https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page1/15
Feed-through terminal block-RTO 5-TC BU-3049851
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Feed-through terminal block with bolt connection technology and transparent safety contact hood, cross section:
0.1 - 6 mm², AWG: 26 - 10, width 16.3 mm, color: blue
The figure shows a version of the
article
Product Features
Four bridge shafts per terminal block
Terminal point always freely accessible
Key commercial data
Packing unit 1 1
Minimum order quantity 50 1
Weight per Piece (excluding packing) 33.04 GRM
Custom tariff number 85369010
Country of origin China
Technical data
General
Note Note: the BE-RT... path extension is to be used for non-insulated cable
lugs (see accessories).
Number of levels 1
Number of connections 2
Color blue
Insulating material PA
Inflammability class according to UL 94 V0
Maximum load current 41 A (with 6 mm² conductor cross section)
Rated surge voltage 8 kV
Pollution degree 3
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page2/15
Feed-through terminal block-RTO 5-TC BU-3049851
Technical data
General
Surge voltage category III
Insulating material group I
Connection in acc. with standard IEC 60947-7-1
Nominal current IN41 A
Nominal voltage UN1000 V
Open side panel ja
Dimensions
Width 16.3 mm
Length 66 mm
Height NS 35/7,5 51 mm
Height NS 35/15 58.5 mm
Connection data
Note Connection bolts
Conductor cross section solid min. 0.1 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section AWG/kcmil min. 26
Conductor cross section AWG/kcmil max 10
Conductor cross section stranded min. 0.1 mm²
Conductor cross section stranded max. 6 mm²
Min. AWG conductor cross section, stranded 26
Max. AWG conductor cross section, stranded 10
Min. cross section for cable lug connection 0.5 mm²
Max. cross section for cable lug connection 6 mm²
Connection method Bolt connection
Screw thread M5
Tightening torque, min 2.5 Nm
Tightening torque max 3 Nm
Classifications
eCl@ss
eCl@ss 4.0 27141120
eCl@ss 4.1 27141120
eCl@ss 5.0 27141120
eCl@ss 5.1 27141120
eCl@ss 6.0 27141120
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page3/15
Feed-through terminal block-RTO 5-TC BU-3049851
Classifications
eCl@ss
eCl@ss 7.0 27141120
eCl@ss 8.0 27141120
ETIM
ETIM 2.0 EC000897
ETIM 3.0 EC000897
ETIM 4.0 EC000897
ETIM 5.0 EC000897
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
Approvals
Approvals
Approvals
GOST / ABS / GOST
Ex Approvals
Approvals submitted
Approval details
GOST
ABS
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page4/15
Feed-through terminal block-RTO 5-TC BU-3049851
Approvals
GOST
Accessories
Accessories
Bridge
Plug-in bridge-FBS 2-8-3030284
Plug-in bridge, Number of positions:2, Color:red
Plug-in bridge-FBS 3-8-3030297
Plug-in bridge, Number of positions:3, Color:red
Plug-in bridge-FBS 4-8-3030307
Plug-in bridge, Number of positions:4, Color:red
Plug-in bridge-FBS 5-8-3030310
Plug-in bridge, Number of positions:5, Color:red
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page5/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
Plug-in bridge-FBS 10-8-3030323
Plug-in bridge, Number of positions:10, Color:red
Plug-in bridge-FBSRH 2-8-3033802
Plug-in bridge, Number of positions:2, Color:red
Plug-in bridge-FBSRH 3-8-3033803
Plug-in bridge, Number of positions:3, Color:red
Plug-in bridge-FBSRH 4-8-3033804
Plug-in bridge, Number of positions:4, Color:red
End block
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page6/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
End clamp-CLIPFIX 35-5-3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp-E/NS 35 N-0800886
End clamp, width: 9.5 mm, color: gray
End clamp-E/UK-1201442
End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail
End clamp-E/UK 1-1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover-D-RT 5-T-3049291
End cover, Length:91.4 mm, Width:2.2 mm, Color:gray
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page7/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
Path extension-BE-RT 3/5-3049819
Path extension, Color:gray
Spacer plate-DP PS-8-3036741
Spacer plate, Color:red
Insulating sleeve
Insulating sleeve-MPS-IH WH-0201663
Insulating sleeve, Color:white
Insulating sleeve-MPS-IH RD-0201676
Insulating sleeve, Color:red
Insulating sleeve-MPS-IH BU-0201689
Insulating sleeve, Color:blue
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page8/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
Insulating sleeve-MPS-IH YE-0201692
Insulating sleeve, Color:yellow
Insulating sleeve-MPS-IH GN-0201702
Insulating sleeve, Color:green
Insulating sleeve-MPS-IH GY-0201728
Insulating sleeve, Color:gray
Insulating sleeve-MPS-IH BK-0201731
Insulating sleeve, Color:black
Labeled terminal marker
Zack marker strip-ZB 16 CUS-0827463
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page9/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
Marker for terminal blocks-UC-TM 16 CUS-0824621
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 16 mm, Lettering field: 15.45 x 10.5 mm
Marker for terminal blocks-UCT-TM 16 CUS-0829637
Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting
type: Snap into tall marker groove, For terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm
Zack marker strip-ZB 16,3 CUS-0824946
Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into
tall marker groove, For terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm
Mounting rail
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page10/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
DIN rail-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail 35 mm (NS 35)
DIN rail-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Width:35 mm, Height:7.5 mm, Length:2000 mm, Color:silver
DIN rail-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page11/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
DIN rail-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail-NS 35/15 UNPERF 2000MM-1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail-NS 35/15 WH PERF 2000MM-0806602
DIN rail 35 mm (NS 35)
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page12/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
DIN rail-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail-NS 35/15 ZN PERF 2000MM-1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page13/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Partition plate
Separating plate-TPNS-UK-0706647
Separating plate, Length:80 mm, Width:2 mm, Height:70 mm, Color:gray
Socket spanner
Tool-SHN 8-1209868
Socket wrench, wrench size 8 mm
Terminal marking
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page14/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
Zack marker strip-ZB 16:UNPRINTED-0827461
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 16 mm, Lettering field: 16 x 10.5 mm
Marker for terminal blocks-UC-TM 16-0819217
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, For terminal block width: 16 mm, Lettering field: 15.45 x 10.5 mm
Marker for terminal blocks-UCT-TM 16-0829146
Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 16
mm, Lettering field: 14.8 x 9.6 mm
Zack marker strip-ZB 16,3:UNPRINTED-0820222
Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For
terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm
Test plug terminal block
Test plugs-MPS-MT-0201744
Test plugs, Color:silver
https://www.phoenixcontact.com/us/products/3049851
19.11.2013Page15/15
Feed-through terminal block-RTO 5-TC BU-3049851
Accessories
Test adapter-PAI-4-N GY-3032871
Test adapter, Color:gray
Test adapter-PS-8-3031005
Test adapter, Color:red
Test adapter-PS-8/2,3MM RD-3048564
Test adapter, Color:red
Drawings
Circuit diagram
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com