6mm SMD potentiometer PS-6 & PSX-6 MAIN FEATURES Specifically designed for leadfree reflow soldering processes (excellent performance). Carbon resistive element. IP54 protection according to IEC 60529. Moisture sensitivity level 1 (PS-6). Embossed tape according to IEC 60286-3:2007. Wiper positioned at initial, 50% or fully clockwise. Full traceability. Also upon request: Long life model for low cost control potentiometer applications. Shaft - knob. Self extinguishable plastic UL 94V-0 (PS-6). MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Mechanical rotation angle: 235 5 Range of values*: Electrical rotation angle: 200 20 Torque: 0.2 to 2 Ncm. (0.3 to 2.7 in-oz) Stop torque: > 4 Ncm. ( >7 in-oz) 1K Rn 5M (Decad. 1.0 - 2.0 - 2.2 - 2.5 -4.7 -5.0) Std. tolerance*: 1K 500K 500K 1.5 30% 50% Taper*: Linear Nominal Power: 0.1W @ 50C (122F) Operating temperature: PSX-6: 25C + 70C PS-6: 40C + 85C Residual resistance: * Others upon request HOW TO ORDER Part number examples: PS6KV50-103A3030: PS6 model with K rotor, V50 mounting type, 10K ohm resistive value, linear taper and 30% tolerance. PS6WV40-502A2525-06AZ-PF: PS6 model with inserted knob fig. 6, 5K ohm resisitive value, linear taper, 25% tolerance, color of the knob: blue; wiper positioned at the end of the travel. OPTIONAL EXTRAS PS6 K V50 Series Code PS6 PSX6 V40 V45 V50 V55 Rotors K M W - 102 A 3030 Taper Shaft/knob A = Lin. Value 102 = 1K - - 05 = Fig. 5 06 = Fig. 6 6144 Tolerance AZ = Blue CR = Cream GR = Grey NE = Black RO = Red VE = Green 1 - Wiper position Packaging [empty] = initial PM = 50% PF = Final B = Bulk I= non flammable (Others: check availability) All Piher products can be adapted to meet customers requirements. www.piher.net Knob/shaft/rotor colour Flammability 3030 = 30% 5030 = 50% 504 = 500K - (Non flammable plastic for housing and rotor) HOW TO ORDER CUSTOM DRAWING STANDARD OPTIONS PS(x)-6KV50 + DRAWING NUMBER Housing colour ...................................... This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. PS-6 ....................................... Black Rotor colour (Max. 16 characters) Grey Black Grey Wiper position ...................................... Initial Packaging........................................ Reel ................................................ 1000 cycles Life Detents ................................................ ................................................................... PSX-6 None ROTORS Initial Reel 1000 cycles None Note: wipers are shown positioned at 50%. W model has an factory-inserted knob. K= Cross slot thru hole M= Hexagonal thru hole 1.4 0.60 1.80 W = with inserted shaft or knob. Default color of the knob: cream. S (wiper) Drawing example, W V40 with knob ref 6: 6.7 (final) E A (initial) 4 1.55 S 8.4 2 6.3 0.3 1.4 4.05 2 5.15 10 3.85 4.35 2.5 2.15 0.25 = = E A 2.15 4.3 0.8 DIMENSIONS - V40 2 4.05 4 1.4 8.4 0.6 1.8 2 6 ,3 0 5.15 10 4.35 2.5 Recommended PCB hole layout = 2.15 2.15 = 4.3 DIMENSIONS - V45 2 0.3 6.3 5.25 0.6 2.5 2.15 www.piher.net 2.15 2.75 3.8 7.35 1.8 2 1.4 2.5 4 0.25 4.3 2 Recommended PCB hole layout DIMENSIONS - V50 2 4.4 0.7 2.5 8.35 0.6 2.5 4 3.25 1.8 3.6 6.3 2.5 2.5 2.5 Recommended PCB hole layout 2.5 DIMENSIONS - V55 4.4 2 6.3 Recommended PCB hole layout 0.6 2 1.8 0.3 2.35 0.7 2 5.9 2.5 2.5 2.5 0.25 2.5 2.75 2.5 POSITIONING Std. Position = CCW 50% 35 INITIAL CCW FINAL CW PSX-6 RECOMMENDED REFLOW PROFILE Heat used to melt solder paste Max. temp 240C 200C (*) <40 s Preheat temp. 150C (*) Between 60-90 s Room temp. (*) Melting point temp. depends on solder properties The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly layout or other design or process variables. Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support. PSX-6 TESTS VARIATIONS ELECTRICAL LIFE 1.000 h. @ 50C; 0.10 W 10% MECHANICAL LIFE (CYCLES)* 1000 @ 10 CPM ...15 CPM 10 % TEMPERATURE COEFFICIENT 25C; +70C 1000 ppm THERMAL CYCLING 16 h. @ 85C; 2h. @ 25C 5 % DAMP HEAT 500 h. @ 40C @ 95% HR 15 % VIBRATION (for each plane X,Y,Z) 2 h. @ 10 Hz. ... 55 Hz. 3 % * Tests at room temperature. Other life cycles upon request. NOTE: Out of range values may not comply these results. Please confirm with the factory all the information before designing in. www.piher.net 3 PS-6 RECOMMENDED REFLOW PROFILE Heat used to melt solder paste Max. temp 250C 200C (*) 30-45 s Preheat temp. 150C (*) Between 60-120 s Room temp. (*) Melting point temp. depends on solder properties The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly layout or other design or process variables. Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support. PS-6 TESTS VARIATIONS ELECTRICAL LIFE 1.000 h. @ 50C; 0.10 W 10% MECHANICAL LIFE (CYCLES)* 1000 @ 10 CPM ...15 CPM 10 % TEMPERATURE COEFFICIENT 40C; +85C 1500 ppm 25C; +70C 1000 ppm THERMAL CYCLING 16 h. @ 90C; 2h. @ 40C 5 % DAMP HEAT 500 h. @ 40C @ 95% HR 15 % VIBRATION (for each plane X,Y,Z) 2 h. @ 10 Hz. ... 55 Hz. 3 % * Tests at room temperature. Other life cycles upon request. NOTE: Out of range values may not comply these results. Please confirm with the factory all the information before designing in. SHAFT / KNOB Ref.: 6148 / Fig. 5 6.5 0.8 5.5 3.8 2.2 6.3 Ref.: 6160 / Fig. 6 2 6.5 3.85 3.8 2.2 6.3 13.30 Ref.: 6144 10 1 2.90 For PS-6 models. Upon request. 1.50 2 5 4.9 www.piher.net 4 PACKAGING V40 and V45 models BULK (1000pcs / Box) EMBOSSED TAPE (1000pcs / Reel) 29 330 A A Label 12 5 1.75 4 5 24 11.5 1. V50 and V55 models BULK (1000pcs / Box) EMBOSSED TAPE (1000pcs / Reel) 21 330 A A 12 4 5 16 7.5 1. Direction of unreeling www.piher.net 1.75 Label 5 5.4 RECOMMENDED CONNECTIONS VCC E Piher potentiometers recommended connection circuit for a position sensor or control application. (voltage divider circuit electronic design). S R A AD RL C Noise filter. Ground. RL 100 x R Disclaimer The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information. Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Piher), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein. Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Pihers terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products. No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited. e r.n d R EAC H an he S at w ww.pi Pb ce ISO 14001 BUREAU VERITAS Certification 3D models in our web te s o f c o m fica pl rti i an ce Piher is an AmphenolTM company. t Ro H Note: All Piher products can be adapted to meet customers requirements. Due to continuous process improvement, specifications are subject to change without notice. Please always use the latest updated datasheets and 3D models published at our website www.piher.net. Alternative product: N6R. Datasheet available at www.piher.net www.piher.net v291118 6