fiber-optic sensorsAAAAAAAAAAAAAA© SICK AG. Subject to change without notice.AAAAAAAAAAAAAA4/3/2013 3:17:16 PM
1) 5) Sensing range with 8 ms response time. Scanning range reduction with shorter response time (see tables LL3/WLL180T) 2) 6) LL3-TX01 3) Objects to be sensed
with 90% reflectivity (based on DIN 5033 white standard). sensing distance with 8 ms response time. sensing distance reduction with shorter response time (see tables
LL3/WLL180T) 4) LL3-DK06 7) Average service life 100,000 h at Ta = +25 °C
1) With correctly attached fibre-optic cable LL3 and closed protection hood 2) +- 10% 3) May not exceed or fall short of VS
4) Without load 5) Selectable 6) A = VS
connections reverse-polarity protected 7) B = inputs and output reverse-polarity protected 8) C = interference suppression 9) D = outputs overcurrent and short-circuit
protected 10) See LL3 fiber-optic data
Delay time: Programmable: 0 ... 9,999 ms
Indication: Display
Sensor/detection principle: Fiber-optic photoelectric sensor
Housing design (light emission): Rectangular
Display: LED status display ∕ 2x 4-character digital dual displays, Set value (green
indicator) and actual value (red indicator) are displayed simultaneously,
display of parameters
Mechanics/electronics
Enclosure rating: IP 50 1)
Supply voltage: 12 V DC ... 24 V DC 2)
Ripple: ≤ 10 % 3)
Power consumption: ≤ 50 mA 4)
Switching output: PNP, Light/dark-switching, manually selectable, open collector
Output current Imax.: ≤ 100 mA
Response time: ≤ 2 ms
≤ 8 ms
≤ 16 µs
≤ 70 µs
≤ 250 µs 5)
Switching frequency: 31.2 kHz
7.1 kHz
2 kHz
250 Hz
62.5 Hz
Connection type: Connector M8, 4-pin
Protection class: III
Circuit protection:::: A, B, C, D 6) 7) 8) 9)
Special device: 0
Housing material: ABS/PC
Ambient operating temperature: -25 °C ... 55 °C
Ambient storage temperature: -40 °C ... 70 °C
Angle of dispersion: Ca. 65 ° 10)