Y0793400R000B0L - VISHAY - Datasheet.Live

High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,

Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 %

RCK Series

Vishay Foil Resistors

Document Number: 63214 For any questions, contact: foil@vishaypg.com www.vishayfoilresistors.com

Revision: 13-Jun-11 1

INTRODUCTION

Bulk Metal® Foil (BMF) technology outperforms all other

resistor technologies available today for applications that

require high precision and high stability.

This technology has been pioneered and developed by

Vishay Foil Resistors (VFR), and products based on this

technology are the most suitable for a wide range of

applications. BMF technology allows the production of

customer-oriented products, designed to satisfy specific

challenging technical requirements.

The RCK series of BMF resistors offers low TCR, excellent

load life stability, tight tolerance, fast response time, low

current noise, low thermal EMF and low voltage coefficient,

all in one resistor.

The RCK series is virtually insensitive to destabillizing

factors. The resistor element is a solid alloy that displays the

desirable bulk properties of its parent material, thus it is

inherently stable and noise free. The standard design of

these resistors provides a unique combination of

characteristics found in no other single resistor.

VFR's application engineering department is available to

advise and to make recommendations. For non-standard

technical requirements and special applications, please

contact foil@vishaypg.com.

TABLE 1 - RESISTANCE VERSUS TCR

(- 55 °C to + 125 °C, + 25 °C ref.)

RESISTOR(1) RESISTANCE

VALUE (Ω)

TYPICAL TCR AND

MAX SPREAD

(ppm/°C)

RCK0X80 to < 1M ± 2 ± 2.5

RCK0X50 to < 80 ± 2 ± 3.5

RCK0X0.5 to < 50 ± 2 ± 4.5

(1) X refers to RCK Series model number - see Table 2

FEATURES

•

Temperature coefficient of resistance (TCR):

- 55 °C to + 125 °C, 25 °C ref.

- RCK0

series: ± 2 ppm/°C typical (see table 1)

•

Power rating: to 1 W at + 125 °C

•

Resistance tolerance: to ± 0.005 % (50 ppm)

•

Load life stability: ± 0.005 % at 70 °C, 2000 h at

rated power

•

Resistance range: 0.5

to 1 M

(for higher or lower

values, please contact Application Engineering)

•Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•Electrostatic discharge (ESD) at least to 25 kV

•

Non inductive, non capacitive design

•Rise time: 1 ns effectively no ringing

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C

•

Voltage coefficient: < 0.1 ppm/V

•

Low inductance: < 0.08 µH

•

Non hot-spot design

•Terminal finishes available: lead (Pb)-free, tin/lead alloy

•

Matched sets are available on request

(TCR tracking: to 0.5 ppm/°C)

•Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

•For better TCR performances please review the

datasheets for the Z Series and Z203

FIGURE 1 - TYPICAL RESISTANCE CHANGE

VERSUS TEMPERATURE CURVES AND

CHORD SLOPES (TCR) OF TWO ALLOYS

IN MILITARY RANGE

- 50 - 25 0 + 25 + 50 + 75 + 100 + 125

- 55

C Alloy

2 ppm/°C

–2 ppm/°C

+2 ppm/°C

+ 150

+ 100

+ 50

- 50

- 100

- 150

- 200

ΔR

(ppm)

Temperature (°C)

* Pb containing terminations are not RoHS compliant, exemptions may apply

FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS

Model Number

VFR

XXXX

RCK02

ST1)

Date Code

Front View Rear View

Lead Material #22 AWG

Round Solder Coated Copper

Optional Customer Part Number

Print specification, etc. if required

Resistance

Value Code

Tolerance

XXXXXX

100R01

0.01 %

Week

Year

(Pb - free coating available)

Note

1. Standoffs provided to allow proper flushing of flux, debris, and contaminates from under resistor after all solder operations.

2. The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board

when the standoffs are seated on the printed circuit board.

TABLE 2 - MODEL SELECTION

MODEL

NUMBER

RESISTANCE

RANGE

(Ω)

MAXIMUM

WORKING

VOLTAGE

AMBIENT

POWER RATING AVERAGE

WEIGHT IN

GRAMS

DIMENSIONS TIGHTEST

TOLERANCE

VS. LOWEST

RESISTANCE

VALUE

+ 70 °C

+ 125 °C INCHES mm

RCK02A

(RCK02) (1) 1 to 150K 300

0.6 W 0.3 W

0.6

W: 0.0984 max.

L: 0.300 ± 0.010

H: 0.326 ± 0.010

ST: 0.010 min.

SW: 0.040 ± 0.010

LL: 1.000 ± 0.125

LS: 0.150 ± 0.0054 (1)

2.5 max.

7.62 ± 0.25

8.28 ± 0.25

0.254 min.

1.02 ± 0.13

25.4 ± 3.18

3.81 ± 0.13

0.005 %/50 Ω

0.01 %/25 Ω

0.02 %/12 Ω

0.05 %/5 Ω

0.1 %/2 Ω

0.50 %/1 Ω

1 %/0.5 Ω

up to 100K

0.4 W 0.2 W

over 100K

RCK04 1 to 500K 350

1.0 W 0.5 W

1.4

W: 0.138 max.

L: 0.575 max.

H: 0.413 max.

ST: 0.035 ± 0.005

SW: 0.050 ± 0.005

LL: 1.000 ± 0.125

LS: 0.400 ± 0.020

3.50 max.

14.61 max.

10.49 max.

0.889 ± 0.13

1.27 ± 0.13

25.4 ± 3.18

10.16 ± 0.51

up to 200K

0.6 W 0.3 W

over 200K

RCK05A 1 to 750K 350

1.5 W 0.75 W

1.9

W: 0.160 max.

L: 0.820 max.

H: 0.413 max.

ST: 0.035 ± 0.005

SW: 0.050 ± 0.005

LL: 1.000 ± 0.125

LS: 0.650 ± 0.020

4.06 max.

20.83 max.

10.49 max.

0.889 ± 0.13

1.27 ± 0.13

25.4 ± 3.18

16.51 ± 0.51

up to 300K

0.8 W 0.4 W

over 300K

RCK05 1 to 750K 350

1.5 W 0.75 W

1.9

W: 0.138 max.

L: 0.890 max.

H: 0.413 max.

ST: 0.035 ± 0.005

SW: 0.050 ± 0.005

LL: 1.000 ± 0.125

LS: 0.7 ± 0.05

3.505 max.

22.606 max.

10.49 max.

0.889 ± 0.13

1.27 ± 0.13

25.4 ± 3.18

17.78 ± 1.27

up to 300K

0.8 W 0.4 W

over 300K

RCK06 0.5 to 1M 500

2.0 W 1.0 W

4.0

W: 0.260 max.

L: 1.200 max.

H: 0.413 max.

ST: 0.035 ± 0.005

SW: 0.050 ± 0.005

LL: 1.000 ± 0.125

LS: 0.900 ± 0.020

6.60 max.

30.48 max.

10.49 max.

0.889 ± 0.13

1.27 ± 0.13

25.4 ± 3.18

22.86 ± 0.51

up to 400K

1.0 W 0.5 W

over 400K

RCK Series

Vishay Foil Resistors

www.vishayfoilresistors.com For any questions, contact: foil@vishaypg.com Document Number: 63214

2Revision: 13-Jun-11

Notes

(1) For RCK02, L.S. = 5.08 mm (0.200 " inches).

FIGURE 3 - POWER DERATING CURVE

200 %

175 %

150 %

125 %

100 %

75 %

50 %

25 %

0 %

- 75

Ambient Temperature (°C)

Percent of Rated Power at + 125 °C

- 55 °C

Double Rated Power

Rated Power

2001751501251007550250- 25- 50

+ 70 °C

RCK Series

Vishay Foil Resistors

Document Number: 63214 For any questions, contact: foil@vishaypg.com www.vishayfoilresistors.com

Revision: 13-Jun-11 3

FIGURE 4 - TRIMMING TO VALUES

(conceptual illustration)

Mutual Inductance

Reduction due

to Change in

Current Direction

Current Path

Before Trimming

Note: Foil shown in black, etched spaces in white

Interloop Capacitance

Reduction in Series

Trimming Process

Removes this Material

from Shorting Strip Area

Changing Current Path

and Increasing

Resistance

Current Path

After Trimming

TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON

MIL-PRF-55182

CHAR J

RCK-SERIES

MAXIMUM ΔR

RCK-SERIES

TYPICAL ΔR

Test Group I

Thermal shock, 5 x (- 65 °C to + 150 °C) ± 0.2 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm)

Short time overload, 6.25 x rated power ± 0.2 % ± 0.01 % (100 ppm) ± 0.003 % (30 ppm)

Test Group II

Resistance temperature characteristics(1) ± 25 ppm/°C ± 6.5 ppm/°C ± 2.0 ppm/°C

Low temperature storage (24 h at - 65 °C) ± 0.15 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm)

Low temperature operation

(45 min, rated power at - 65 °C) ± 0.15 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm)

Terminal strength ± 0.2 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm)

Test Group III

Dielectric Withstanding Voltage (DWV) ± 0.15 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm)

Resistance to solder heat ± 0.1 % ± 0.01 % (100 ppm) ± 0.005 % (50 ppm)

Moisture resistance ± 0.4 % ± 0.05 % (500 ppm) ± 0.01 % (100 ppm)

Test Group IV

Shock ± 0.2 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm)

Vibration ± 0.2 % ± 0.01 % (100 ppm) ± 0.002 % (20 ppm)

Test Group V

Life test at 0.3 W/+ 125 °C

2000 h ± 0.5 % ± 0.015 % (150 ppm) ± 0.01 % (100 ppm)

10 000 h ± 2.0 % ± 0.05 % (500 ppm) ± 0.03 % (300 ppm)

Test Group Va

Life test at 0.6 W (2 x rated power)/+ 70 °C, 2000 h ± 0.5 % ± 0.015 % (150 ppm) ± 0.01 % (100 ppm)

Test Group VI

High temperature exposure (2000 h at + 175 °C) ± 2.0 % ± 0.1 % (1000 ppm) ± 0.05 % (500 ppm)

Test Group VII

Voltage coefficient 5 ppm/V < 0.1 ppm/V < 0.1 ppm/V

(1) See Table 1.

FIGURE 5 - LONG-TERM STABILITY OVER 29 YEARS

(0.1W AT 70°C, 50 SAMPLES RCK02, 10KΩ)

ΔR/R (ppm)

Time (Years)

-20

-40

-60

-80

-100

-120

0 5 10 15 20 25 30

RCK Series

Vishay Foil Resistors

www.vishayfoilresistors.com For any questions, contact: foil@vishaypg.com Document Number: 63214

4Revision: 13-Jun-11

STANDARD OPERATIONS AND TEST

CONDITIONS

A. Standard Test Operations:

By 100 % Inspection

•Short-time overload (6.25 x rated power for 5 s)

•Resistance - tolerance check

•Visual and mechanical

By Sample Inspection

•TCR

•Environmental tests per table 3 on a quarterly basis to

establish performance by similarity

B. Standard Test Conditions:

•Lead test point: 0.5" (12.7 mm) from resistor body

•Temperature: + 23 °C ± 2 °C

•Relative humidity: per MIL-STD-202

IMPROVED PERFORMANCE TESTING (IPT)

The preceding information is based on product directly off

the production line. Improved performance (meaning

increased time stability with load and other stresses) is

available through factory conducted “Improved Performance

Testing”. The test routine is usually tailored to the user’s

stability objectives and IPT-processed resistors can exhibit

improved load-life stability levels of less than 50 ppm.

Various screen test routines are available and all anticipated

stresses must be taken into account before settling on one

specific test routine. VFR's application engineering

department is prepared to discuss and recommend

appropriate routines given the full spectrum of anticipated

stresses and stability requirements.

TABLE 4 - “RCK” SERIES SPECIFICATIONS

Stability (1)

Load life at 2000 h ± 0.015 % (150 ppm) Maximum ΔR at 0.3 W/+ 125 °C

± 0.005 % (50 ppm) Maximum ΔR at 0.1 W/+ 70 °C

Load life at 10 000 h ± 0.05 % (500 ppm) Maximum ΔR at 0.3 W/+ 125 °C

± 0.01 % (100 ppm) Maximum ΔR at 0.05 W/+ 125 °C

Current Noise 0.010 µV (RMS)/V of applied voltage (- 40 dB)

High Frequency Operation

Rise time 1.0 ns at 1 kΩ

Inductance (L) (2) 0.1 µH maximum; 0.08 µH typical

Capacitance (C) 1.0 pF maximum; 0.5 pF typical

Voltage Coefficient < 0.1 ppm/V (3)

Thermal Electromotive Force (EMF) (4) 0.1 µV/°C Maximum; 0.05 µV/°C typical

1 µV/W (Model RCK02)

Notes

(1) Load life ΔR maximum can be reduced by 80 %, please contact applications engineering department.

(2) Inductance (L) due mainly to the leads.

(3) The resolution limit of existing test equipment (within the measurement capability of the equipment, or “essentially zero”.)

(4) µV/°C relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor.

TABLE 5 - GLOBAL PART NUMBER INFORMATION (1)

NEW GLOBAL PART NUMBER: Y079380K5000V9L (preferred part number format)

DENOTES PRECISION VALUE CHARACTERISTICS

Y R = Ω

K = kΩ

M = MΩ

0 = standard

9 = lead (Pb)-free

1 to 999 = custom

PRODUCT CODE RESISTANCE TOLERANCE PACKAGING

0793 = RCK02

4793 = RCK02A

0771 = RCK04

0772 = RCK05

4772 = RCK05A

0773 = RCK06

V = ± 0.005 %

T = ± 0.01 %

Q = ± 0.02 %

A = ± 0.05 %

B = ± 0.1 %

C = ± 0.25 %

D = ± 0.5 %

F = ± 1.0 %

L = bulk pack

FOR EXAMPLE: ABOVE GLOBAL ORDER Y0793 80K5000 V 9 L:

TYPE: RCK02

VALUE: 80.5 kΩ

ABSOLUTE TOLERANCE: ± 0.005 %

TERMINATION: lead (Pb)-free

PACKAGING: bulk pack

HISTORICAL PART NUMBER: RCK02 T 80K500 V B (will continue to be used)

RCK02 T80K500 V B

MODEL TERMINATION RESISTANCE VALUE TOLERANCE PACKAGING

RCK02

RCK02A

RCK04

RCK05

RCK05A

RCK06

T = lead (Pb)-free

None = tin/lead alloy

250R00 = 250.00 Ω

5K2310 = 5.231 kΩ

1M000 = 1 MΩ

V = ± 0.005 %

T = ± 0.01 %

Q = ± 0.02 %

A = ± 0.05 %

B = ± 0.1 %

C = ± 0.25 %

D = ± 0.5 %

F = ± 1.0 %

B = bulk pack

RCK Series

Vishay Foil Resistors

Document Number: 63214 For any questions, contact: foil@vishaypg.com www.vishayfoilresistors.com

Revision: 13-Jun-11 5

Note

(1) For non-standard requests, please contact application engineering.

7938 K500Y0 V90 L0

Vishay Precision Group, Inc.

www.vpgsensors.com

Legal Disclaimer Notice

Document No.: 63999

Revision: 15-Jul-2014

Disclaimer

ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Vishay Precision Group, Inc., its afﬁliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in

any other disclosure relating to any product.

The product speciﬁcations do not expand or otherwise modify VPG’s terms and conditions of purchase, including but

not limited to, the warranty expressed therein.

VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.

To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the

application or use of any product, (ii) any and all liability, including without limitation special, consequential or

incidental damages, and (iii) any and all implied warranties, including warranties of ﬁtness for particular purpose,

non-infringement and merchantability.

Information provided in datasheets and/or speciﬁcations may vary from actual results in different applications and

performance may vary over time. Statements regarding the suitability of products for certain types of applications

are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s

responsibility to validate that a particular product with the properties described in the product speciﬁcation is suitable for

use in a particular application. You should ensure you have the current version of the relevant information by contacting

VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.

No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any

conduct of VPG.

The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise

expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do

so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.

Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such

applications.

Product names and markings noted herein may be trademarks of their respective owners.

Disclaimer

Legal Disclaimer Notice