 VDC for 1 min between DC external and GR terminals, leakage current: 10 mA max. Noise immunity 2 kV on power supply line (conforming to IEC 61000-4-4) Vibration resistance (during operation) 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y and Z directions for 80 minutes Shock resistance (during operation) 147 m/s2, 3 times each in X, Y and Z directions External dimensions in mm (WxHxD) Without Expansion unit 315x241x73.3 With Expansion unit 315x241x89.3 Panel output dimensions 302+10x228+10 mm (WxH) Panel thickness: 1.6 to 4.8 Grounding 100 or less Weight 2.7 kg max. Degree of protection Front operating panel: Equivalent to IP65F and NEMA4*3 NSJ10-TV0_-G5D 2.5 kg max. 61 3 The NSJ12 and NSJ10 are combined with a CJ1G-CPU 45H and a DeviceNet or PROFIBUS interface fitted into a compact housing occupying less panel space than the separate products. Programming can be done via the standard high-speed USB port. The SYSMAC One is completely transparent, so the PLC, network (including field devices) and HMI can be accessed via a single port. A great advantage when servicing your machine remotely. HMI HMI with integrated PLC and Network interface NSJ12/NSJ10 Integrated controller Item NSJ12-TS0_-G5D Battery life 5 years (at 25C) The SRAM and RTC will be backed up for 5 days after the battery runs low (i.e., after the indicator lights orange). The SRAM and RTC will be backed up by a super capacitor for 5 minutes after removing the old battery (i.e., after turning ON power after 5 minutes). International standards Conforms to cULus and EC Directives. *1 NSJ10-TV0_-G5D A delay circuit that charges a capacitor is used to limit the inrush current. If a hot start is performed when the power supply has been OFF only a short period of time, the capacitor will still be charged and the inrush current specified above will be exceeded by up to approximately five times the specified value. When selecting fuses or breakers for external circuits, allow sufficient margin in the melting temperatures, detection characteristics, and inrush current. *2 Display angles off horizontal are as follows: 90 D ac urf ys la isp e 30 Horizontal 0 *3 62 May not be applicable in locations with long-term exposure to oil. NSJ8/NSJ5 Integrated controller * * * * * HMI + PLC with 2 separate CPUs for greater performance and reliability Transparent architecture for easy remote maintenance Compact design taking up less panel space Flexible and cost effective solution with multiple screen sizes, CPUs & networks Smart Active Parts for graphical interaction to field devices Ordering Information Type SYSMAC One 8.4" TFT SYSMAC One 8.4" TFT SYSMAC One 5.7" TFT SYSMAC One 5.7" TFT SYSMAC One 5.7" STN SYSMAC One 5.7" STN SYSMAC One 8.4" TFT SYSMAC One 8.4" TFT SYSMAC One 5.7" TFT SYSMAC One 5.7" TFT SYSMAC One 5.7" STN SYSMAC One 5.7" STN Order Code CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H CJ1M-CPU13 CJ1M-CPU13 CJ1M-CPU13 CJ1M-CPU13 CJ1M-CPU13 CJ1M-CPU13 PROFIBUS PROFIBUS PROFIBUS PROFIBUS PROFIBUS PROFIBUS PROFIBUS PROFIBUS PROFIBUS PROFIBUS PROFIBUS PROFIBUS with Ethernet no Ethernet with Ethernet no Ethernet with Ethernet no Ethernet with Ethernet no Ethernet with Ethernet no Ethernet with Ethernet no Ethernet Black NSJ8-TV01B-G5P Ivory NSJ8-TV01-G5P Black NSJ8-TV00B-G5P Ivory NSJ8-TV00-G5P Black NSJ5-TQ11B-G5P Ivory NSJ5-TQ11-G5P Black NSJ5-TQ10B-G5P Ivory NSJ5-TQ10-G5P Black NSJ5-SQ11B-G5P Ivory NSJ5-SQ11-G5P Black NSJ5-SQ10B-G5P Ivory NSJ5-SQ10-G5P Black NSJ8-TV01B-M3P Ivory NSJ8-TV01-M3P Black NSJ8-TV00B-M3P Ivory NSJ8-TV00-M3P Black NSJ5-TQ11B-M3P Ivory NSJ5-TQ11-M3P Black NSJ5-TQ10B-M3P Ivory NSJ5-TQ10-M3P Black NSJ5-SQ11B-M3P Ivory NSJ5-SQ11-M3P Black NSJ5-SQ10B-M3P Ivory NSJ5-SQ10-M3P Type SYSMAC One 8.4" TFT SYSMAC One 8.4" TFT SYSMAC One 5.7" TFT SYSMAC One 5.7" TFT SYSMAC One 5.7" STN SYSMAC One 5.7" STN Order Code CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H CJ1G-CPU45H DeviceNet DeviceNet DeviceNet DeviceNet DeviceNet DeviceNet with Ethernet no Ethernet with Ethernet no Ethernet with Ethernet no Ethernet Black NSJ8-TV01B-G5D Ivory NSJ8-TV01-G5D Black NSJ8-TV00B-G5D Ivory NSJ8-TV00-G5D Black NSJ5-TQ11B-G5D Ivory NSJ5-TQ11-G5D Black NSJ5-TQ10B-G5D Ivory NSJ5-TQ10-G5D Black NSJ5-SQ11B-G5D Ivory NSJ5-SQ11-G5D Black NSJ5-SQ10B-G5D Ivory NSJ5-SQ10-G5D 63 3 The NSJ8 and NSJ5 are combined either with a CJ1G-CPU 45H or with a low-cost CJ1M-CPU13 PLC and a DeviceNet or PROFIBUS interface. It is fitted into a compact housing occupying less panel space than the separate products. Programming can be done via the standard high-speed USB port. The SYSMAC One is completely transparent, so the PLC, network (including field devices) and HMI can be accessed via a single port. A great advantage when servicing your machine remotely. HMI HMI with integrated PLC and Network interface NSJ8/NSJ5 Integrated controller Type Order Code SYSMAC One, 8.4" TFT CJ1M-CPU13 SYSMAC One, 8.4" TFT CJ1M-CPU13 SYSMAC One, 5.7" TFT CJ1M-CPU13 SYSMAC One, 5.7" TFT CJ1M-CPU13 SYSMAC One, 5.7" STN CJ1M-CPU13 SYSMAC One, 5.7" STN CJ1M-CPU13 DeviceNet DeviceNet DeviceNet DeviceNet DeviceNet DeviceNet with Ethernet no Ethernet with Ethernet no Ethernet with Ethernet no Ethernet Black NSJ8-TV01B-M3D Ivory NSJ8-TV01-M3D Black NSJ8-TV00B-M3D Ivory NSJ8-TV00-M3D Black NSJ5-TQ11B-M3D Ivory NSJ5-TQ11-M3D Black NSJ5-TQ10B-M3D Ivory NSJ5-TQ10-M3D Black NSJ5-SQ11B-M3D Ivory NSJ5-SQ11-M3D Black NSJ5-SQ10B-M3D Ivory NSJ5-SQ10-M3D Function CJ1G-CPU45H CJ1M-CPU13 UM capacity 60K steps 20K steps I/O 1,280 points 640 points Extended data memory 32K words x 3 banks - EM file memory Yes - Maximum number of Expansion Racks 3 1 FB program memory capacity 1024 KB 256 KB Maximum number of FB definitions 1,024 128 Maximum number of FB instances 2,048 256 Variable table sizes Note: For the accessories, please refer to page 68 128 KB 64 KB Item NSJ8-TV0_-G5D NSJ8-TV0_-M3D NSJ5-TQ1_-G5D NSJ5-SQ1_-G5D NSJ5-TQ1_-M3D NSJ5-SQ1_-M3D Supply voltage 24 VDC Allowable supply voltage range 20.4 to 27.6 VDC (24 VDC 15%) Power consumption 30 W max. Current consumption Controller Section Internal 5 V: 500 mA max. DeviceNet Section Internal 5 V: 200 mA max., External 24 V: 18 mA max. Inrush current *1 At 24 VDC: 10 A/20 ms max. for cold start at room temperature Ambient operating temperature (depending on angle of display surface off horizontal) *2 90 to 60: 0 to 50C 60 to 30: 0 to 45C 30 to 0: Use prohibited Ambient storage temperature -20 to 60C Ambient operating humidity 0 to 40C: 35% to 85% (with no condensation) 40 to 50C: 35% to 60% (with no condensation) Ambient operating environment No corrosive gases Insulation resistance 20 M min. (at 100 VDC) between DC external and GR terminals Dielectric strength 800 VDC for 1 min between DC external and GR terminals, leakage current: 10 mA max. Noise immunity 2 kV on power supply line (conforming to IEC 61000-4-4) Vibration resistance (during operation) 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y and Z directions for 80 minutes Shock resistance (during operation) 147 m/s2, 3 times each in X, Y and Z directions External dimensions in mm (WxHxD) Without Expansion unit 232x177x73.3 195x142x79 With Expansion unit 232x177x89.3 195x142x95 Panel output dimensions 220.5+0.500x165.5+0.500 mm (WxH) Panel thickness: 1.6 to 4.8 184+0.500x131+0.500 mm (WxH) Panel thickness: 1.6 to 4.8 Grounding 100 or less Weight 2.0 kg max. Degree of protection Front operating panel: Equivalent to IP65F and NEMA4*3 Battery life 5 years (at 25C) The SRAM and RTC will be backed up for 5 days after the battery runs low (i.e., after the indicator lights orange). The SRAM and RTC will be backed up by a super capacitor for 5 minutes after removing the old battery (i.e., after turning ON power after 5 minutes). International standards Conforms to cULus and EC Directives. Specifications *1 SQ0_: 21 W max. TQ0_: 22 W max. 90 to 30: 0 to 50C 30 to 0: 0 to 40C 1.1 kg max. A delay circuit that charges a capacitor is used to limit the inrush current. If a hot start is performed when the power supply has been OFF only a short period of time, the capacitor will still be charged and the inrush current specified above will be exceeded by up to approximately five times the specified value. When selecting fuses or breakers for external circuits, allow sufficient margin in the melting temperatures, detection characteristics, and inrush current. *2 Display angles off horizontal are as follows: 90 lay p Dis su rfa ce 30 Horizontal 0 *3 64 May not be applicable in locations with long-term exposure to oil. NS15/NS12/NS10/NS8 Scalable HMI One-touch machine management The NS-series is our advanced HMI series that covers a large range from 5.7" Monochrome STN to 15" TFT. Easily programmed it offers advanced features like, many communication possibilities, very good synergy with our PLC's and other devices with Ladder monitor, Smart Active Parts and proven reliability. HMI Perfect clarity and fast switching screens Extremely long backlight life (up to 50,000 hours) Support all European languages, Asian and Cyrillic Easy data logging on compact flash Large Memory size (60 MB) Support for several non-Omron PLC's 3 * * * * * * Ordering information Type TFT, 15'', 1024 x 768 pixels TFT, 12'', 800 x 600 pixels Order Code with Ethernet no Ethernet with Ethernet TFT, 10'', 640 x 480 pixels no Ethernet with Ethernet TFT, 8.4'', 640 x 480 pixels no Ethernet with Ethernet Black NS15-TX01B-V2 Silver NS15-TX01S-V2 Black NS12-TS00B-V2 Ivory NS12-TS00-V2 Black NS12-TS01B-V2 Ivory NS12-TS01-V2 Black NS10-TV00B-V2 Ivory NS10-TV00-V2 Black NS10-TV01B-V2 Ivory NS10-TV01-V2 Black NS8-TV00B-V2 Ivory NS8-TV00-V2 Black NS8-TV01B-V2 Ivory NS8-TV01-V2 Note: For the accessories, please refer to page 68 Specifications Item NS15 NS12 NS10 NS8 Display type 15 inch colour TFT 12 inch colour TFT 10 inch colour TFT 8 inch colour TFT Display resolution 1024x768 (XGA) 800x600 (SVGA) 640x480 (VGA) Number of colours 256 (32.768 for image data) Backlight 2xCCFL Backlight lifetime Min. 50000 hours 1xCCFL View angle Left/right 85, Top 70, Bottom 80 Left/right 60, Top 45, Bottom 75 Left/right 60, Top 35, Bottom 65 Left/right 65, Top 50, Bottom 60 Touch panel Analogue resistive touch Matrix resistive touch Number of functional keys 3 - Dimensions in mm (HxWxD) 304x405x75.8 241x315x48.5 177x195x48.5 Weight 4.2 kg max. 2.5 kg max. 2.0 kg max. Screen data capacity 60 MB Internal memory Bit memory: 32,767 bits, Word memory: 32,767 words, Retentative memory: 8,192 bits and 8,192 words. Memory card interface 1 slot ATA Compact Flash card Printer connection PictBridge support Serial (COM1) 1xRS-232 Serial (COM2) 1xRS-232/422/485 USB Slave For programming & printing Ethernet IEEE 802.3u 10Base-T/100Base-TX Expansion module Optional network/video unit Line voltage 24 VDC 15% Power consumption 45 W max. Battery CJ1W-BAT01 Battery lifetime 5 years (at 25C) Enclosure rating (front side) IP65F (equivalent to NEMA4) Obtained standards UL 1604 Class 1 Diff. 2, cUL, CE, Lloyds, DNV Operating environment No corrosive gases Noise immunity Conforms to IEC61000-4-4, 2 KV (power lines) Ambient operating temperature 0 to 50C*1 Ambient operating humidity 35% to 85% (0 to 40C) with no condensation, 35% to 60% (40 to 50C) with no condensation *1 1xRS-232 Optional video unit 25 W max. see manual for details. 65 NS5 Scalable HMI More power, smaller size This series consists of Monochrome models with 16 grey scales and STN/TFT models with up to 32,768 colours. It is equipped with a USB connection for project download/ upload and the possibility to communicate over Ethernet. One great advantage with the NS is that you can make use of Omron unique Smart Active Parts (SAP) that save you time when configuring, commissioning and maintaining your machine. SAP are pre-programmed, pre-tested visualisation objects with embedded communication code, bringing 'drag and drop' simplicity to HMI design. * * * * * * Perfect clarity and fast switching screens Extremely long backlight life (up to 75,000 hours) Support all European languages, Asian and Cyrillic Easy data logging on compact flash Large Memory size (60 MB) Support for several non-Omron PLC's Ordering information Type NS5-TQ Order Code TFT, 5.7'', 320x240 pixels no Ethernet with Ethernet NS5-SQ TFT, 5.7'', 320x240 pixels no Ethernet with Ethernet NS5-MQ STN, Monochrome 5.7'', 320x240 pixels no Ethernet with Ethernet Black NS5-TQ10B-V2 Ivory NS5-TQ10-V2 Black NS5-TQ11B-V2 Ivory NS5-TQ11-V2 Black NS5-SQ10B-V2 Ivory NS5-SQ10-V2 Black NS5-SQ11B-V2 Ivory NS5-SQ11-V2 Black NS5-MQ10B-V2 Ivory NS5-MQ10-V2 Black NS5-MQ11B-V2 Ivory NS5-MQ11-V2 NS5-SQ NS5-MQ Note: For the accessories, please refer to page 68 Specifications Item NS5-TQ Display type 5.7 inch colour TFT Display resolution 340x240 (QVGA) Number of colours 256 (32.768 for image data) 16 grey scales Backlight LED CCFL Backlight lifetime Min. 75000 hours Min. 50000 hours View angle Left/right 80, Top 80, Bottom 60 Left/right 45, Top 20, Bottom 40 Touch panel Matrix resistive touch Number of functional keys - Dimensions in mm (HxWxD) 142x195x54 Weight 1.0 kg max. Screen data capacity 60 MB Internal memory Bit memory: 32,767 bits, Word memory: 32,767 words, Retentative memory: 8,192 bits and 8,192 words. Memory card interface 1 slot ATA Compact Flash card Printer connection PictBridge support Serial (COM1) 1xRS-232 Serial (COM2) 1xRS-232 USB Slave For programming & printing Ethernet IEEE 802.3u 10Base-T/100Base-TX Expansion module - Line voltage 24 VDC 15% Power consumption 15 W max. Battery CJ1W-BAT01 Battery lifetime 5 years (at 25C) Enclosure rating (front side) IP65F (equivalent to NEMA4) Obtained standards UL 1604 Class 1 Diff. 2, cUL, CE, Lloyds, DNV Operating environment No corrosive gases Noise immunity Conforms to IEC61000-4-4, 2 KV (power lines) Ambient operating temperature 0 to 50C*1 Ambient operating humidity 35% to 85% (0 to 40C) with no condensation, 35% to 60% (40 to 50C) with no condensation *1 66 See manual for details. 5.7 inch monochrome NS5 handheld Scalable HMI NS5 handheld, suitable for use in harsh conditions 10 Function keys, 4 hardwired for inching Emergency switch on front plus enable switch on back of unit Well protected against water, IP65 Compact Flash, Serial and USB interface 3 * * * * HMI The NS series has evolved into a mobile format. Based on the standard 5.7" TFT colour version, we can offer a handheld version of the NS series. Offering 10 Function keys for most used functions and with a protection degree of IP65 it is the product to use in harsh environment where freedom of movement is needed. Ordering information Type NSH5 Order code TFT, 5.7", 320x240 pixels Black NSH5-SQR10B-V2 Accessories Type Order code Bracket NS handheld protecting emergency button from accidental activation NSH5-ATT01 Bracket NS handheld for wall mounting NSH5-ATT02 Cable NS handheld, RS-422, 10m UL NSH5-422UL-10M Cable NS handheld, RS-232, 10m UL NSH5-232UL-10M Cable NS handheld, RS-232, 3m UL NSH5-232UL-3M Specifications Memory card interface 1 slot ATA Compact Flash card Serial (COM1) 1xRS-232/RS-422A USB Slave For programming Line voltage 24 VDC 15% Power consumption 10 W max. Battery CJ1W-BAT01 Battery lifetime 5 years (at 25C) Enclosure rating IP65*1 Obtained standards UL 1604 Class 1 Diff. 2, cUL, CE, NEMA equivalent Operating environment No corrosive gases Noise immunity Conforming to IEC 61000-4-4: 2 kV (power supply line) Ambient operating temperature 0 to 40C Ambient operating humidity 35% to 85% max. (with no condensation) Vibration resistance (during operation) 10 to 57 Hz with amplitude of 0.075 mm, 57 to 150 Hz with acceleration of 9.8 m/s2 three minutes each in X, Y, and Z directions Shock resistance (during operation) 147 m/s2 three times each in X, Y, and Z directions Drop test*1 Dropped from 1 m. Conforming to JIS B 3502/IEC61131-2 *1 see manual for details. 67 Accessories NSJ/NS Integrated controller/Scalable HMI Ordering information Type Description Order code Cable Serial programming cable XW2Z-S002 USB programming cable, 2 m CP1W-CN221 PT-to-PLC Connecting Cable PT connection: 9 pins PLC connection: 9 pins Length: 2 m XW2Z-200T Length: 5 m XW2Z-500T Accessories Video input Inputs: 4 channels NTSC / PAL NS-CA001 Inputs: 2 channels NTSC / PAL, 1 channel RGB NS-CA002 Cable to connect NS-CA00_ to Video console unit F150-VKP (2 m) F150-VKP (5 m) Controller link interface unit NS-CLK21 RS-422A/485 adapter (50 m) CJ1W-CIF11 RS-422A adapter (500 m) Anti-reflection sheets (5 sheets) NS15-KBA04 NS12/10 NS12-KBA04 NS8 NS7-KBA04 NS5 NT30-KBA04 NS12/10 NS12-KBA05 NS8 NS7-KBA05 NS5 NT31C-KBA05 NS15 (1 cover) NS15-KBA05N NS12/10 NS12-KBA05N NS8 NS7-KBA05N NS5 NT31C-KBA05N Chemical-resistant cover (1 cover) NS5 NT30-KBA01 Attachment adapter (NT625C/631/631C series to NS12 series) NS12-ATT01 (NT625C/631/631C series to NS12 series) Black NS12-ATT01B (NT620S/620C/600S series to NS8 series) NS8-ATT01 (NT600M/600G/610G/612G series to NS8 series) NS8-ATT02 128 MB HMC-EF183 256 MB HMC-EF283 512 MB HMC-EF583 Anti-reflection protective covers (5 pack) Transparent protective covers (5 pack) Memory card 68 NS-AL002 NS15 Memory card adapter for PC HMC-AP001 Battery CJ1W-BAT01 NQ5/NQ3 Compact HMI Power behind a clear display The NQ Series comes in different display sizes and each in a colour and monochrome version. All of them display clear and sharp pictures, buttons, text and graphs on a modern touch screen. HMI Clear and bright display Portrait/Landscape display (NQ5) USB Host and Slave connections Easy to use software Trending, Logging, Alarm handling, etc. 3 * * * * * Ordering information Type Order Code Colour TFT 5.7 inch, 320x240 pixels Ethernet NQ5-TQ010-B Colour STN 5.7 inch, 320x240 pixels No Ethernet NQ5-SQ000-B No Ethernet, Portrait model NQ5-SQ001-B No Ethernet NQ5-MQ000-B No Ethernet, Portrait model NQ5-MQ001-B No Ethernet NQ3-TQ000-B Ethernet NQ3-TQ010-B No Ethernet NQ3-MQ000-B Monochrome STN Colour TFT Monochrome FSTN 5.7 inch, 320x240 pixels 3.5 inch, 320x240 pixels 3.8 inch, 320x240 pixels Accessories Type Cables Order code Mini-peripheral port CJ1/CS1/CQM1H/CPM2C PLC, 2 m NQ-CN221 Serial port RS-232 CJ1/CS1/CP1/CQM1H PLC, 2 m NQ-CN222 Serial port RS-232 CJ1/CS1/CP1/CQM1H PLC, 5 m NQ-CN521 USB programming cable, 2 m CP1W-CN221 Serial programming cable, 2 m NT2S-CN002 Software NQ-Designer can be downloaded for free from Omron website. - Accessories Maintenance set including 2 x 24 V plug and 4 x mounting clamps NQ-ATT01 Battery NQ-BAT01 Specifications Item NQ5-TQ NQ5-SQ NQ5-MQ NQ3-TQ NQ3-MQ Display type 5.7 inch Colour TFT 5.7 inch Colour STN 5.7 inch Monochrome STN blue mode 3.5 inch Colour TFT 3.8 inch Monochrome FSTN black/white Display resolution 320x240 (QVGA) Number of colours 256 (32.000 for image data) 256 (4096 for image data) 16 gradations 256 (32.000 for image data) 4 gradations Backlight LED Backlight lifetime Min. 50,000 hours at 25C Touch panel Analogue resistive touch Number of functional keys 6 5 Dimensions in mm (HxWxD) 142x195x50 102x128x44.5 Weight 0.4 kg max. Screen data capacity 8 MB Internal memory Bit, Word and Retentive memory Serial (COM1) 1xRS-232/422/485 Serial (COM2) 1xRS-232 USB Slave For programming USB Host For USB stick file transfer Ethernet IEEE 802.3u 10Base-T/100Base-TX Line voltage 24 VDC 15% Power consumption 12 W max. Battery NQ-BAT01 (3 V coin battery) Battery lifetime 5 years (at 25C) Enclosure rating (front side) IP65 Obtained standards CE, cULus, Lloyds Operating environment No corrosive gases Ambient operating temperature 0 to 50C*1 Ambient operating humidity 10-85% RH, no condensation *1 1xCCFL LED 8 MB 4 MB - - 10 W max. see manual for details. 69 NT11 Function-key HMI HMI with four text lines and 22 F-keys The NT11 is a Function key HMI with four text lines that can each hold up to 20 characters. It has a parallel printer connection next to a serial port for connection to a PLC. It has a LED backlight that has a life expectancy of at least 50,000 hours. * * * * * Easy programming software. Small size and installation depth. Customisable F-Keys Printer connection. Cost effective solution. Ordering information Type STN monochrome Order code Ten-key type Ivory NT11-SF121-EV1 Black NT11-SF121B-EV1 Accessories Type Description Cables For screen transfer For PLC connection Order code XW2Z-S002 PT: 9-pin PLC: 9-pin Cable length: 2 m XW2Z-200T Cable length: 5 m XW2Z-500T PT: 9-pin PLC: Mini-peripheral Cable length: 2 m NT-CN221 Software Type Order code NTST Version 4.8 NTZJCAT1EV4 Upgrade NTST Version 4.8 NTZJCAT1EV4S Specifications Size in mm (HxWxD) 113x218x38.2 Effective display area 100x40mm (160x64 pixels) Line voltage 24 VDC 15% Function keys 22 keys Touch panel - Obtained standards CE, cULus No. of display characters (standard characters) 20 characters x 4 lines No. of registered screens 250 Screen data capacity (standard) 32 KB Expansion memory - Memory card interface - Printer connection Supported Backlight life 50,000 hours average 70 NT2S Function-key HMI HMI with two text lines, 6 or 20 F-keys and up to two serial ports The NT2S is the smallest HMI that we can offer you. It is based on a 16 x 2 lines LCD display with 6 or 20 Function keys. It offers IP65 protection, an optional RTC and printer connection. HMI Easy and free programming software. Small size and installation depth. Real Time Clock (depending on model). Printer connection (depending on model). Cost effective solution. 3 * * * * * Ordering information Type STN monochrome Order code Programmable 6-key type, Black NT2S-SF121B-EV2 NT2S-SF122B-EV2 PLC controlled Programmable NT2S-SF123B-EV2 20-key type, Black NT2S-SF125B-E NT2S-SF126B-E PLC controlled NT2S-SF127B-E Type Description Order code NT2S-SF121/125 and NT3S peripheral port CPM series except CPM2C, 2 m NT2S-CN212-V1 NT2S-SF121/125 and NT3S peripheral port CPM series except CPM2C, 5 m NT2S-CN215-V1 NT2S-SF122/SF123/SF126/SF127 peripheral port CPM series except CPM2C, 2 m NT2S-CN222-V1 NT2S-SF122/SF123/SF126/SF127 peripheral port CPM series except CPM2C, 5 m NT2S-CN225-V2 NT2S-SF121/125 and NT3S mini-peripheral port CJ1/CS1 and CPM2C series, 2 m NT2S-CN223-V2 NT2S-SF122/SF123/SF126/SF127 mini-peripheral port CJ1/CS1 and CPM2C series, 2 m NT2S-CN224-V1 NT2S-SF121/125 and NT3S serial port CJ1/CS1/CP1/CPM2/CQM1(H), 2 m NT2S-CN232-V1 NT2S-SF121/125 and NT3S serial port CJ1/CS1/CP1/CPM2/CQM1(H), 5 m NT2S-CN235-V1 NT2S-SF122/SF123/SF126/SF127 serial port CJ1/CS1/CP1/CPM2/CQM1(H), 2 m NT2S-CN242-V1 All NT2S and NT3S models serial programming cable, 2 m NT2S-CN002 Accessories Software Type Order code This software is provided free of charge and features Windows fonts, a Multi language import/export utility, a character map to design your own characters and can be used to place bitmaps in your application. NTXS Specifications Size in mm (HxWxD) 60x109x43 (6 F-keys), 107x107x43 (20 F-keys) Effective display area 56x11 mm Line voltage 24 VDC 10% Touch panel - Obtained standards CE, cULus No. of display characters (standard characters) 16 characters x 2 lines No. of registered screens 65,000 max. Screen data capacity (standard) 24 KB in Programmable models Expansion memory - Memory card interface - Internal memory 1K words data, 1K words retentative memory Printer connection Supported Multi-Vendor support Supported for several non-Omron PLCs. *1 Backlight life LED, min. 50,000 hours *1 Please contact Omron for a list of available drivers. 71