42
%
TPC Series
Low ESR TACmicrochip™
The world’s smallest surface mount
Tantalum capacitor, small enough to create
space providing room for ideas to grow.
TACmicrochip™ is a major breakthrough
in miniaturization without reduction in
performance.
It offers you the highest energy store in an
0603 or 0805 case size; enhanced high
frequency operation through unique ESR
performance with temperature and voltage
stability.
CASE DIMENSIONS: millimeters (inches)
Termination Minimum Average
Code EIA EIA Length (L) Width (W) Height (H) Spacing(S) Termination Mass
Code Metric Length (Lt)
L0603 1608-10 1.60 0.85 0.85 0.55 min 0.15 (0.006) 8.6mg
(0.063 ) (0.033 ) (0.033 )
R0805 2012-15
2.00 1.35 1.35
0.70 min 0.15 (0.006) 29.9mg
(0.079 ) (0.053 ) (0.053 )
L
SLt W
H
POLARITY BAND NOT TO
EXCEED CENTER LINE
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
TPC
Type
TACmicrochip™
R
Case Size
0603=L
0805=R
106
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
K=±10%
M=±20%
010
Rated DC Voltage
002=2Vdc
003=3Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
1800
Maximum ESR
in Milliohms
See note below
HOW TO ORDER
R
Packaging
(see table below)
Standard
Reel Tin Termination Gold Termination
Size Plastic Tape Plastic Tape
Case R/L R/L
7" Rxxxx Axxxx
41⁄4" Xxxxx Fxxxx
Packaging Suffix
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 1 µF to 47 µF
Capacitance Tolerance: ±10%; ±20%
Leakage Current DCL: 0.01CV or 0.5µA whichever is the greater
Rated Voltage (VR)+85°C: 3 4 6.3 10 16 20 25
Category Voltage (VC)+125°C: 2 2.7 4 7 10 13 17
Surge Voltage (VS)+85°C: 3.9 5.2 8 13 20 26 32
Surge Voltage (VS)+125°C: 2.6 3.2 5 8 12 16 20
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, V with 0.1Ω/V series impedance,
60% confidence level
Termination Finish: Nickel and Tin Plating (standard),
Nickel and Gold Plating option available upon request
TECHNICAL SPECIFICATIONS
ENVIRONMENTAL FRIENDLY
COMPONENT
NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
NOTE: xxxx = ESR Value in Milliohms
43
Capacitance Voltage Rating DC (VR) at 85°C
µF Code 2.0V 3.0V 4.0V 6.3V 10V 16V 20V 25V
0.33 334
0.47 474
0.68 684
1.0 105 R(3000)
1.5 155
2.2 225
3.3 335 L(5000)
4.7 475 L(5000)
6.8 685
10 106 L(4000) L(4000),R(1800) R(1800)
15 156 R(1800) R(1500)
22 226 R(1800) R(1500)
33 336 R(1800) R(1500)
47 476 R(1500)
68 686
100 107
150 157
220 227
TPC Series
Low ESR TACmicrochip™
LOW ESR RANGE
(LETTER DENOTES CASE SIZE) (ESR in mΩ)
Rated DCL DF ESR 100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX EIA Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25°C 85°C 125°C 25°C 85°C 125°C
TPCR336*003# 0805 R 33 3.0 1.0 10 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR476*003# 0805 R 47 3.0 1.5 10 1500 0.173 0.156 0.069 0.260 0.234 0.104
TPCR226*004# 0805 R 22 4.0 0.9 8 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR336*004# 0805 R 33 4.0 1.3 10 1500 0.173 0.156 0.069 0.260 0.234 0.104
TPCL106M006# 0603 L 10 6.3 0.6 10 4000 0.079 0.071 0.032 0.316 0.285 0.126
TPCR156*006# 0805 R 15 6.3 0.9 8 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR226*006# 0805 R 22 6.3 1.4 10 1500 0.173 0.156 0.069 0.260 0.234 0.104
TPCL335*010# 0603 L 3.3 10.0 0.5 8 5000 0.071 0.064 0.028 0.354 0.318 0.141
TPCL475M010# 0603 L 4.7 10.0 0.5 10 5000 0.071 0.064 0.028 0.354 0.318 0.141
TPCL106M010# 0603 L 10 10.0 1.0 20 4000 0.079 0.071 0.032 0.316 0.285 0.126
TPCR106*010# 0805 R 10 10.0 1.0 8 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR156*010# 0805 R 15 10.0 1.5 10 1500 0.173 0.156 0.069 0.260 0.234 0.104
TPCR106*016# 0805 R 10 16.0 1.6 10 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR105*025# 0805 R 1.0 25.0 0.5 8 3000 0.122 0.110 0.049 0.367 0.331 0.147
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C. Capacitance and DF
are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is
measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
NOTE: AVX reserves the right to supply a higher voltage rating or tighter
tolerance part in the same case size, to the same reliability standards.
The EIA & CECC standards for Low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
