MPLAD30KP14A - MPLAD30KP400CA Available Surface Mount 30,000 Watt Transient Voltage Suppressor High-Reliability screening available in reference to MIL-PRF-19500 DESCRIPTION These high power 30 kW rated transient voltage suppressors in a surface mount package are provided with design features to minimize thermal resistance and cumulative heating. Typical applications include lightning and automotive load dump protection. They are particularly effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design. This efficient low profile package design is offered in standoff voltage selections (V WM ) of 14 volts to 400 volts in either unidirectional or bidirectional construction. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * Available in both unidirectional and bidirectional construction (bidirectional with CA suffix) * High reliability with wafer fabrication and assembly lot traceability * All parts surge tested * Low profile surface mount package * Optional upscreening is available with various screening and conformance inspection options based on MIL-PRF-19500. Refer to Hirel Non-Hermetic Product Portfolio brochure on our web site for more details on the screening options. PLAD (The cathode is the metal base under the body of this device.) * Suppresses transients up to 30,000 W @ 10/1000 s (see Figure 1) * Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B * RoHS compliant versions are available * 3 lot norm screening performed on standby current (I D ) Also available: PLAD15KP (15,000 watts) MPLAD15KP7.0A thru MPLAD15KP200CA APPLICATIONS / BENEFITS * * * * * * * Protection from switching transients and induced RFI Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance: Class 1,2,3,4,5: MPLAD30KP14A to 400CA Class 5: MPLAD30KP14A to 400CA (short distance) Class 5: MPLAD30KP14A to 220CA (long distance) Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance: Class 1,2,3: MPLAD30KP14A to 400CA Class 4: MPLAD30KP14A to 220CA Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance: Class 2: MPLAD30KP10A to 400CA Class 3: MPLAD30KP14A to 220CA Class 4: MPLAD30KP14A to 110CA Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 s @ 25C)*: Level 4: MPLAD30KP14A to 400CA Level 5: MPLAD30KP14A to 260CA Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 s @25C)*: Level 4: MPLAD30KP14A to 64CA Level 5: MPLAD30KP14A to 26CA *See MicroNote 132 for further temperature derating selection. RF01005, Rev G (5/16/14) (c)2013 Microsemi Corporation MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 6 MPLAD30KP14A - MPLAD30KP400CA o MAXIMUM RATINGS @ 25 C unless otherwise specified Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case Peak Pulse Power @ 10/1000 s (2) Value Unit -55 to +150 50 1.0 30,000 C/W C/W C/W W Unidirectional Bidirectional t clamping (0 volts to V (BR) min) Forward Clamping Voltage @ 500 Amps (3) Forward Surge Current Solder Temperature @ 10 s (5) Steady-State Power dissipation Notes: 1. 2. 3. 4. 5. Symbol T J and T STG R JA R JC P PP (3) T A = 25 C T C = 100 C <100 <5 4.0 1500 260 (1) 2.5 (4) 50 V FS I FSM T SP PD ps ns V A C W W When mounted on FR4 PC board with recommended mounting pad (see pad layout). Also see figures 1 and 2. With impulse repetition rate (duty factor) of 0.05% or less. At 8.3 ms half-sine wave (unidirectional devices only). Case temperature controlled on heat sink as specified. See MicroNote 134 for derating P PP when also applying steady-state power. MECHANICAL and PACKAGING * * * * * * * * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating readily solderable per MIL-STD-750, method 2026 MARKING: Body marked with part number POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom) Available in bulk or custom tape-and-reel packaging TAPE-AND-REEL: Standard per EIA-481-B (add "TR" suffix to part number). Consult factory for quantities. WEIGHT: Approximately 1.7 - 2.0 grams See Package Dimensions on last page. PART NOMENCLATURE M PLAD 30K P 14 CA Reliability Level* M MA MX MXL *(see Hirel Non-Hermetic Product Portfolio) (e3) RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Polarity A = Unidirectional CA = Bidirectional Package Designation Reverse Standoff Voltage P PP Rating (W) Plastic SYMBOLS & DEFINITIONS RF01005, Rev G (5/16/14) (c)2013 Microsemi Corporation Page 2 of 6 MPLAD30KP14A - MPLAD30KP400CA Symbol I (BR) ID I PP V (BR) VC V WM V(BR) Definition Breakdown Current: The current used for measuring breakdown voltage V (BR) . Standby Current: The current at the rated standoff voltage V WM . Peak Impulse Current: The peak current during the impulse. Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Clamping Voltage: Clamping voltage at I PP (peak pulse current) at the specified pulse conditions (typically shown as maximum value). Rated Working Standoff Voltage: The maximum peak voltage that can be applied over the operating temperature range. Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by change in temperature. ELECTRICAL CHARACTERISTICS @ 25 C unless otherwise stated MICROSEMI PART NUMBER REVERSE STANDOFF VOLTAGE V WM (Note 1) BREAKDOWN VOLTAGE V (BR) @ I (BR) Volts Volts MAXIMUM CLAMPING VOLTAGE V C @ I PP MAXIMUM STANDBY CURRENT I D @ V WM MAXIMUM PEAK PULSE CURRENT I PP (FIG. 3) MAXIMUM TEMPERATURE COEFFICIENT V(BR) mA Volts A A mV/ C MPLAD30KP14A MPLAD30KP15A MPLAD30KP14CA MPLAD30KP15CA 14 15 15.6 - 17.2 16.7 - 18.5 150 5 24.0 25.8 3000 750 1251* 1164* 10 12 MPLAD30KP16A MPLAD30KP17A MPLAD30KP18A MPLAD30KP20A MPLAD30KP22A MPLAD30KP24A MPLAD30KP26A MPLAD30KP28A MPLAD30KP30A MPLAD30KP33A MPLAD30KP36A MPLAD30KP40A MPLAD30KP43A MPLAD30KP45A MPLAD30KP48A MPLAD30KP51A MPLAD30KP54A MPLAD30KP58A MPLAD30KP60A MPLAD30KP64A MPLAD30KP70A MPLAD30KP75A MPLAD30KP78A MPLAD30KP85A MPLAD30KP90A MPLAD30KP100A MPLAD30KP110A MPLAD30KP120A MPLAD30KP130A MPLAD30KP150A MPLAD30KP160A MPLAD30KP170A MPLAD30KP180A MPLAD30KP200A MPLAD30KP220A MPLAD30KP260A MPLAD30KP280A MPLAD30KP300A MPLAD30KP350A MPLAD30KP400A MPLAD30KP16CA MPLAD30KP17CA MPLAD30KP18CA MPLAD30KP20CA MPLAD30KP22CA MPLAD30KP24CA MPLAD30KP26CA MPLAD30KP28CA MPLAD30KP30CA MPLAD30KP33CA MPLAD30KP36CA MPLAD30KP40CA MPLAD30KP43CA MPLAD30KP45CA MPLAD30KP48CA MPLAD30KP51CA MPLAD30KP54CA MPLAD30KP58CA MPLAD30KP60CA MPLAD30KP64CA MPLAD30KP70CA MPLAD30KP75CA MPLAD30KP78CA MPLAD30KP85CA MPLAD30KP90CA MPLAD30KP100CA MPLAD30KP110CA MPLAD30KP120CA MPLAD30KP130CA MPLAD30KP150CA MPLAD30KP160CA MPLAD30KP170CA MPLAD30KP180CA MPLAD30KP200CA MPLAD30KP220CA MPLAD30KP260CA MPLAD30KP280CA MPLAD30KP300CA MPLAD30KP350CA MPLAD30KP400CA 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 180 200 220 260 280 300 350 400 17.8 - 19.7 18.9 - 20.9 20.0 - 22.1 22.2 - 24.5 24.4 - 26.9 26.7 - 29.5 28.9 - 31.9 31.1 - 34.4 33.3 - 36.8 36.7 - 40.6 40.0 - 44.2 44.4 - 49.1 47.8 - 52.8 50.0 - 55.3 53.3 - 58.9 56.7 - 62.7 60.0 - 66.3 64.4 - 71.2 66.7 - 73.7 71.1 - 78.6 77.8 - 86.0 83.3 - 92.1 86.7 - 95.8 94.4 - 104.0 100 - 111 111 - 123 122 - 135 133 - 147 144 - 159 167 - 185 178 - 197 189 - 209 200 - 221 222 - 245 245 - 271 289 - 320 311 - 345 333 - 369 389 - 431 444 - 492 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 27.2 28.8 30.8 34.0 36.4 39.8 43.0 46.4 48.8 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113 121 126 137 146 162 177 193 209 243 259 275 291 322 356 419 451 483 564 644 450 150 60 45 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1101* 1041* 975 882 822 753 696 645 618 564 516 468 432 414 390 366 342 318 312 294 264 246 240 216 204 186 168 156 142 124 116 110 104 94 84 71 66 62 53 46 12 14 16 18 20 22 24 26 30 35 38 44 50 51 54 58 64 70 72 75 84 90 95 104 109 122 132 145 157 183 195 207 219 243 269 318 344 368 430 490 Unidirectional Bidirectional NOTE 1: Transient Voltage Suppressors are normally selected with reverse standoff voltage V WM , which should be equal to or greater than peak operating voltage. NOTE 2: Items listed in bold above are available ex-stock or with a short lead-time. * Surge Testing is performed to 1000Amps due to Equipment limitations RF01005, Rev G (5/16/14) (c)2013 Microsemi Corporation Page 3 of 6 MPLAD30KP14A - MPLAD30KP400CA PPP Peak Pulse Power -kW GRAPHS tp - Pulse Time - sec IPP Peak Pulse Current - % IPP FIGURE 1 Peak Pulse Power vs. Pulse Time Test waveform parameters: tr = 10 s, tp = 1000 s Figure 2 Pulse Waveform RF01005, Rev G (5/16/14) (c)2013 Microsemi Corporation Page 4 of 6 MPLAD30KP14A - MPLAD30KP400CA PPP Peak Pulse Power -kW GRAPHS (continued) T L Lead Temperature C FIGURE 3 Derating Curve RF01005, Rev G (5/16/14) (c)2013 Microsemi Corporation Page 5 of 6 MPLAD30KP14A - MPLAD30KP400CA PACKAGE DIMENSIONS Ref. A1 A2 B C D F G H J r1 r2 Dimensions Inch Millimeters Min Max Min Max 0.485 0.495 12.32 12.57 0.445 0.455 11.30 11.56 0.145 0.155 3.68 3.94 0.585 0.595 14.86 15.11 0.200 0.210 5.08 5.33 0.008 0.013 0.20 0.33 0.055 0.065 1.40 1.65 0.015 0.025 0.38 0.64 0.062 TYP. 1.57 TYP. 0.030 TYP. 0.76 TYP. 0.045 TYP. 1.14 TYP. PAD LAYOUT Ref. A B C D RF01005, Rev G (5/16/14) Dimensions Millimeters Max Min Max 0.475 11.81 12.07 0.235 5.72 5.97 0.105 2.41 2.67 0.05 1.02 1.27 Inch Min 0.465 0.225 0.095 0.04 (c)2013 Microsemi Corporation Page 6 of 6