OMA160 Single Pole OptoMOS(R) Relay Load Voltage Load Current Max RON OMA160 250 50 100 Description OMA160 is a 250V, 50mA, 100 1-Form-A relay. It features high speed switching capability. Units V mA Features * Small 6 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified: * BS EN 60950:1992 (BS7002:1992) Certificate #:7344 * BS EN 41003:1993 Certificate #:7344 Ordering Information Part # OMA160 OMA160S OMA160STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration OMA160 Pinout OMA160 Pinout AC/DC Configuration DC Only Configuration + Control - Control Do Not Use 1 6 2 5 3 4 Load + Control Do Not Use - Control Load Do Not Use 5 3 4 + Load - Load 10ms CONTROL +90% TON www.clare.com 6 2 Switching Characteristics of Normally Open (Form A) Devices LOAD 10%+ DS-OMA160-R6 1 10%+ TOFF 1 OMA160 Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/C 2 Derate Linearly 6.67 mw/C Min - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW 3750 -40 -40 - VRMS +85 C +125 C - - +260 +220 C C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance Input to Output Isolation 2 Conditions Symbol Min Typ Max Units - VL - - 250 V 10ms IL IL - - 50 80 100 mA mA mA 50 15 - 100 30 25 nA ILPK IL=50mA IL=80mA VL=250V ILEAK - IF=10mA,VL=10V IF=10mA,VL=10V 50V, f=1MHz TON TOFF COUT - 5 0.125 0.125 - ms ms pF - - - 3 - pF IL=50mA IF=10mA VR=5V IF IF VF VR IR 10 0.4 0.9 - 0.7 1.2 - 50 1.4 5 10 mA mA V V A - CI/O VI/O 3750 3 - - pF VRMS RON www.clare.com Rev. 6 OMA160 PERFORMANCE DATA* OMA160 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 50mADC; IF = 10mADC) 35 Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 1.17 1.19 1.21 1.23 43.5 44.5 45.5 46.5 10 47.5 367.5 30 20 20 25 10 5 Device Count (N) 25 15 15 10 5 2.075 2.525 2.975 3.425 2.075 Load Current (mA) 20 15 10 5 0 0.012 0.017 0.022 0.027 0.032 0.037 Turn-On (ms) 390 385 380 375 0.07 -20 0 20 40 60 80 100 0.13 0.15 OMA160 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 0.014 0.010 0.008 0.006 0.004 0 -40 120 0 20 40 60 80 100 OMA160 Typical Turn-On vs. Temperature (Load Current = 50mADC) OMA160 Typical Turn-Off vs. Temperature (Load Current = 50mADC) 10mA -40 -20 Temperature (C) 0.50 0.25 100 0.11 Temperature (C) 0.75 365 80 0.09 Turn-On (ms) 1.00 370 60 0.05 Turn-Off (ms) 1.25 40 3.875 0 1.50 20 10 0.002 395 Temperature (C) 3.425 30mA 20mA 10mA 400 0 15 0.012 -40 OMA160 Typical Blocking Voltage vs. Temperature -20 2.975 100 90 80 70 60 50 40 30 20 10 0 Turn-Off (ms) -40 2.525 OMA160 Typical Load Current vs. Temperature 25 402.5 20 LED Current (mA) LED Current (mA) OMA160 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 50mADC; IF = 10mADC) 395.5 0 1.625 3.875 388.5 5 0 0 381.5 OMA160 Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 50mADC; IF = 10mADC) 25 1.625 374.5 Blocking Voltage (V) OMA160 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 50mADC ) Device Count (N) Device Count (N) 15 On-Resistance () OMA160 Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 50mADC) Device Count (N) 20 0 42.5 1.25 LED Forward Voltage Drop (V) Blocking Voltage (VRMS) 25 5 0 0 Leakage (A) Device Count (N) 30 OMA160 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) Device Count (N) OMA160 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 10mADC -20 0 20 40 60 20mA 80 100 Temperature (C) 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 10mA -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 6 www.clare.com 3 OMA160 PERFORMANCE DATA* OMA160 Typical Turn-On vs. LED Forward Current (Load Current = 50mADC) 1.8 0.040 0.16 1.6 0.035 50mA 30mA 20mA 10mA 5mA 1.2 1.0 Turn-Off (ms) 0.14 1.4 0.12 0.10 0.08 0.06 0.04 0.025 0.020 0 -20 0 20 40 60 80 100 0.015 0 120 5 10 LED Current (mA) 60 50 40 30 20 10 0 0 20 40 60 30 35 40 45 50 0 5 10 80 -40 100 -20 0 20 40 20 25 30 35 40 45 50 OMA160 Typical IF for Switch Dropout vs. Temperature 60 80 100 Temperature (C) OMA160 Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 10mADC 15 LED Forward Current (mA) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 Temperature (C) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 Temperature (C) OMA160 Energy Rating Curve 0.45 0.40 Load Current (A) 50 40 30 20 10 0 -10 -20 -30 -40 -50 25 LED Current (mA) 70 -20 20 OMA160 Typical IF for Switch Operation vs. Temperature (Load Current = 50mADC) OMA160 Typical On-Resistance vs. Temperature (Load Current = 50mADC; IF = mADC) -40 15 LED Forward Current (mA) Temperature (C) On-Resistance () 0.030 0.02 0.8 -40 Load Current (mA) OMA160 Typical Turn-Off vs. LED Forward Current (Load Current = 50mADC) 0.18 Turn-On (ms) LED Forward Voltage Drop (V) OMA160 Typical LED Forward Voltage Drop (V) vs. Temperature 0.35 0.30 0.25 0.20 0.15 0.10 0.05 -3 -2 -1 0 1 Load Voltage (V) 2 3 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 6 OMA160 MECHANICAL DIMENSIONS 8.382 .635 (.330 .025) 6 Pin DIP Through Hole (Standard) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 6.350 .127 (.250 .005) 9.144 .508 (.360 .020) 2.540 .127 (.100 .005) 6-.800 DIA. (6-.031 DIA.) 7.620 .127 (.300 .005) 6.350 .127 (.250 .005) 9.144 (.360) 5.080 .127 (.200 .005) .457 .076 (.018 .003) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 6 12.090 (.476) 10.100 (.398) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 .305 (.630 .012) .050R TYP. 11.989 .102 (.472 .004) 10.100 .102 (.398 .004) 1.549 .102 (.061 .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. 6 www.clare.com 5 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-OMA160-R6.0 (c)Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 6/25/02