LV77D Series 2.5 V LVDS Clock Oscillators January 2010 * Pletronics' LV77D Series is a quartz crystal controlled precision square wave generator with an LVDS output. * The package is designed for high density surface mount designs. * Low cost mass produced oscillator. * Tape and Reel or cut tape packaging is available. * 5 x 7 mm LCC Ceramic Package * Enable/Disable Function on pad 1 * Disable function includes low standby power mode * Low Jitter <= 80MHz there are only limited frequencies available (others are long lead times) 25.00MHz 40.00MHz 50.00MHz 53.125MHz 62.50MHz 74.175824MHz 74.25MHz 80.00MHz Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB's, PBDE's Weight of the Device: 0.16 grams Moisture Sensitivity Level: 1 As defined in J-STD-020D.1 Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter Unit VCC Supply Voltage -0.5V to +5.0V Vi Input Voltage -0.5V to VCC + 0.5V Vo Output Voltage -0.5V to VCC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms Inc. to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright (c) 2006, 2007, 2010 Pletronics LV77D Series 2.5 V LVDS Clock Oscillators January 2010 Part Number: LV77 45 D E W -125.0M -XX Part Marking: PLE LV77 FF.FFF M C YMDXX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel or Frequency in MHz LV7XYWWXX FF.FFF M C PLE XXX Supply Voltage VCC W = 2.5V _ + 10% Optional Enhanced OTR Blank = Temp. range -10 to +70oC E = Temp. range -40 to +85oC Series Model Frequency Stability 45 = + _ 50 ppm 44 = + _ 25 ppm 20 = + _ 20 ppm Series Model Marking Legend: PLE = Pletronics FF.FFF M = Frequency in MHz YYWW or YWW or YMD = Date of Manufacture (year and week, or year-month-day) All other marking is internal factory codes Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from the marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code Year 6 2006 Code A JAN Month Code Day Code Day Code Day 7 2007 8 2008 B FEB 9 2009 C MAR D APR E MAY 0 2010 F JUN 1 2011 2 2012 G JUL H AUG J SEP K OCT L NOV M DEC 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 A 10 B 11 C 12 D 13 E 14 F 15 G 16 H 17 J 18 K 19 L 20 M 21 N 22 P 23 R 24 T 25 U 26 V 27 W 28 X 29 Y 30 Z 31 www.pletronics.com 425-776-1880 2 LV77D Series 2.5 V LVDS Clock Oscillators January 2010 Electrical Specification for 2.50V _ +10% over the specified temperature range and the frequency range of 1 to 250 MHz Item Min Max Unit Condition Frequency Accuracy "45" -50 +50 ppm "44" -25 +25 For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures "20" -20 +20 See load circuit Output Waveform LVDS Output High Level -- 1.60 Volts Output Low Level 0.90 -- Volts Differential Output (VOD) 250 450 mVolts -- 50 mVolts 1.125 1.375 Volts > 80 MHz 1.125 1.500 Volts < 80 MHz Output Symmetry 45 55 % Referenced to 50% of amplitude or crossing point Output TRISE and TFALL 300 700 pS Vth is 20% and 80% of waveform > 80 MHz 400 900 pS Vth is 20% and 80% of waveform < 80 MHz - 0.6 pS RMS - 2.8 - 63 mA > 80 MHz - 40 mA < 80 MHz 50 - Kohm To Vcc (equivalent resistance) V disable - 0.4 Volts Referenced to Ground V enable 2.0 - Volts -10 +10 uA -10 +10 uA Enable - 10 nS Time for output to reach a logic state Disable time - 10 nS Time for output to reach a high Z state Start up time - 5 mS > 80 MHz - 3 mS < 80 MHz -10 +70 o Standard Temperature Range +85 o Extended Temperature Range -55 +125 o - 3 uA Pad 1 low, device disabled > 80 MHz - 1.5 mA Pad 1 low, device disabled < 80 MHz Differential Output Error (dVOS) Output Offset Voltage (VOS) Jitter Vcc Supply Current Enable/Disable Internal Pull-up Output leakage VOUT = VCC VOUT = 0V Operating Temperature Range -40 Storage Temperature Range Standby Current ICC R1 = 50 ohms See load circuit R1 = 50 ohms Measured from 12KHz to 20MHz from Fnominal Measured from 10Hz to 1MHz from Fnominal C C Includes current of properly terminated device Pad 1 low, device disabled Measured from the time Vcc = 2.2V "E" Option C Specifications with Pad 1 E/D open circuit www.pletronics.com 425-776-1880 3 LV77D Series 2.5 V LVDS Clock Oscillators January 2010 Typical Phase-Noise Response 0 -20 dBc/Hz -40 -60 -80 -100 -120 -140 -160 10 1,000 100,000 10,000,000 Frequency (Hz) Load Circuit Test Waveform Symmetry Vhigh Out 80% 50% 20% Vlow Out* Trise Tfall Showing Out Measurement only www.pletronics.com 425-776-1880 4 LV77D Series 2.5 V LVDS Clock Oscillators January 2010 Reliability: Environmental Compliance Parameter Condition Mechanical Shock MIL-STD-883 Method 2002, Condition B Vibration MIL-STD-883 Method 2007, Condition A Solderability MIL-STD-883 Method 2003 Thermal Shock MIL-STD-883 Method 1011, Condition A ESD Rating Model Minimum Voltage Conditions Human Body Model 1500 MIL-STD-883 Method 3115 Charged Device Model 1000 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII www.pletronics.com Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial 425-776-1880 5 LV77D Series 2.5 V LVDS Clock Oscillators January 2010 Mechanical: Inches Contacts (pads): Gold 11.8 to 39.4inches (0.3 to 1.0m) over Nickel 50 to 350inches (1.27 to 8.89m) Pad 1 Typical dimensions Not to Scale mm A 0.276 + _0.006 7.00 + _0.15 B 0.197 + _0.006 5.00 + _0.15 C 0.067 max 1.70 max D1 0.038 0.96 E1 0.200 5.08 F1 0.004 0.10 G1 0.050 1.27 1 H 0.055 1.40 I1 0.024 0.60 J1 0.004R 0.10R K1 0.008R 0.20R Function Note 1 Output Enable/Disable When this pad is not connected the oscillator shall operate. When this pad is <0.30 volts, the output will be inhibited (high impedance state.) Recommend connecting this pad to VCC if the oscillator is to be always on. 2 No connect There is no internal connection to this pad 3 Ground (GND) 4 Output 5 Output* 6 Supply Voltage (VCC) The outputs must be terminated, 100 ohms between the outputs is the ideal termination. Recommend connecting appropriate power supply bypass capacitors as close as possible. Layout and application information Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable on both input pads For Optimum Jitter Performance, Pletronics recommends: * a ground plane under the device * no large transient signals (both current and voltage) should be routed under the device * do not layout near a large magnetic field such as a high frequency switching power supply * do not place near piezoelectric buzzers or mechanical fans. www.pletronics.com 425-776-1880 6 LV77D Series 2.5 V LVDS Clock Oscillators January 2010 Reflow Cycle (typical for lead free processing) 260C Maximum 10 Seconds Maximum Temperature (C) 250 215C10C 200 175C10C 150 100 Approximately 50 Seconds 120 to 160 Seconds The part may be reflowed 2 times without degradation. Allowed rate of temperature change Maximum 4C per second Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250 Constant Dimensions Table 1 Tape Size D0 8mm D1 Min E1 P0 1.0 S1 Min T Max 0.6 0.6 T1 Max 2.0 +0.05 _ 12mm 1.5 1.5 1.75 4.0 16mm +0.1 -0.0 1.5 _ +0.1 _0.1 + 24mm P2 0.1 2.0 _ +0.1 1.5 Variable Dimensions Table 2 Tape Size B1 Max E2 Min F P1 T2 Max W Max Ao, Bo & Ko 16 mm 12.1 14.25 7.5 _ +0.1 8.0 + _0.1 8.0 16.3 Note 1 Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale REEL DIMENSIONS A B inches 7.0 10.0 13.0 mm 177.8 254.0 330.2 inches 2.50 4.00 3.75 mm 63.5 101.6 95.3 Tape Width 16.4 +2.0 -0.0 16.0 C mm D mm 13.0 +0.5 / -0.2 16.4 +2.0 -0.0 16.4 +2.0 -0.0 Reel dimensions may vary from the above www.pletronics.com 425-776-1880 7 LV77D Series 2.5 V LVDS Clock Oscillators January 2010 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE's terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE's limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. 19013 36th Ave. West Lynnwood, WA 98036-5761 USA Tel: 425-776-1880 Fax: 425-776-2760 E-mail: ple-sales@pletronics.com URL: www.pletronics.com Copyright (c) 2006, 2007, 2010 Pletronics Inc. www.pletronics.com 425-776-1880 8