NTMFS4C05N Power MOSFET 30 V, 78 A, Single N-Channel, SO-8 FL Features * * * * Low RDS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant http://onsemi.com V(BR)DSS Applications 30 V 78 A 5.0 mW @ 4.5 V MAXIMUM RATINGS (TJ = 25C unless otherwise stated) Parameter Drain-to-Source Voltage Gate-to-Source Voltage D (5-8) Symbol Value Unit VDSS 30 V VGS 20 V ID 21.7 A Continuous Drain Current RqJA (Note 1) TA = 25C Power Dissipation RqJA (Note 1) TA = 25C PD 2.57 W Continuous Drain Current RqJA 10 s (Note 1) TA = 25C ID 34.8 A Power Dissipation RqJA 10 s (Note 1) TA = 25C Continuous Drain Current RqJA (Note 2) TA = 80C TA = 80C TA = 25C S (1,2,3) PD ID 6.6 11.9 8.9 1 0.77 W Continuous Drain Current RqJC (Note 1) TC = 25C ID 78 A Power Dissipation RqJC (Note 1) TC = 25C PD 33 W TA = 25C, tp = 10 ms IDM 174 A IDmax 80 A TJ, TSTG -55 to +150 C IS 30 A Drain to Source dV/dt dV/dt 7.0 V/ns Single Pulse Drain-to-Source Avalanche Energy (TJ = 25C, VGS = 20 V, IL = 41 Apk, L = 0.1 mH, RGS = 25 W) (Note 3) EAS 84 mJ TL 260 C TC =80C Source Current (Body Diode) Lead Temperature for Soldering Purposes (1/8 from case for 10 s) September, 2014 - Rev. 5 D 4C05N AYWZZ D D DFN5 5x6 (SO-8 FLAT LEAD) CASE 506CX 58 A Y W ZZ 1 4C05N AAYWZZ = Assembly Location = Year = Work Week = Lot Traceabililty ORDERING INFORMATION Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Surface-mounted on FR4 board using 1 sq-in pad, 1 oz Cu. 2. Surface-mounted on FR4 board using the minimum recommended pad size. 3. This is the absolute maximum ratings. Parts are 100% tested at TJ = 25C, VGS = 20 V, IL = 29 A, EAS = 42 mJ. (c) Semiconductor Components Industries, LLC, 2014 D S SO-8 FLAT LEAD S CASE 488AA S STYLE 1 G A PD Operating Junction and Storage Temperature MARKING DIAGRAMS W TA = 25C TA = 25C N-CHANNEL MOSFET 26.0 TA = 80C Current Limited by Package G (4) 16.3 Power Dissipation RqJA (Note 2) Pulsed Drain Current ID MAX 3.4 mW @ 10 V * CPU Power Delivery * DC-DC Converters Steady State RDS(ON) MAX 1 Device Package Shipping NTMFS4C05NT1G SO-8 FL (Pb-Free) 1500 / Tape & Reel NTMFS4C05NT3G SO-8 FL (Pb-Free) 5000 / Tape & Reel NTMFS4C05NT1G-001 SO-8 FL (Pb-Free) 1500 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: NTMFS4C05N/D NTMFS4C05N THERMAL RESISTANCE MAXIMUM RATINGS Symbol Value Junction-to-Case (Drain) Parameter RqJC 3.8 Junction-to-Ambient - Steady State (Note 4) RqJA 48.6 Junction-to-Ambient - Steady State (Note 5) RqJA 161.7 Junction-to-Ambient - (t 10 s) (Note 4) RqJA 19 Unit C/W 4. Surface-mounted on FR4 board using 1 sq-in pad, 1 oz Cu. 5. Surface-mounted on FR4 board using the minimum recommended pad size. ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Typ Max Unit OFF CHARACTERISTICS Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 30 Drain-to-Source Breakdown Voltage (transient) V(BR)DSSt VGS = 0 V, ID(aval) = 12.6 A, Tcase = 25C, ttransient = 100 ns 34 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Zero Gate Voltage Drain Current Gate-to-Source Leakage Current IDSS V V 12 VGS = 0 V, VDS = 24 V mV/C TJ = 25C 1.0 TJ = 125C 10 IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 250 mA mA 100 nA 2.2 V ON CHARACTERISTICS (Note 6) Gate Threshold Voltage Negative Threshold Temperature Coefficient Drain-to-Source On Resistance 1.3 VGS(TH)/TJ RDS(on) 5.1 mV/C VGS = 10 V ID = 30 A 2.7 3.4 VGS = 4.5 V ID = 30 A 4.0 5.0 Forward Transconductance gFS VDS = 1.5 V, ID = 15 A Gate Resistance RG TA = 25C 68 0.3 1.0 mW S 2.0 W CHARGES AND CAPACITANCES Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 1972 VGS = 0 V, f = 1 MHz, VDS = 15 V 1215 pF 59 Capacitance Ratio CRSS/CISS Total Gate Charge QG(TOT) 14 Threshold Gate Charge QG(TH) 3.3 Gate-to-Source Charge QGS Gate-to-Drain Charge QGD 5.0 Gate Plateau Voltage VGP 3.1 V 30 nC Total Gate Charge VGS = 0 V, VDS = 15 V, f = 1 MHz VGS = 4.5 V, VDS = 15 V; ID = 30 A QG(TOT) VGS = 10 V, VDS = 15 V; ID = 30 A 0.030 6.0 nC SWITCHING CHARACTERISTICS (Note 7) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(ON) 11 tr td(OFF) VGS = 4.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 W tf 32 21 7.0 http://onsemi.com 2 ns NTMFS4C05N ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Typ Max Unit SWITCHING CHARACTERISTICS (Note 7) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(ON) 8.0 tr td(OFF) VGS = 10 V, VDS = 15 V, ID = 15 A, RG = 3.0 W tf 26 ns 26 5.0 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25C 0.77 TJ = 125C 0.62 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 10 A 1.1 V 40.2 VGS = 0 V, dIS/dt = 100 A/ms, IS = 30 A QRR 20.3 ns 19.9 30.2 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 6. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 7. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 3 NTMFS4C05N 0.028 0.026 0.024 0.022 0.020 0.018 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 3.0 TJ = 25C 3.8 V 3.6 V 4 V to 6.5 V ID, DRAIN CURRENT (A) 140 130 10 V 120 110 100 90 80 70 60 50 40 30 20 10 0 0 3.4 V 3.2 V 3.0 V 2.8 V 2.6 V 1 2 3 5 4 140 130 VDS = 5 V 120 110 100 90 80 70 60 50 40 30 20 10 0 0 0.5 1.0 2.0 2.5 3.0 3.5 4.0 Figure 2. Transfer Characteristics ID = 30 A TJ = 25C 4.0 5.0 6.0 7.0 8.0 9.0 10 4.5 0.008 TJ = 25C 0.007 0.006 0.005 VGS = 4.5 V 0.004 VGS = 10 V 0.003 0.002 10 20 30 40 50 60 70 ID, DRAIN CURRENT (A) Figure 4. On-Resistance vs. Drain Current and Gate Voltage 10000 1.7 VGS = 0 V ID = 30 A VGS = 10 V TJ = 150C IDSS, LEAKAGE (nA) RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) TJ = -55C 1.5 Figure 1. On-Region Characteristics Figure 3. On-Resistance vs. VGS 1.5 TJ = 25C VGS, GATE-TO-SOURCE VOLTAGE (V) VGS, GATE-TO-SOURCE VOLTAGE (V) 1.6 TJ = 125C VDS, DRAIN-TO-SOURCE VOLTAGE (V) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) ID, DRAIN CURRENT (A) TYPICAL CHARACTERISTICS 1.4 1.3 1.2 1.1 1.0 1000 TJ = 125C 100 TJ = 85C 0.9 0.8 0.7 -50 10 -25 0 25 50 75 100 125 150 5 10 15 20 25 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage http://onsemi.com 4 30 NTMFS4C05N TYPICAL CHARACTERISTICS VGS = 0 V TJ = 25C 2750 2500 C, CAPACITANCE (pF) VGS, GATE-TO-SOURCE VOLTAGE (V) 3000 2250 Ciss 2000 1750 1500 1250 1000 Coss 750 500 250 0 Crss 0 5 10 15 20 25 30 QT 8 6 4 Qgd Qgs TJ = 25C VDD = 15 V VGS = 10 V ID = 30 A 2 0 0 4 8 12 16 24 28 Qg, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate-to-Source and Drain-to-Source Voltage vs. Total Charge 32 20 VDD = 15 V ID = 15 A VGS = 10 V IS, SOURCE CURRENT (A) 18 td(off) td(on) 100 tr tf 10 VGS = 0 V 16 14 12 10 8 6 4 TJ = 125C TJ = 25C 2 1 1 10 0.7 0.8 0.9 1.0 Figure 10. Diode Forward Voltage vs. Current 10 ms 1 ms 10 ms 0 V < VGS < 10 V Single Pulse TC = 25C RDS(on) Limit Thermal Limit Package Limit 0.1 dc 1 10 EAS, SINGLE PULSE DRAIN-TO- SOURCE AVALANCHE ENERGY (mJ) Figure 9. Resistive Switching Time Variation vs. Gate Resistance 10 0.01 0.01 0.6 VSD, SOURCE-TO-DRAIN VOLTAGE (V) 100 ms 0.1 0.5 RG, GATE RESISTANCE (W) 100 1 0 0.4 100 1000 ID, DRAIN CURRENT (A) 20 VDS, DRAIN-TO-SOURCE VOLTAGE (V) 1000 t, TIME (ns) 10 100 45 ID = 29 A 40 35 30 25 20 15 10 5 0 25 50 75 100 125 VDS, DRAIN-TO-SOURCE VOLTAGE (V) TJ, STARTING JUNCTION TEMPERATURE (C) Figure 11. Maximum Rated Forward Biased Safe Operating Area Figure 12. Maximum Avalanche Energy vs. Starting Junction Temperature http://onsemi.com 5 150 NTMFS4C05N TYPICAL CHARACTERISTICS 100 Duty Cycle = 50% R(t) (C/W) 10 1 20% 10% 5% 2% 1% 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.1 0.01 1 10 100 1000 PULSE TIME (sec) Figure 13. Thermal Response 100 120 ID, DRAIN CURRENT (A) 100 GFS (S) 80 60 40 20 0 0 10 20 30 40 50 60 70 TA = 25C 1 1.E-07 80 TA = 85C 10 1.E-06 1.E-05 1.E-04 ID (A) PULSE WIDTH (SECONDS) Figure 14. GFS vs. ID Figure 15. Avalanche Characteristics http://onsemi.com 6 1.E-03 NTMFS4C05N PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO-8FL) CASE 488AA ISSUE L 2X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 0.20 C D A 2 B D1 2X 0.20 C 4X E1 2 q E c 1 2 3 DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q A1 4 TOP VIEW 0.10 C 8X C e SEATING PLANE DETAIL A A 0.10 C SIDE VIEW 3X DETAIL A STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN RECOMMENDED SOLDERING FOOTPRINT* 2X 0.495 b 0.10 C A B 0.05 c MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 --- 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.00 5.30 5.15 4.70 4.90 5.10 3.80 4.00 4.20 6.15 6.00 6.30 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.61 0.71 1.20 1.35 1.50 0.51 0.61 0.71 0.125 REF 3.00 3.40 3.80 0_ --- 12 _ 4.560 2X 1.530 e/2 L 1 4 3.200 K 4.530 E2 PIN 5 (EXPOSED PAD) L1 M 1.330 2X 0.905 1 G 0.965 D2 4X 1.000 4X 0.750 BOTTOM VIEW 1.270 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 7 NTMFS4C05N PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO-8FL) CASE 506CX ISSUE O 2X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 0.15 C D A 3 B D1 0.30 C EEE EEE EEE PIN 1 IDENTIFIER 2X E1 E 3 MILLIMETERS MIN MAX 0.90 1.00 0.30 0.50 0.11 0.22 5.30 BSC 4.80 5.20 4.05 4.45 6.00 BSC 4.80 5.20 3.30 3.70 1.27 BSC 0.70 0.90 0.90 1.30 0.50 0.70 DIM A b c D D1 D2 E E1 E2 e G K L TOP VIEW A 0.10 C SOLDERING FOOTPRINT* 0.05 C c C SIDE VIEW SEATING PLANE 8X e/2 e 1 4X 2.10 b 0.10 C A B 4.74 2X 0.05 C 4 5.46 2X 0.43 6.59 0.79 K L 1 4X E2 4X 1.15 G 4X 0.75 1.27 PITCH *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. D2 BOTTOM VIEW ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 8 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTMFS4C05N/D