4/86 PCB terminal rising cage clamp system Type 8375 Pitch 7.5 mm 4 mm? Conductor horizontal in relation to the PCB UL data field-/factory wiring No. 22/30 - 10 AWG 300 V 30 A/35A CSA data No. 22 - 12 AWG 300 V Gr. B 20A Approvals AENOOS Nominal conductor size: 4 mm? Connection range: 0.14 -6 mm? single-core/ 0.14 -4 mm? finely stranded Rated voltages, see below Rated current: 30 A Type Part No. B. aty. Pitch 7.5 mm Individual poles, modular 1 pole | 8375 25.700.0153.0 100 Further number of poles on request 2 o Z QO & o BS 29 Pa oO 2 2 tC oO a Accessories Pitch intermediate plate (extends pitch from 7.5 to 10 mm) 07.300.2753.0 Test plug, red ST 2/2,3 Z5.553.2921.0 Marking strips, unmarked | 9705 A/7,5/10 04.242.7553.0 1-10, 11-20 etc. 991 - 999 marked | 9705A/7,510B 04.842.7553.0 Marking branch, text 1,2,3...0 | 9704A/1-08 04.841.2150.0 Individual marker unmarked | 9705A 04.242.0850.0 1} marked | 9705 AB 04.842.0850.0 1} marked on request Rated voltages: Pitch 7.6 mm VDE 0110/01.89 500 V/6 kV/3 - overvoltage category Ill *1000 V/6 kV/2 - overvoltage category |l **1000 V/6 kV/1 - overvoltage category | Rated voltages: Pitch 10 mm VDE 0110/01.89 690 V/8 kV/3 - overvoltage category Ill **1000 V/8 kV/2 - overvoltage category || 1000 V/8 kV/1 - overvoltage category | Materials Insulating part: PA 6.6 grey, UL 94V-0 Clamping part: galvanized steel Contact socket with solder pin: tinned E-copper Clamping screw: galvanized steel x up to 1250 V if expected overvoltage <6 kV up to 1600 V if expected overvoltage <6 kV ~* up to 1600 V if expected overvoltage <8kV = Up to 2000 V if expected overvoltage <8kV kk