1
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
General Purpose
High Power PCB Relays
Power PCB Relay T9E
Coil Data (continued)
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% W
Code D (1W) coil
6 6 4.5 0.6 36 1
9 9 6.75 0.9 81 1
12 12 9 1.2 144 1
18 18 13.5 1.8 324 1
22 22 16.5 2.2 484 1
24 24 18 2.4 576 1
48 48 36.2 4.8 2304 1
110 110 82.5 11 12100 1
Code L (900mW) coil
6 6 4.5 0.6 40 .9
12 12 9 1.2 155 .9
18 18 13.5 1.8 380 .9
24 24 18 2.4 660 .9
All figures are given for coil without preenergization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts 1500Vrms
between contact and coil 2500Vrms
Initial surge withstand voltage
between contact and coil 6kV (1.2μs/50μs impulse wave)
Initial insulation resistance
between insulated elements 1x109
Clearance/creepage
between contact and coil ≥3mm/4mm
Coil operating ranges shown above are for 1W coils.
n 1 pole 30A, 1 formA(NO) or 1 formC(CO)
n High breaking capacity 7500 VA
n PCB and PCB/quick connect terminals
n UL class F insulation as standard
n Ambient temperature up to 105°C
n Plastic materials according to IEC60335-1
Typical applications
HVAC, power supplies, domestic appliances, measurement and control.
Approvals
VDE 40027903, UL E58304
Technical data of approved types on request.
Contact Data
Contact arrangement
1 form A (NO) 1 form C (CO)
Rated voltage 240VAC
Max. switching voltage 250VAC (VDE); 300VAC (UL)
Rated current 30A 20A/10A
Limiting continuous current 30A
Breaking capacity max. 7500VA 5000/2500VA
Contact material AgSnOInO (AgCdO optional)
Min. recommended contact load 1A, 5VDC or 12VAC
Initial contact resistance 75 mΩ at 1A at 5VDC or 12VAC
Frequency of operation, with/without load 6/120min-1
Operate/release time max., including bounce 15/15ms
Contact ratings
Type Contact Load Cycles
IEC 61810
AgSnOInO, 1W coil
1 NO 30A, 250VAC, cosj=1, 60°C 20x103
1 NO 20A, 250VAC, cosj=1, 85°C 100x103
2 NO 20A, 250VAC, cosj=1, 70°C 100x103
1, 2 CO 20A / 10A, 250VAC, cosj=1, 60°C 20x103
AgSnOInO, 900mW coil
1 NO 17A, 250VAC, cosj=1, 105°C 100x103
1 NO 20A, 250VAC, cosj=1, 85°C 100x103
EN 60730-1
AgSnOInO, 1W coil
1 NO 12(12)A, 240VAC, 60°C 100x103
UL 508 1)
AgSnOInO, 1W coil
1, 2 NO 30A, 240VAC, general purpose, 25°C 100x103
AgSnOInO, 900mW coil
1, 2 NO TV-8, 125VAC, 25°C 25x103
1) Additional UL 508 ratings are available.
Mechanical endurance 10x106 ops.
Coil Data
Coil voltage range 6 to 110VDC
Max. coil power 110% of nominal
Max. coil temperature 155°C
Coil insulation system according UL Class F
2
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
General Purpose
High Power PCB Relays
Power PCB Relay T9E (Continued)
Potter & Brumfield
Other Data (Continued)
Terminal type PCB-tht and PCB-tht + quick
connect
Weight 26g mounting code 1
33g mounting codes 2 and 5
Resistance to soldering heat THT
IEC 60068-2-20 260°C
Packaging/unit tray/50 pcs., box/250 pcs.
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil -40ºC to 85ºC / 105°C
Category of environmental protection
IEC 61810 RTII - flux proof (T9EV)
RTIII - wash tight (T9ES)
Vibration resistance (functional) 1.5mm, 10-55 Hz
Shock resistance (functional) 10g for 11msec
Shock resistance (destructive) 100g
Dimensions
PCB version PCB/quick connect version
Terminal assignment
Bottom view on pins
1 form A 1 form C
PCB layout
Bottom view on pins
PCB version PCB/quick connect version
S0289-A
27,4 MAX.
3,3
32,5 MAX.
+,41
–,25
S0290-A
27,4 MAX.
32,5 MAX.
S0261-AH
S0261-AA
Only necessary terminals are
present on single throw models.
Consequently, some holes will
be unnecessary for single throw
models.
Only necessary terminals are
present on single throw models.
Consequently, some holes will
be unnecessary for single throw
models.
3
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
General Purpose
High Power PCB Relays
Power PCB Relay T9E (Continued)
Potter & Brumfield
Product code structure Typical product code T9E S 1 D 1 4 -24
Type
T9E Power PCB relay T9E
Enclosure
S Wash-tight plastic case with knock off nib
V Flux-proof plastic case
Contact arrangement
1 1 form A (1 NO) 5 1 form C (1 CO)
Coil Input
D DC voltage, 1W L DC voltage, 900mW
Mounting and termination
1 PCB mounting; PCB terminals for coil and contacts
2 PCB mounting; PCB terminals for coil and contacts; 6.35mm (.250in) QC for contacts
Contact material
4 AgSnOInO
2 AgCdO – optionally available. Contact Product Engineering for availbaility and ratings.
Coil voltage
Coil code: please refer to coil versions table
Product Code Enclosure Mounting Contact material Contacts Coil version Coil voltage Part number
T9ES1L14-18 wash tight PCB terminals AgSnOInO 1 form A, 1 NO 900mW 18VDC 1-2027234-8
T9ES1D14-12 1W 12VDC 2027234-2
T9ES1D14-24 24VDC 2027234-7
T9ES1D12-12 AgCdO 12VDC 1-2027234-0
T9ES1D24-12 PCB + quick connect AgSnOInO 12VDC 2027234-8
T9ES1D22-12 AgCdO 12VDC 1-2027243-3
T9ES5D14-12 PCB terminals AgSnOInO 1 form C, 1 CO 12VDC 2027234-6
T9ES5D12-24 AgCdO 24VDC 2027234-4
T9ES5D24-12 PCB + quick connect AgSnOInO 12VDC 2027234-9
T9EV1D14-22 flux proof PCB terminals 1 form A, 1 NO 22VDC 2027234-5