Product family data sheet
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp®, EasyWhite® and SC5 Technology® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS130 REV 2A
Cree® XLamp® XHP35 LEDs
PRODUCT DESCRIPTION
The XLamp® XHP35 LED brings the
performance of Crees Extreme High
Power LEDs to the XP footprint, setting a
new standard for performance delivered
by a 3.45 x 3.45 mm LED. Leveraging the
breakthrough 12-V monolithic power die
built on Crees innovative architecture and
uniquely enabled by the SC5 Technology®
Platform, the XHP35 LED allows the
use of readily available cost--optimized
drivers to unleash the capabilities of
Crees high-power LEDs. Available in both
high-density and high-intensity versions,
the XHP35 LED is application optimized
to enable new designs and radically lower
system costs.
FEATURES
Available in white in high-density and
high-intensity versions for design
exibility
XHP35 High Intensity LED is
optimized to deliver maximum
candela through secondary optics
Available in 5-step EasyWhite® bins
at 2700K to 5700K CCT and 3-step
EasyWhite bins at 2700K to 3500K
CCT
Available in ANSI white bins at
2700K to 7000K CCT
Available in standard, 70-, 80-, 85-
and 90-minimum CRI options
Binned at 85°C
Maximum drive current: 1050mA
Low thermal resistance: 1.8°C/W
Wide viewing angle: 115° for high
intensity, 125° for high density
Unlimited oor life at
≤ 30ºC/85% RH
Reow solderable - JEDEC
J-STD-020C
RoHS and REACh compliant
UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ..............................................2
Flux Characteristics, High Density
EasyWhite® Order Codes and Bins ...............3
Flux Characteristics, High Density ANSI
White Order Codes and Bins ........................5
Flux Characteristics, High Intensity
EasyWhite® Order Codes and Bins ...............8
Flux Characteristics, High Intensity ANSI
White Order Codes and Bins ..................... 11
Relative Spectral Power Distribution ........ 15
Relative Flux vs. Junction Temperature .... 15
Electrical Characteristics ........................... 16
Relative Flux vs. Current ............................ 16
Relative Chromaticity vs. Current .............. 17
Relative Chromaticity vs. Temperature ..... 18
Typical Spatial Distribution ........................ 19
Thermal Design .......................................... 20
Performance Groups – Luminous Flux..... 20
Performance Groups – Chromaticity ........ 21
Crees EasyWhite® Chromaticity Regions
Plotted on the 1931 CIE Curve .................. 24
Crees Standard Cool White Kits Plotted
on ANSI Standard Chromaticity Regions .. 27
Crees Standard Warm and Neutral White
Kits Plotted on ANSI Standard
Chromaticity Regions ................................ 28
Bin and Order Code Formats ..................... 29
Reow Soldering Characteristics .............. 30
Notes .......................................................... 31
Mechanical Dimensions ............................ 33
Tape and Reel ............................................. 35
Packaging ................................................... 37
XHP35 High Density LED XHP35 High Intensity LED
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® XHp35 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 1.8
Viewing angle (FWHM) - High Density degrees 125
Viewing angle (FWHM) - High Intensity degrees 115
Temperature coefcient of voltage mV/°C -8
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current mA 1050
Reverse voltage V -5
Forward voltage (@ 350mA, 85°C) V 11.3 11.9
LED junction temperature °C 150
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
FLUX CHARACTERISTICS, HIGH DENSITY EASYWHITE® ORDER CODES AND BINS (TJ
The following table provides order codes for XLamp XHP35 High Density LEDs. For a complete description of how the ux and chromaticity
groups are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).
Nominal
CCT
CRI Minimum Luminous Flux
 3-Step 5-Step
Min Typ Group 


 Group Order Code Group Order Code
5700K
70
E4 635 706
57E
XHP35A-00-0000-0D0BE457E
E2 590 656 XHP35A-00-0000-0D0BE257E
D4 550 612 XHP35A-00-0000-0D0BD457E
80
D4 550 612
57E
XHP35A-00-0000-0D0HD457E
D2 510 567 XHP35A-00-0000-0D0HD257E
90
C4 475 528
57E
XHP35A-00-0000-0D0UC457E
C2 440 489 XHP35A-00-0000-0D0UC257E
B4 410 456 XHP35A-00-0000-0D0UB457E
5000K
70
E4 635 706
50E
XHP35A-00-0000-0D0BE450E
E2 590 656 XHP35A-00-0000-0D0BE250E
D4 550 612 XHP35A-00-0000-0D0BD450E
80
D4 550 612
50E
XHP35A-00-0000-0D0HD450E
D2 510 567 XHP35A-00-0000-0D0HD250E
90
C4 475 528
50E
XHP35A-00-0000-0D0UC450E
C2 440 489 XHP35A-00-0000-0D0UC250E
B4 410 456 XHP35A-00-0000-0D0UB450E
4500K
70
E2 590 656
45E
XHP35A-00-0000-0D0BE245E
D4 550 612 XHP35A-00-0000-0D0BD445E
80
D4 550 612
45E
XHP35A-00-0000-0D0HD445E
D2 510 567 XHP35A-00-0000-0D0HD245E
90
C2 440 489
45E
XHP35A-00-0000-0D0UC245E
B4 410 456 XHP35A-00-0000-0D0UB445E
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
Nominal
CCT
CRI Minimum Luminous Flux
 3-Step 5-Step
Min Typ Group 


 Group Order Code Group Order Code
4000K
70
E2 590 656
40E
XHP35A-00-0000-0D0BE240E
D4 550 612 XHP35A-00-0000-0D0BD440E
D2 510 567 XHP35A-00-0000-0D0BD240E
80
D4 550 612
40E
XHP35A-00-0000-0D0HD440E
D2 510 567 XHP35A-00-0000-0D0HD240E
90
C2 440 489
40E
XHP35A-00-0000-0D0UC240E
B4 410 456 XHP35A-00-0000-0D0UB440E
3500K
70
E2 590 656
35E
XHP35A-00-0000-0D0BE235E
D4 550 612 XHP35A-00-0000-0D0BD435E
D2 510 567 XHP35A-00-0000-0D0BD235E
80
D4 550 612
35G
XHP35A-00-0000-0D0HD435G
35E
XHP35A-00-0000-0D0HD435E
D2 510 567 XHP35A-00-0000-0D0HD235G XHP35A-00-0000-0D0HD235E
C4 475 528 XHP35A-00-0000-0D0HC435G XHP35A-00-0000-0D0HC435E
90
C2 440 489
35G
XHP35A-00-0000-0D0UC235G
35E
XHP35A-00-0000-0D0UC235E
B4 410 456 XHP35A-00-0000-0D0UB435G XHP35A-00-0000-0D0UB435E
3000K
70
D4 550 612
30E
XHP35A-00-0000-0D0BD430E
D2 510 567 XHP35A-00-0000-0D0BD230E
80
D2 510 567
30G
XHP35A-00-0000-0D0HD230G
30E
XHP35A-00-0000-0D0HD230E
C4 475 528 XHP35A-00-0000-0D0HC430G XHP35A-00-0000-0D0HC430E
90
C2 440 489
30G
XHP35A-00-0000-0D0UC230G
30E
XHP35A-00-0000-0D0UC230E
B4 410 456 XHP35A-00-0000-0D0UB430G XHP35A-00-0000-0D0UB430E
B2 380 423 XHP35A-00-0000-0D0UB230G XHP35A-00-0000-0D0UB230E
2700K
80
C4 475 528
27G
XHP35A-00-0000-0D0HC427G
27E
XHP35A-00-0000-0D0HC427E
C2 440 489 XHP35A-00-0000-0D0HC227G XHP35A-00-0000-0D0HC227E
90
B4 410 456
27G
XHP35A-00-0000-0D0UB427G
27E
XHP35A-00-0000-0D0UB427E
B2 380 423 XHP35A-00-0000-0D0UB227G XHP35A-00-0000-0D0UB227E
FLUX CHARACTERISTICS, HIGH DENSITY EASYWHITE® ORDER CODES AND BINS (TJ
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
FLUX CHARACTERISTICS, HIGH DENSITY ANSI WHITE ORDER CODES AND BINS (TJ
The following table provides order codes for XLamp XHP35 High Density LEDs. For a complete description of how the ux and chromaticity
groups are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).
Nomimal
CCT Chromaticity Regions
CRI Minimum Luminous Flux

Order Code
Min Typ Group 



7000K
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
0 68
E4 635 706 XHP35A-00-0000-0D00E40DT
E2 590 656 XHP35A-00-0000-0D00E20DT
D4 550 612 XHP35A-00-0000-0D00D40DT
70
E4 635 706 XHP35A-00-0000-0D0BE40DT
E2 590 656 XHP35A-00-0000-0D0BE20DT
D4 550 612 XHP35A-00-0000-0D0BD40DT
80 D4 550 612 XHP35A-00-0000-0D0HD40DT
D2 510 567 XHP35A-00-0000-0D0HD20DT
90
C4 475 528 XHP35A-00-0000-0D0UC40DT
C2 440 489 XHP35A-00-0000-0D0UC20DT
B4 410 456 XHP35A-00-0000-0D0UB40DT
6500K 1A, 1B, 1C, 1D
0 68
E4 635 706 XHP35A-00-0000-0D00E40E1
E2 590 656 XHP35A-00-0000-0D00E20E1
D4 550 612 XHP35A-00-0000-0D00D40E1
70
E4 635 706 XHP35A-00-0000-0D0BE40E1
E2 590 656 XHP35A-00-0000-0D0BE20E1
D4 550 612 XHP35A-00-0000-0D0BD40E1
80 D4 550 612 XHP35A-00-0000-0D0HD40E1
D2 510 567 XHP35A-00-0000-0D0HD20E1
90
C4 475 528 XHP35A-00-0000-0D0UC40E1
C2 440 489 XHP35A-00-0000-0D0UC20E1
B4 410 456 XHP35A-00-0000-0D0UB40E1
6000K
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
0 68
E4 635 706 XHP35A-00-0000-0D00E40DV
E2 590 656 XHP35A-00-0000-0D00E20DV
D4 550 612 XHP35A-00-0000-0D00D40DV
70
E4 635 706 XHP35A-00-0000-0D0BE40DV
E2 590 656 XHP35A-00-0000-0D0BE20DV
D4 550 612 XHP35A-00-0000-0D0BD40DV
80 D4 550 612 XHP35A-00-0000-0D0HD40DV
D2 510 567 XHP35A-00-0000-0D0HD20DV
90
C4 475 528 XHP35A-00-0000-0D0UC40DV
C2 440 489 XHP35A-00-0000-0D0UC20DV
B4 410 456 XHP35A-00-0000-0D0UB40DV
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
Nomimal
CCT Chromaticity Regions
CRI Minimum Luminous Flux

Order Code
Min Typ Group 



5700K 2A, 2B, 2C, 2D
0 68
E4 635 706 XHP35A-00-0000-0D00E40E2
E2 590 656 XHP35A-00-0000-0D00E20E2
D4 550 612 XHP35A-00-0000-0D00D40E2
70
E4 635 706 XHP35A-00-0000-0D0BE40E2
E2 590 656 XHP35A-00-0000-0D0BE20E2
D4 550 612 XHP35A-00-0000-0D0BD40E2
80 D4 550 612 XHP35A-00-0000-0D0HD40E2
D2 510 567 XHP35A-00-0000-0D0HD20E2
90
C4 475 528 XHP35A-00-0000-0D0UC40E2
C2 440 489 XHP35A-00-0000-0D0UC20E2
B4 410 456 XHP35A-00-0000-0D0UB40E2
5000K 3A, 3B, 3C, 3D
0 68
E4 635 706 XHP35A-00-0000-0D00E40E3
E2 590 656 XHP35A-00-0000-0D00E20E3
D4 550 612 XHP35A-00-0000-0D00D40E3
70
E4 635 706 XHP35A-00-0000-0D0BE40E3
E2 590 656 XHP35A-00-0000-0D0BE20E3
D4 550 612 XHP35A-00-0000-0D0BD40E3
80 D4 550 612 XHP35A-00-0000-0D0HD40E3
D2 510 567 XHP35A-00-0000-0D0HD20E3
90
C4 475 528 XHP35A-00-0000-0D0UC40E3
C2 440 489 XHP35A-00-0000-0D0UC20E3
B4 410 456 XHP35A-00-0000-0D0UB40E3
4500K 4A, 4B, 4C, 4D
0 68 E2 590 656 XHP35A-00-0000-0D00E20E4
D4 550 612 XHP35A-00-0000-0D00D40E4
70 E2 590 656 XHP35A-00-0000-0D0BE20E4
D4 550 612 XHP35A-00-0000-0D0BD40E4
80 D4 550 612 XHP35A-00-0000-0D0HD40E4
D2 510 567 XHP35A-00-0000-0D0HD20E4
90
C4 475 528 XHP35A-00-0000-0D0UC40E4
C2 440 489 XHP35A-00-0000-0D0UC20E4
B4 410 456 XHP35A-00-0000-0D0UB40E4
FLUX CHARACTERISTICS, HIGH DENSITY ANSI ORDER CODES AND BINS (TJ
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
Nomimal
CCT Chromaticity Regions
CRI Minimum Luminous Flux

Order Code
Min Typ Group 



4000K 5A, 5B, 5C, 5D
0 68
E2 590 656 XHP35A-00-0000-0D00E20E5
D4 550 612 XHP35A-00-0000-0D00D40E5
D2 510 567 XHP35A-00-0000-0D00D20E5
70
E2 590 656 XHP35A-00-0000-0D0BE20E5
D4 550 612 XHP35A-00-0000-0D0BD40E5
D2 510 567 XHP35A-00-0000-0D0BD20E5
80 D4 550 612 XHP35A-00-0000-0D0HD40E5
D2 510 567 XHP35A-00-0000-0D0HD20E5
90 C2 440 489 XHP35A-00-0000-0D0UC20E5
B4 410 456 XHP35A-00-0000-0D0UB40E5
3500K 6A, 6B, 6C, 6D
70
E2 590 656 XHP35A-00-0000-0D0BE20E6
D4 550 612 XHP35A-00-0000-0D0BD40E6
D2 510 567 XHP35A-00-0000-0D0BD20E6
80
D4 550 612 XHP35A-00-0000-0D0HD40E6
D2 510 567 XHP35A-00-0000-0D0HD20E6
C4 475 528 XHP35A-00-0000-0D0HC40E6
90 C2 440 489 XHP35A-00-0000-0D0UC20E6
B4 410 456 XHP35A-00-0000-0D0UB40E6
3000K 7A, 7B, 7C, 7D
70 D4 550 612 XHP35A-00-0000-0D0BD40E7
D2 510 567 XHP35A-00-0000-0D0BD20E7
80 D2 510 567 XHP35A-00-0000-0D0HD20E7
C4 475 528 XHP35A-00-0000-0D0HC40E7
90
C2 440 489 XHP35A-00-0000-0D0UC20E7
B4 410 456 XHP35A-00-0000-0D0UB40E7
B2 380 423 XHP35A-00-0000-0D0UB20E7
2700K 8A, 8B, 8C, 8D
80 C4 475 528 XHP35A-00-0000-0D0HC40E8
C2 440 489 XHP35A-00-0000-0D0HC20E8
90 B4 410 456 XHP35A-00-0000-0D0UB40E8
B2 380 423 XHP35A-00-0000-0D0UB20E8
FLUX CHARACTERISTICS, HIGH DENSITY ANSI ORDER CODES AND BINS (TJ
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS (TJ
The following table provides order codes for XLamp XHP35 High Intensity LEDs. For a complete description of how the ux and chromaticity
groups are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).
Nominal
CCT
CRI Minimum Luminous Flux
 3-Step 5-Step
Min Typ Group 


 Group Order Code Group Order Code
5700K
70
D4 550 612
57E
XHP35A-H0-0000-0D0BD457E
D2 510 567 XHP35A-H0-0000-0D0BD257E
C4 475 528 XHP35A-H0-0000-0D0BC457E
80
D2 510 567
57E
XHP35A-H0-0000-0D0HD257E
C4 475 528 XHP35A-H0-0000-0D0HC457E
C2 440 489 XHP35A-H0-0000-0D0HC257E
90
C2 440 489
57E
XHP35A-H0-0000-0D0UC257E
B4 410 456 XHP35A-H0-0000-0D0UB457E
B2 380 423 XHP35A-H0-0000-0D0UB257E
A4 355 395 XHP35A-H0-0000-0D0UA457E
5000K
70
D4 550 612
50E
XHP35A-H0-0000-0D0BD450E
D2 510 567 XHP35A-H0-0000-0D0BD250E
C4 475 528 XHP35A-H0-0000-0D0BC450E
80
D2 510 567
50E
XHP35A-H0-0000-0D0HD250E
C4 475 528 XHP35A-H0-0000-0D0HC450E
C2 440 489 XHP35A-H0-0000-0D0HC250E
90
C2 440 489
50E
XHP35A-H0-0000-0D0UC250E
B4 410 456 XHP35A-H0-0000-0D0UB450E
B2 380 423 XHP35A-H0-0000-0D0UB250E
A4 355 395 XHP35A-H0-0000-0D0UA450E
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
Nominal
CCT
CRI Minimum Luminous Flux
 3-Step 5-Step
Min Typ Group 


 Group Order Code Group Order Code
4500K
70
D4 550 612
45E
XHP35A-H0-0000-0D0BD445E
D2 510 567 XHP35A-H0-0000-0D0BD245E
C4 475 528 XHP35A-H0-0000-0D0BC445E
80
D2 510 567
45E
XHP35A-H0-0000-0D0HD245E
C4 475 528 XHP35A-H0-0000-0D0HC445E
C2 440 489 XHP35A-H0-0000-0D0HC245E
90
B4 410 456
45E
XHP35A-H0-0000-0D0UB445E
B2 380 423 XHP35A-H0-0000-0D0UB245E
A4 355 395 XHP35A-H0-0000-0D0UA445E
4000K
70
D4 550 612
40E
XHP35A-H0-0000-0D0BD440E
D2 510 567 XHP35A-H0-0000-0D0BD240E
C4 475 528 XHP35A-H0-0000-0D0BC440E
C2 440 489 XHP35A-H0-0000-0D0BC240E
80
C4 475 528
40E
XHP35A-H0-0000-0D0HC440E
C2 440 489 XHP35A-H0-0000-0D0HC240E
90
B4 410 456
40E
XHP35A-H0-0000-0D0UB440E
B2 380 423 XHP35A-H0-0000-0D0UB240E
A4 355 395 XHP35A-H0-0000-0D0UA440E
3500K
70
D2 510 567
35E
XHP35A-H0-0000-0D0BD235E
C4 475 528 XHP35A-H0-0000-0D0BC435E
C2 440 489 XHP35A-H0-0000-0D0BC235E
80
C4 475 528
35G
XHP35A-H0-0000-0D0HC435G
35E
XHP35A-H0-0000-0D0HC435E
C2 440 489 XHP35A-H0-0000-0D0HC235G XHP35A-H0-0000-0D0HC235E
B4 410 456 XHP35A-H0-0000-0D0HB435G XHP35A-H0-0000-0D0HB435E
90
B2 380 423
35G
XHP35A-H0-0000-0D0UB235G
35E
XHP35A-H0-0000-0D0UB235E
A4 355 395 XHP35A-H0-0000-0D0UA435G XHP35A-H0-0000-0D0UA435E
FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS (TJ
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
Nominal
CCT
CRI Minimum Luminous Flux
 3-Step 5-Step
Min Typ Group 


 Group Order Code Group Order Code
3000K
70
D2 510 567
30E
XHP35A-H0-0000-0D0BD230E
C4 475 528 XHP35A-H0-0000-0D0BC430E
C2 440 489 XHP35A-H0-0000-0D0BC230E
80
C2 440 489
30G
XHP35A-H0-0000-0D0HC230G
30E
XHP35A-H0-0000-0D0HC230E
B4 410 456 XHP35A-H0-0000-0D0HB430G XHP35A-H0-0000-0D0HB430E
90
B2 380 423
30G
XHP35A-H0-0000-0D0UB230G
30E
XHP35A-H0-0000-0D0UB230E
A4 355 395 XHP35A-H0-0000-0D0UA430G XHP35A-H0-0000-0D0UA430E
A2 330 367 XHP35A-H0-0000-0D0UA230G XHP35A-H0-0000-0D0UA230E
2700K
80
C2 440 489
27G
XHP35A-H0-0000-0D0HC227G
27E
XHP35A-H0-0000-0D0HC227E
B4 410 456 XHP35A-H0-0000-0D0HB427G XHP35A-H0-0000-0D0HB427E
B2 380 423 XHP35A-H0-0000-0D0HB227G XHP35A-H0-0000-0D0HB227E
90
A4 355 395
27G
XHP35A-H0-0000-0D0UA427G
27E
XHP35A-H0-0000-0D0UA427E
A2 330 367 XHP35A-H0-0000-0D0UA227G XHP35A-H0-0000-0D0UA227E
FLUX CHARACTERISTICS, HIGH INTENSITY EASYWHITE® ORDER CODES AND BINS (TJ
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
FLUX CHARACTERISTICS, HIGH INTENSITY ANSI WHITE ORDER CODES AND BINS (TJ
The following table provides order codes for XLamp XHP35 High Intensity LEDs. For a complete description of how the ux and chromaticity
groups are reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 29).
Nomimal
CCT Chromaticity Regions
CRI Minimum Luminous Flux

Order Code
Min Typ Group 



7000K
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
0 68
D4 550 612 XHP35A-H0-0000-0D00D40DT
D2 510 567 XHP35A-H0-0000-0D00D20DT
C4 475 528 XHP35A-H0-0000-0D00C40DT
70
D4 550 612 XHP35A-H0-0000-0D0BD40DT
D2 510 567 XHP35A-H0-0000-0D0BD20DT
C4 475 528 XHP35A-H0-0000-0D0BC40DT
80
D2 510 567 XHP35A-H0-0000-0D0HD20DT
C4 475 528 XHP35A-H0-0000-0D0HC40DT
C2 440 489 XHP35A-H0-0000-0D0HC20DT
90
B4 410 456 XHP35A-H0-0000-0D0UB40DT
B2 380 423 XHP35A-H0-0000-0D0UB20DT
A4 355 395 XHP35A-H0-0000-0D0UA40DT
6500K 1A, 1B, 1C, 1D
0 68
D4 550 612 XHP35A-H0-0000-0D00D40E1
D2 510 567 XHP35A-H0-0000-0D00D20E1
C4 475 528 XHP35A-H0-0000-0D00C40E1
70
D4 550 612 XHP35A-H0-0000-0D0BD40E1
D2 510 567 XHP35A-H0-0000-0D0BD20E1
C4 475 528 XHP35A-H0-0000-0D0BC40E1
80
D2 510 567 XHP35A-H0-0000-0D0HD20E1
C4 475 528 XHP35A-H0-0000-0D0HC40E1
C2 440 489 XHP35A-H0-0000-0D0HC20E1
90
B4 410 456 XHP35A-H0-0000-0D0UB40E1
B2 380 423 XHP35A-H0-0000-0D0UB20E1
A4 355 395 XHP35A-H0-0000-0D0UA40E1
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
Nomimal
CCT Chromaticity Regions
CRI Minimum Luminous Flux

Order Code
Min Typ Group 



6000K
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
0 68
D4 550 612 XHP35A-H0-0000-0D00D40DV
D2 510 567 XHP35A-H0-0000-0D00D20DV
C4 475 528 XHP35A-H0-0000-0D00C40DV
70
D4 550 612 XHP35A-H0-0000-0D0BD40DV
D2 510 567 XHP35A-H0-0000-0D0BD20DV
C4 475 528 XHP35A-H0-0000-0D0BC40DV
80
D2 510 567 XHP35A-H0-0000-0D0HD20DV
C4 475 528 XHP35A-H0-0000-0D0HC40DV
C2 440 489 XHP35A-H0-0000-0D0HC20DV
90
C2 440 489 XHP35A-H0-0000-0D0UC20DV
B4 410 456 XHP35A-H0-0000-0D0UB40DV
B2 380 423 XHP35A-H0-0000-0D0UB20DV
A4 355 395 XHP35A-H0-0000-0D0UA40DV
5700K 2A, 2B, 2C, 2D
0 68
D4 550 612 XHP35A-H0-0000-0D00D40E2
D2 510 567 XHP35A-H0-0000-0D00D20E2
C4 475 528 XHP35A-H0-0000-0D00C40E2
70
D4 550 612 XHP35A-H0-0000-0D0BD40E2
D2 510 567 XHP35A-H0-0000-0D0BD20E2
C4 475 528 XHP35A-H0-0000-0D0BC40E2
80
D2 510 567 XHP35A-H0-0000-0D0HD20E2
C4 475 528 XHP35A-H0-0000-0D0HC40E2
C2 440 489 XHP35A-H0-0000-0D0HC20E2
90
C2 440 489 XHP35A-H0-0000-0D0UC20E2
B4 410 456 XHP35A-H0-0000-0D0UB40E2
B2 380 423 XHP35A-H0-0000-0D0UB20E2
A4 355 395 XHP35A-H0-0000-0D0UA40E2
FLUX CHARACTERISTICS, HIGH INTENSITY ANSI ORDER CODES AND BINS (TJ
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
Nomimal
CCT Chromaticity Regions
CRI Minimum Luminous Flux

Order Code
Min Typ Group 



5000K 3A, 3B, 3C, 3D
0 68
D4 550 612 XHP35A-H0-0000-0D00D40E3
D2 510 567 XHP35A-H0-0000-0D00D20E3
C4 475 528 XHP35A-H0-0000-0D00C40E3
70
D4 550 612 XHP35A-H0-0000-0D0BD40E3
D2 510 567 XHP35A-H0-0000-0D0BD20E3
C4 475 528 XHP35A-H0-0000-0D0BC40E3
80
D2 510 567 XHP35A-H0-0000-0D0HD20E3
C4 475 528 XHP35A-H0-0000-0D0HC40E3
C2 440 489 XHP35A-H0-0000-0D0HC20E3
90
C2 440 489 XHP35A-H0-0000-0D0UC20E3
B4 410 456 XHP35A-H0-0000-0D0UB40E3
B2 380 423 XHP35A-H0-0000-0D0UB20E3
A4 355 395 XHP35A-H0-0000-0D0UA40E3
4500K 4A, 4B, 4C, 4D
0 68
D4 550 612 XHP35A-H0-0000-0D00D40E4
D2 510 567 XHP35A-H0-0000-0D00D20E4
C4 475 528 XHP35A-H0-0000-0D00C40E4
70
D4 550 612 XHP35A-H0-0000-0D0BD40E4
D2 510 567 XHP35A-H0-0000-0D0BD20E4
C4 475 528 XHP35A-H0-0000-0D0BC40E4
80
D2 510 567 XHP35A-H0-0000-0D0HD20E4
C4 475 528 XHP35A-H0-0000-0D0HC40E4
C2 440 489 XHP35A-H0-0000-0D0HC20E4
90
B4 410 456 XHP35A-H0-0000-0D0UB40E4
B2 380 423 XHP35A-H0-0000-0D0UB20E4
A4 355 395 XHP35A-H0-0000-0D0UA40E4
FLUX CHARACTERISTICS, HIGH INTENSITY ANSI ORDER CODES AND BINS (TJ
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp® XHp35 LED
Notes:
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 31).
Cree XLamp XHP35 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and are for reference only.
Nomimal
CCT Chromaticity Regions
CRI Minimum Luminous Flux

Order Code
Min Typ Group 



4000K 5A, 5B, 5C, 5D
0 68
D4 550 612 XHP35A-H0-0000-0D00D40E5
D2 510 567 XHP35A-H0-0000-0D00D20E5
C4 475 528 XHP35A-H0-0000-0D00C40E5
C2 440 489 XHP35A-H0-0000-0D00C20E5
70
D4 550 612 XHP35A-H0-0000-0D0BD40E5
D2 510 567 XHP35A-H0-0000-0D0BD20E5
C4 475 528 XHP35A-H0-0000-0D0BC40E5
C2 440 489 XHP35A-H0-0000-0D0BC20E5
80 C4 475 528 XHP35A-H0-0000-0D0HC40E5
C2 440 489 XHP35A-H0-0000-0D0HC20E5
90
B4 410 456 XHP35A-H0-0000-0D0UB40E5
B2 380 423 XHP35A-H0-0000-0D0UB20E5
A4 355 395 XHP35A-H0-0000-0D0UA40E5
3500K 6A, 6B, 6C, 6D
70
D2 510 567 XHP35A-H0-0000-0D0BD20E6
C4 475 528 XHP35A-H0-0000-0D0BC40E6
C2 440 489 XHP35A-H0-0000-0D0BC20E6
80
C4 475 528 XHP35A-H0-0000-0D0HC40E6
C2 440 489 XHP35A-H0-0000-0D0HC20E6
B4 410 456 XHP35A-H0-0000-0D0HB40E6
90 B2 380 423 XHP35A-H0-0000-0D0UB20E6
A4 355 395 XHP35A-H0-0000-0D0UA40E6
3000K 7A, 7B, 7C, 7D
70
D2 510 567 XHP35A-H0-0000-0D0BD20E7
C4 475 528 XHP35A-H0-0000-0D0BC40E7
C2 440 489 XHP35A-H0-0000-0D0BC20E7
80 C2 420 489 XHP35A-H0-0000-0D0HC20E7
B4 410 456 XHP35A-H0-0000-0D0HB40E7
90
B2 380 423 XHP35A-H0-0000-0D0UB20E7
A4 355 395 XHP35A-H0-0000-0D0UA40E7
A2 330 367 XHP35A-H0-0000-0D0UA20E7
2700K 8A, 8B, 8C, 8D
80
C2 420 489 XHP35A-H0-0000-0D0HC20E8
B4 410 456 XHP35A-H0-0000-0D0HB40E8
B2 380 423 XHP35A-H0-0000-0D0HB20E8
90 A4 355 395 XHP35A-H0-0000-0D0UA40E8
A2 330 367 XHP35A-H0-0000-0D0UA20E8
FLUX CHARACTERISTICS, HIGH INTENSITY ANSI ORDER CODES AND BINS (TJ
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp® XHp35 LED
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IFm
Relative Spectral Power
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
6000 K, 70 CRI
5000 K, 70 CRI
3000 K, 80 CRI
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp® XHp35 LED
ELECTRICAL CHARACTERISTICS (TJ
RELATIVE FLUX VS. CURRENT (TJ
Electrical Characteristics (Tj = 85°C)
175
350
525
700
875
1050
10.5 11.0 11.5 12.0 12.5
Forward Current (mA)
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 85°C)
0%
40%
80%
120%
160%
200%
240%
0175 350 525 700 875 1050
Relative Luminous Flux
Forward Current (mA)
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp® XHp35 LED

Relative Chromaticity Vs. Current, WW - High Density
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0175 350 525 700 875 1050
Current (mA)
ΔCCx
ΔCCy
High Density
Relative Chromaticity Vs. Current, WW - High Intensity
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0175 350 525 700 875 1050
Current (mA)
ΔCCx
ΔCCy
High Intensity
Copyright © 2015-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite® and SC5 Technology® are registered
trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp® XHp35 LED

Relative Chromaticity Vs. Temperature WW - High Density
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
High Density
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
High Intensity