SPECIFICATION CONTROL DRAWING Product Revision Product Name CWT-4058-W122-5/9 A CWT-4059-W122-5/9 A CWT-4174-W122-5/9 A Product Dimensions oA oB oC min min min 6.0 3.1 1.0 (0.235) (0.120) (0.040) 7.0 3.9 1.0 (0.275) (0.155) (0.040) 4.5 1.7 1.0 (0.175) (0.065) (0.040) Cable Dimensions oE G M min 3.3 19.0 12.5 (0.130) (0.750) (0.500) 3.7 19.0 12.5 (0.145) (0.750) (0.500) 2.3 19.0 12.5 (0.090) (0.750) (0.500) Typical RG 58 RG59 RG 174 N 6.0 (0.235) 6.0 (0.235) 6.0 (0.235) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. MELTABLE RING: Thermally stabilized thermoplastic. Color:clear. 4. MELTABLE RING: Thermally stabilized thermoplastic. Color:blue. 5. CONDUCTOR LEAD: Cross-linked polyolefin insulated stranded, tin plated copper. Color:white. 6. GROUND LEAD: Cross-linked polyolefin insulated stranded, tin plated copper. Color:green. APPLICATION 1. These parts are designed to provide an environment protected coaxial termination on cables, rated for at least +65C minimum, meeting the dimensional criteria listed, having bare copper, tin or silver plated shields and conductors. 2. Temperature range: -55C to +125C. Install using Raychem-approved convection heating tools in accordance with Raychem installation procedure RPIP-824-00. Part selection: JOD: Cable jacket must be less than oA min. DOD: Cable dielectric must be less than oB min. SOD: Cable shield must be greater than oE min. POD: Conductor must be between oC min and 0.3(.012). For best results, prepare the cable as shown: * A trademark of Tyco Electronics Corporation. Tyco Electronics Corporation 305 Constitution Drive Menlo Park, CA 94025, USA Raychem Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Tyco Electronics reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate the 0.00 N/A suitability of the product for their application. ROUGHNESS IN 0.0 N/A MICRON 0 N/A DRAWN BY: REPLACES: DCR NUMBER: JRIVERA D981001 D981255 If this document is printed it becomes uncontrolled. Check for the latest revision. TITLE: COAXIAL TERMINATION KIT DOCUMENT NO.: CWT-4XXX-W122-5/9 DATE: DOC ISSUE: 2 7/6/98 PROD. REV. SEE TABLE SCALE: None SIZE: SHEET: A 1 of 1