MTA (Mass Termination Specifications subject to change. For latest design specifications... 1-800-522-6752 Assemblies) Printed Circuit Board Connectors Introduction MTA, Mass Termination Assemblies, is a complete printed circuit board inter- connection system, offering design versatility and low applied cost. A variety of wire sizes and types from discrete to ripbon cable can be mass terminated in one step without wire stripping. Mass termination of wire provides the lowest applied cost because it drastically reduces the labor content of virtually any cable or harness assembly required. Labor savings from 50 to 95 percent are attainable, depending on applications. Besides low applied cost, other desirable benefits are derived from the MTA system, such as: * Increased Quality One step assembly No wire stripping No contact damage No tooling wear AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 e Ease of Handling One step assembly Reduced wiring errors Preloaded contacts Simpler tooling Simple maintenance and repair Wire-to-post connectors are preloaded with dual beam contacts. Card edge connectors are preloaded with leaf contacts. All contacts are slotted for the insulation displacement termination technique. The MTA technique elimi- nates the need for prestrip- ping the conductors. The insulation is displaced and the wire makes positive contact with the dual slotted beams. The wire deflection of the beams results in stored energy spring contact force which provides a stable, long life termination. Four systems are available: m MTA-100 on .100 center- lines for .025 square posts, m MTA-156 on .156 center- lines for .045 round or square posts, m MTA-156 Cable-to-Cable Posted Connectors on .156 centerlines, m MTA-156 Card Edge Connectors on .156 center- lines for .062 thick single side printed circuit boards. The four MTA systems are also available preterminated to ribbon cable. MTA Ribbon Cable Assemblies are available and can be shipped ready for use in any length, with any number of circuits, in any wire size, and can be terminated with one or more connectors. Standard Features and Benefits m Four MTA Systems: MTA-100.100 centers, receptacles and headers MTA-156.156 centers, receptacles and headers MTA-156posted connector MTA-156card edge connector m Position Sizes: MTA-100Receptacles and headers for 2 through 28 positions MTA-156Receptacles and headers for 2 through 24 positions MTA-156Posted connec- tors for 2, 3, 4, 6, 9, 12, 15 and 24 positions MTA-156Card edge connectors for 3, 6, 9, 12, 15, 18, and 20 through 24 positions gw End stackable on MTA- 100 receptacles and headers and MTA-156 receptacles and headers m Receptacle styles include both closed-end and feed- thru, with and without polar- izing tab m Contacts are post lubri- cated to prevent fretting corrosion w Color coded housings: Orange- 18 AWG Yellow 20 AWG Red- 22 AWG Natural- 24 AWG Blue- 26 AWG Green- 28 AWG m Meets the material requirements to Table 23.1 of UL 1410 Standards for Television Receiver and Video Products* m Recognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 gw Certified by Canadian Standards Association File No. LR16455 @: *Minimum order quantities and extended !ead times may apply on special desired features. *Wire-to-post connectors only 3385 $J0}D9UUOD PJeOg INDIO palulid jyGo Printed Circuit Board Connectors MTA-100 Receptacles -100 Centers Color Coding by Wire Size: 28 AWGGreen 26 AWGBlue 24 AWGNatural 22 AWGRed Accepts insulation range of .060 dia. max. when termi- nating one wire at a time. Accepts insulation range of .050 dia. max. when mass terminating. Other features available upon request @ 000015 and .000030 gold plating @ Receptacle circuits molded closed for keying purposes M 28 and 26 AWG wire gauge in 15 to 28 position sizes in the receptacles without polarizing tabs @ Tape mounted recepta- cles available on reels Minimum order quantities and extended lead times may apply on special Specifications subject to change. For latest design specifications... 1-800-522-6752 Closed-End Without Polarizing Tab Closed-End With Polarizing Tab Material: Circuit #41 / Dimensioning: Dimensions are in inches 3386 desired features. Consult HousingThermoplastic 94V-2 For AMP products that mate AMP Incorporated, Harris- ContactsTin plated phosphor with these receptacles, see burg, PA 17105. bronze pages 3390 through 3393. Circuits Dim. Without Polarizing Tab With Polarizing Tab A 28 AWG 26 AWG 24 AWG 22 AWG 26 AWG 24 AWG 22 AWG 2 .200 640443-2 640442-2 640441-2 640440-2 643815-2 643814-2 643813-2 3 .300 640443-3 640442-3 640441-3 640440-3 643815-3 643814-3 643813-3 4 A400 640443-4 640442-4 640441-4 640440-4 643815-4 643814-4 643813-4 5 500 640443-5 640442-5 640441-5 640440-5 643815-5 643814-5 643813-5 6 600 640443-6 640442-6 640441-6 640440-6 643815-6 643814-6 643813-6 7 .700 640443-7 640442-7 640441-7 640440-7 643815-7 643814-7 643813-7 8 .800 640443-8 640442-8 640441-8 640440-8 643815-8 643814-8 643813-8 9 .900 640443-9 640442-9 640441-9 640440-9 643815-9 643814-9 643813-9 10 1.000 1-640443-0 1-640442-0 1-640441-0 1-640440-0 1-643815-0 1-643814-0 1-643813-0 11 1.100 1-640443-1 1-640442-1 1-640441-1 1-640440-1 1-643815-1 1-643814-1 1-643813-1 12 1.200 1-640443-2 1-640442-2 1-640441-2 1-640440-2 1-643815-2 1-643814-2 1-643813-2 13 1.300 1-640443-3 4-640442-3 1-640441-3 1-640440-3 1-643815-3 1-643814-3 1-643813-3 14 1.400 1-640443-4 4-640442-4 1-640441-4 1-640440-4 1-643815-4 1-643814-4 1-643813-4 15 1.500 1-640441-5 1-640440-5 1-643815-5 1-643814-5 1-643813-5 16 1.600 1-640441-6 1-640440-6 1-643815-6 1-643814-6 1-643813-6 17 1.700 1-640441-7 1-640440-7 1-643815-7 1-643814-7 1-643813-7 18 1.800 1-640441-8 1-640440-8 1-643815-8 1-643814-8 1-643813-8 19 1.900 1-640441-9 1-640440-9 1-643815-9 1-643814-9 1-643813-9 20 2.000 2-640441-0 2-640440-0 2-643815-0 2-643814-0 2-643813-0 21 2.100 = 2-640441-1 2-640440-1 2-643815-1 2-643814-1 2-643813-1 22 2.200 2-640441-2 2-640440-2 2-643815-2 2-643814-2 2-643813-2 23 2.300 2-640441-3 2-640440-3 2-643815-3 2-643814-3 2-643813-3 24 2.400 2-640441-4 2-640440-4 2-643815-4 2-643814-4 2-643813-4 25 2.500 2-640441-5 2-640440-5 2-643815-5 2-643814-5 2-643813-5 26 2.600 2-640441-6 2-640440-6 2-643815-6 2-643814-6 2-643813-6 27 2.700 = 2-640441-7 2-640440-7 2-643815-7 2-643814-7 2-643813-7 28 2.800 2-640441-8 2-640440-8 2-643815-8 2-643814-8 2-643813-8 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752Specifications subject to change. For latest design specifications... Bimensioning: in inches 1-800-522-6752 nea Feed-Thru Receptacie Without Polarizing Tabs Circuits Dim. Without Polarizing Tab 24 AWG 22 AWG 2 .200 640621-2 640620-2 3 300 640621-3 640620-3 4 400 640621-4 640620-4 5 .500 640621-5 640620-5 6 .600 640621-6 640620-6 7 .700 640621-7 640620-7 8 .800 640621-8 640620-8 9 .900 640621-9 640620-9 10 1.000 _1-640621-0 _1-640620-0 i 1.100 1-640621-1 640620-1 12 1.200 _1-640621-2 _1-640620-2 13 1,300 1-640521-3_1-640620-3 Circuit #1 t 14 1.400 _1-640621-4 _1-640620-4 . Other features available on request Minimum order quantities 000015 and .000030 gold plating and extended lead times Receptacle circuits molded closed for keying purposes may apply on special @ Tape mounted receptacles on reels desired features. Consult @ 28 AWG and 26 AWG wire gauge in 2 through 28 AMP Incorporated, Harris- position sizes and 24 AWG and 22 AWG wire gauge in 15 For AMP products that mate burg, PA 17105. through 28 position sizes with these receptacles, see pages 3390 through 3393. Closed-End Receptacle Feed-Thru Receptacle Special Connectors for .014-.020 Diameter or Square Leads Circuit #1 Wire Size Closed-End Receptacle Feed-Thru Receptacle AWG 2 Pos. 3 Pos. 2 Pos. 3 Pos. 28 641537-2 641537-3._641656-2 _641656-3 26 641536-2 641536-3 641655-2 _641655-3 Material: 24 641535-2 641535-3 _641654-2 _641654-3 HousingThermoplastic 94V-2 22 6415342 6415343 _641653-2 _641653-3 rated . . co ContactsTin plated phosphor Other sizes are available on request. Minimum order bronze quantities and extended lead times may apply. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 3387 SJOJ}DBUUOD PALO JINDID Payud IPRGo Printed Circuit Board Connectors MTA-100 Accessories Specifications subject to change. For latest design specifications... 1-800-522-6752 Dimensioning: Dimensions are in inches Closed-End Strain Relief Covers Material: Thermoplastic, 94V-2 rated, natural ~] Feed-Thru Strain Relief Covers Material: Thermoplastic, 94V-2 rated, natural Replacement Contacts Material and Finish: Tin plated phosphor bronze Stock Thickness: .0125 Closed-End Dust Covers Material: Thermoplastic, 94V-2 rated, natural \ ao NY Feed-Thru Dust Covers Material: Thermoplastic, 94-2 rated, natural g 8 \\- -130 > A 075 Strip yf | rated, natural Part No. 641994-1 c_. Note: Removal of contact is not necessary when using keying plug. Harrisburg, PA 17105. 3388 oEd] q Wire Size Part Numbers [| AWG Standard Connectors Special Connectors ee . 28 640639-1 641646-1 _ 26 640638-2 641645-1 24 640637-1 641644-1 125 22 640636-1 641643-1 1 Note: Contacts also available in .000015 and .000030 gold. Consult AMP Incorporated, j =o] 1) AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 Keying Plug with Carrier Materials: Thermoplastic, 94V-2Specifications subject to change. For latest design specifications... 1-800-522-6752 Strain Relief Covers and Dust Covers No. of Dim. Glosed-End ead Thru Closed-End Feed-Thru Circuits A Covers Covers Dust Covers Dust Covers 2 .200 643075-2 643077-2 _ 3 .300 643075-3 643077-3 640550-3 640642-3 4 400 643075-4 643077-4 640550-4 640642-4 5 .500 643075-5 643077-5 640550-5 640642-5 6 .600 6430756 643077-6 640550-6 640642-6 7 .700 643075-7 643077-7 640550-7 640642-7 8 .800 643075-8 643077-8 640550-8 640642-8 9 .900 643075-9 643077-9 640550-9 640642-9 10 1.000 1-643075-0 1-643077-0 1-640550-0 1-640642-0 W 1,100 1-643075-1 1-643077-1 1-640550-1 1-640642-1 12 1.200 1-643075-2 1-643077-2 1-640550-2 1-640642-2 13 1,300 1-643075-3 1-643077-3 1-640550-3 1-640642-3 14 1.400 1-643075-4 1-643077-4 1-640550-4 1-640642-4 15 1.500 1-643075-5 1-640550-5 ~ 16 1.600 1-643075-6 _ 1-640550-6 ~ 17 1.700 1-643075-7 _ 1-640550-7 _ 18 1.800 1-643075-8 1-640550-8 _ 19 1.900 1-643075-9 _ 1-640550-9 20 2,000 2-643075-0 = 2-640550-0 _ 21 2.100 2-643075-1 _ 2-640550-1 = 22 2.200 2-643075-2 2-640550-2 _ 23 2.300 2-643075-3 _ 2-640550-3 24 2.400 2-643075-4 = 2-640550-4 _ 25 2.500 2-643075-5 = 2-640550-5 26 2.600 2-643075-6 _~ 2-640550-6 27 2.700 2-643075-7 = 2-640550-7 28 2.800 2-643075-8 2.643077-8 2-640550-8 2.640642-8 Feed-thru covers for 15 through 27 position sizes are available on request Minimum order quantities and extended lead times may apply on special requests. Consult AMP Incorporated, Harrisburg, PA 17105. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 4-800-522-6752 3389 S1OJQBUOD PJeOg UNIO Pauld PRit) Printed Circuit Board Connectors MTA-100 Post Headers -100 Centers, .200 Wide Flat Header 3390 No. of Dim. Positions A 200 300 400 500 600 700 -800 900 1.000 1.100 1,200 1.300 1.400 Straight Post (.025 Square) Part Numbers : 640452-2 640452-3 640452-4 640452-5 _ 640452-6 640452-7__ 640452-8 640452-9 _ 1-640452-0__ 1-640452-1 1-640452-2_ 4-840452-3 _ 1-640452-4__ Specifications subject to change. For latest design specifications... Dimensioning: 1-800-522-6752 Dimensions are in inches Right Angle Post (.025 Square) -200 Post #1 l ( @ @ \ 1 100 Typ. _ Ae t @ | ~ soe .050/.040 Dia. Recommended Mounting Hole Size for a 1/16 Thk. Pc Board Other features available on request No.of Dim. | Part @ .000015 and .000030 gold plating Positions ___A___Numbers_ H@ Posi(s) can be omitted for keying purposes. Specify the 2.200 6404532 desired post(s) to be omitted using the figure above 3 ne identifying Post #1 5 =00 @ 15 through 28 position sizes also available 6.600 Minimum order quantities and extended lead times may __ 7 ___ 7006 40453-7 | apply on desired special features. Consult AMP Incorporated, 3 Harrisburg, PA 17105. To 1.000 For AMP products that mate with these headers, see pages i 1.100 3386 and 3387. 12 1.200 13 1,300 14 1,400 Material: HousingPolyester 94V-0 rated, natural Posts-tTin plated copper alloy Part Numbers 640453-3 640453-4 : 640453-5 640453-6 640453-8 640543-9 1-640453-0 1-640453-1 1-640453-2 1-640453-3 1-640453-4 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752MTA-100 Post Header -100 Centers, .095 Wide Narrow Flat Header Straight Post (.025 Square) No. of A Part Positions Dim. Numbers 2 .200 643802-2 3 300 643802-3 4 .400 643802-4 5 500 643802-5 6 -600 643802-6 7 -700 643802-7 8 .800 643802-8 9 -900 643802-9 10 1.000 1-643802-0 Lal 1.100 1-643802-1 12 1.200 _1-643802-2 13 1.300 1-643802-3 14 1.400 1-643802-4 15 1.500 1-643802-5 16 1.600 1-643802-6 17 1.700 1-643802-7 18 1.800 1-643802-8 19 1.900 _1-643802-9 20 2.000 2-643802-0 21 2.100 2-643802-1 22 2.200 _2-643802-2 23 2.300 2-643802-3 24 2.400 _2-643802-4 25 2.500 _2-643802-5 26 2.600 2-643802-6 27 2.700 _2-643802-7 28 2.800 2-643802-8 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 Specifications subject to change. For latest design specifications... 1-800-522-6752 Post #1 oa i ft 1 tt poe et NC | op -100 Typ. .050/.040 Dia. Recommended Mounting Hole Size for a 1/16 Thk. Pe Board For AMP products that mate with these headers, see pages 3386 and 3387. Material: HousingPolyester 94V-0 rated, natural PostsTin plated copper alloy Dimensioning: Dimensions are in inches Right Angle Post (.025 Square) No. of Positions Dim. A -200 -300 -400 2.100 2.200 2.300 2.400 2.500 2.700 2.800 Part Numbers 643163-2 643163-3 643163-4 643163-5 643163-6 642163-7 643163-8 643163-9 1-643163-0 1-643163-1 1-643163-2 1-643163-3 1-643163-4 1-643163-5 1-643163-6 1-643163-7 1-643163-8 1-643163-9 2-643163-0 2-643163-1 2-643163-2 2-643163-3 2-643163-4 2-643163-5 2-643163-6 2-643163-7 2-643163-8 3391 SJOJNOUUD Pseog NII Peuld PPBSo Printed Circuit Board Connectors AMP MTA-100 Post Headers .100 Centers Polarized Header with Polarizing Notches Straight Post (.025 Square) Post #1 i 100 Typ. = be Recommended Mounting Hole Size for a 1/16 Thk. Pc Board No. of Dim. Part Positions A Numbers 2 .200 640454-2 3 300 640454-3 4 400 640454-4 5 500 640454-5 6 800 640454-6 7 .700 640454-7 8 .800 640454-8 g .900 640454-9 10 1,000 1-640454-0 11 1.100 1-640454-1 12 1.200 1-640454-2 13 1.300 1-640454-3 14 1.400 1-640454-4 15 1.500 1-640454-5 16 1.600 1-640454-6 17 4.700 _ 1-640454-7 18 1.800 1-640454-8 19 1.900 1-640454-9 20 2.000 2-640454-0 21 2.100 2-640454-1 22 2.200 2-640454-2 23 2,300 2-640454-3 24 2.400 2-640454-4 25 2.500 2-640454-5 26 2.600 2-640454-6 27 2.700 2-640454-7 28 2.800 _2-640454-8 3392 Specifications subject to change. For latest design specifications... 1-800-522-6752 -176 Max. to edge of board .050/.040 Dia. Other features available on request M .000015 and .000030 gold plating @ Posi(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure above identifying Post #1 Minimum order quantities and extended lead times may apply on desired special features. Consult AMP Incorporated, Harrisburg, PA 17105. For AMP products that mate with these headers, see pages 3386 and 3387. Material: HousingPolyester 94V-0 rated, natural PostsTin plated capper alloy Right Angle Post (.025 Square) Post #1 A & Dimensioning: Dimensions are in inches 140 Recommended Mounting Hole Size for a 1/16 Thk. Pc Board 225 - ,050/.040 Dia. No. of Dim. Part Positions A Numbers 2.200 640455-2 3 .300 640455-3 4 -400 $40455-4 5 500 640455-5 6 600 640455-6 7 .700 640455-7 8 -800 640455-8 9 900 640455-9 __10 __*1,000_~*11-640455-0 11 1.100 _1-640455-1 12 1.200 1-640455-2 13 1.300 _1-640455-3 14 1.400 1-640455-4 15 1.500 1-640455-5 16 1.600 1-640455-6 17 1.700 1-640455-7 18 1.800 1-640455-8 19 1.900 _ 1-640455-9 20 2.000 2-640455-0 21 2.100 2-640455-1 22 2.200 2-640455-2 23 2.300 _2-640455-3 24 2.400 _2-640455-4 25 2.500 2-640455-5 26 2.600 2-640455-6 27 2.700 2-640455-7 28 2.800 _2-640455-8 AMP INCORPORATED, HARRISBURG, PA 17105: PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752MTA-100 Post Header .100 Centers Specifications subject te change. For latest design specifications... 1-800-522-6752 Dimensioning: Dimensions are in inches Friction Lock Header with Polarizing Notches Straight Post (.025 Square) 225 310 Post #1 A & -100 100 Typ. 050/.040 Dia. Recommended Mounting Hole Size for a 1/16 Thk. Pc Board Right Angle Post (.025 Square) 225 -140 -175 Max. to 7 .050/.040 Dia. edge of board , Recommended Mounting Hole Size for a 1/16 Thk. Pc Board Other features available on request No. of Dim. Part No. of Dim. Part Positions A Numbers @ .000015 and .000030 gold plating Positions A Numbers 2 200 __640456-2 @ Post(s) can be omitted for keying purposes. Specify the 2 200 __640457-2 3 300 _640456-3 desired post(s) to be omitted using the figure above 3 300__640457:3 4 400 _ 640456-4 identifying Post #1 4 400 _640457-4 5 500 640456-5 5 500 640457-5 6 600 640456-6 Minimum order quantities and extended lead times may 6 600 _640457-6 7 700 640456-7 apply on desired special features. Consult AMP Incorporated, 7 700-6 40457-7 8 .800 640456-8 Harrisburg, PA 17105. 8 -800 640457-8 9 900 _ 640456-9 ; 9 900 _ 640457-9 10 1.000 1-640456-0 For AMP products that mate with these headers, see pages 10 1.000 1-640457-0 11 1.100 _ 1-640456-1 3386 and 3387. 1 1.100 1-640457-1 12 1.200 _1-640456-2 12 1.200 1-640457-2 13 1.300 1-640456-3 13 1.300 _1-640457-3 14 1.400 1-640456-4 14 1.400 _ 1-640457-4 15 1.500 _1-640456-5 15 1.500 1-640457-5 16 1.600 1-640456-6 16 1.600 _ 1-640457-6 17 1.700 1-640456-7 17 1.700 _1-640457-7 18 1.800 1-640456-8 18 1.800 _1-640457-8 19 1.900 _ 1-640456-9 19 1.900 _ 1-640457-9 20 2.000 2-640456-0 20 2.000 _2-640457-0 21 2.100 2-640456-1 21 2.100 2-640457-1 22 2.200 2-640456-2 22 2.200 _ 2-640457-2 23 2.300 _2-640456-3 23 2.300 2-640457-3 24 2.400 2-640456-4 24 2.400 _2-640457-4 25 2.500 2-640456-5 25 2.500 _2-640457-5 26 2.600 2-640456-6 26 2.600 2-640457-6 27 2.700 _2-640456-7 27 2.700 _2-640457-7 28 2.800 2-640456-8 238 2.800 _2-640457-8 Material: HousingPolyester 94V-0 rated, natural PostsTin plated copper alloy AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 3393 S1O}Q9UUOD P1eOg NID palulid PPRAMP MTA-156 Receptacles .156 Centers Color Coding by Wire Size: Specifications subject to change. For latest design specifications... 1-800-522-6752 Dimensioning: Dimensions are in inches Closed End With Lock, Without Polarizing Tab wt) Printed Circuit Board Connectors 24 AWGNatural 22 AWGRed 20 AWGYellow 18 AWGOrange Accepts insulation range of .095 dia. max. when termi- nating one wire at a time. Accepts insulation range of .070 dia. max. when mass terminating. Other features available upon request @ .000015 and .000030 gold plating Circuit #1 l i @ Receptacle circuits Material: molded closed for keying .280 HousingThermopiastic 94V-2 purposes rated Closed End With Lock, With Polarizing Tab Contacts-Tin plated phosphor SK bronze 245 aA A eo @ Tape mounted recepta- cles available on reels Minimum order quantities and extended lead times may apply on special desired features. Consult AMP Incorporated, Harris- burg, PA 17105. Ss For AMP products that mate with these receptacles, see pages 3398 and 3400, and 3401 (without tab only). Circuit #1 _/+ No. of Dim. Without Polarizing Tab With Polarizing Tab Circuits A 24 AWG 22 AWG 20 AWG 18 AWG 24 AWG 22 AWG 20 AWG 18 AWG 2 312 640429-2 ea otae Ss 640427-2 Baoan 643820-2 643819-2 643818-2 643817-2 3 468 640429-3 atone 640427-3 Bag 26-3 643820-3 643819-3 643818-3 643817-3 4 624 640429-4 oaoree ae 640427-4 eaotae4 643820-4 643819-4 643818-4 643817-4 5 780 640429-5 oa tone 640427-5 Bagt26 5 643820-5 643819-5 643818-5 643817-5 6 936 640429-6 eaoaees 640427-6 oa 126-6 643820-6 643819-6 643818-6 643817-6 7 1.092 640429-7 640428-7 640427-7 640426-7 643820-7 643819-7 643816-7 643817-7 8 1.248 640429-8 640428-8 640427-8 640426-8 643820-8 643819-8 643818-8 643817-8 9 1.404 640429-9 640428-9 640427-9 640426-9 643820-9 643819-9 643818-9 643817-9 10 1.560 _1-640429-0 __1-640428-0 1-640427-0____1-640426-0 1-643820-0 _1-643819-0 __1-643816-0 _1-643817-0 rr 1716 __1-640429-1__1-640428-1 4-640427-1 __1-640426-1 1-643820-1 _1-643819-1___1-643818-1___1-643817-1 12 1.872 1-640429-2 __1-640428-2 1-640427-2 __1-640426-2 1-643820-2 _1-643819-2 _1-643818-2__1-643817-2 43 2.028 = = = 1-640426-3 1-643820-3 _1-643819-3 __1-649818-3___1-643817-3 14 2.184 = = = 1-640426-4 1-643820-4 __1-643819-4 __1-643818-4 __1-643817-4 15 2.340 = = _ 1-640426-5 1-643820-5 16438195 __1-643818-5 _1-643817-5 16 2.496 = = = 1-640426-6 16438206 _1-643819-6 _1-643818-6 __1-643817-6 7 2.652 = = = 1-640426-7 1-643821-7____1-643819-7___1-643818-7___1-643817-7 18 2.808 = = = 1-640426-8 1-643821-8 __1-643819-8 _1-6438188 _1-643817-8 19 2.964 = = = 1-640426-9 1-643821-9 _1-643819-9 _1-643818.9 _1-643817-9 20 3.120 = = = 2-640426-0 2-643821-0 _2-643819-0 __2-643818-.0 _2-649817-0 24 3.276 = = = 2-640426-1 2-643821-1 __2-643819-1 _2-643818-1 __2-643817-1 22 3.432 = = = 2-640426-2 2-643821-2 _2-643819-2 _2-643818-2 _2-643817-2 23 3.588 = = = 2-640426-3 2-643821-3 _2-643819-3__2-6438183 _2-649817-3 24 3,744 = = = 2-640426-4 2-643821-4 __2-643819-4 __2-649818-4___-2.643817-4 *High force connectors Note: Closed-end receptacles with lock and with or without polarizing tabs are available in 13 through 24 position sizes. 3394 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752Specifications subject to change. For latest design specifications... 1-800-522-6752 Dimensioning: Dimensions are in inches Closed End Without Lock, Without Polarizing Tabs Circuit #1 4 24, 22, and 20 AWG wire gauge receptacles in 13 through 24 position sizes are also available on request. For AMP products that mate with these receptacles, see pages 3398 and 3399. Feed-thru With Lock, Without Polarizing Tabs -280 Circuit #1 / No. of Dim. Circuits A 22 AWG 18 AWG 2 312 640601-2 640599-2 3 .468 640601-3 640599-3 4 624 640601-4 640599-4 5 780 640601-5 640599-5 6 936 640601-6 640599-6 7 1.092 640601-7 640599-7 8 1.248 640601-8 640599-8 9 1.404 640601-9 640599-9 10 1.560 1-640601-0 1-640599-0 11 1.716 1-640601-1 1-640599-1 12 1.872 1-640601-2 1-640599-2 Other features available on request M@ High force tin plated receptacles in 2 through 6 position sizes only M 22 and 18 AWG wire gauge receptacles in 13 through 24 position sizes M@ 24 and 26 AWG wire gauge receptacles in 2 through 24 position sizes For AMP products that mate with these receptacles, see pages 3398, 3400 and 3401. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 No. of Dim. Circults A 24 AWG 22 AWG 20 AWG 18 AWG 2 312 640434-2 640433-2 640432-2 640431-2 3 468 640434-3 640433-3 640432-3 640431-3 4 624 640434-4 640433-4 640432-4 640431-4 5 780 640434-5 640433-5 640432-5 640431-5 6 936 640434-6 640433-6 640432-6 640431-6 7 1.092 640434-7 640433-7 640432-7 640431-7 8 1.248 640434-8 640433-8 640432-8 640431-8 9 1.404 640434-9 640433-9 640432-9 640431-9 10 1.560 1-640434-0 1-640433-0 1-640432-0 1-640431-0 11 1.716 1-640434-1 1-640433-1 1-640432-1 1-640431-1 12 1.872 1-640434-2 1-640433-2 1-640432-2 1-640431-2 13 2.028 - _ _ 1-640431-3 14 2.184 _ - = 1-640431-4 15 2.340 = = _ 1-640431-5 16 2.496 ~ - =_ 1-640431-6 17 2.652 _ _ = 1-640431-7 18 2.808 ed = _ 1-640431-8 19 2.964 = = _ 1-640431-9 20 3.120 = _ = 2-640431-0 21 3.276 _ = _ 2-640431-1 22 3.432 =- - _ 2-640431-2 23 3.588 = - =- 2-640431-3 24 3.744 = = = 2-640431-4 Feed-Thru Without Lock, Without Polarizing Tabs 725 .230 / Circuit #1 No. of Dim. Circuits A 24 AWG 18 AWG 2 312 640607-2 640604-2 3 468 640607-3 640604-3 4 -624 640607-4 640604-4 5 -780 640607-5 640604-5 6 .936 640607-5 640604-6 7 1.092 640607-7 640604-7 8 1.248 640607-8 640604-8 9 1.404 640607-9 640604-9 10 1.560 1-640607-0 1-640604-0 11 1.716 1-640607-1 1-640604-1 12 1.872 1-640607-2 1-640604-2 Also available on request M 24 and 18 AWG wire gauge receptacles in 13 through 24 position sizes @ 22 and 20 AWG wire gauge receptacles in 2 through 24 position sizes. For AMP products that mate with these receptacles, see pages 3398 and 3399. 3395 SIOJOBUUOD PseOg HNUID Peud PFws) Printed Circuit Board Connectors AMP MTA-156 Accessories Specifications subject to change. For latest design specifications... 1-800-522-6752 Dimensioning: Dimensions are in inches Closed-End Strain Relief Covers Material: Thermoplastic, 94V-2 rated, natural Feed-Thru Strain Relief Covers Material: Thermoplastic, 94V-2 rated, natural Replacement Contacts Material and Finish: Tin plated phosphor bronze Stock Thickness: .0125 1 637. Note: Contacts also available in .000015 and .000030 gold. Contact AMP Incorpo- rated, Harrisburg, PA 17105. 3396 Wire Size Part AWG Numbers 24 640634-2 22 640633-2 20 640632-2 18 640631-2 Closed-End Dust Covers Material: Thermoplastic, 94V-2 rated, natural 2 A Feed-Thru Dust Covers Material: Thermoplastic, 94V-2 rated, natural wa <A SS Loose Piece Keying Plugs A Part No. 640630-1 (long nose) Used with Staked Posts B Part No. 640629-1 (flush) Used with Keyed Headers _ Keying Plug on Carrier Strip C Part No. 641623-1 (flush) Keying Plug on Carrier Strip (10 per strip) 500 -< > <+) .070 Dia. Note: Removal of contact is not necessary when using keying plug Material: Thermoplastic, 94V-2 rated, natural AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752Specifications subject to change. For latest design specifications... 1-800-522-6752 MTA-156 Accessories Dimensioning: Dimensions are in inches Strain Relief Covers and Dust Covers Closed-End Strain Relief Covers Feed-Thru Strain Relief Covers Closed-End Strain Relief Covers for 13 through 23 position sizes are available No.of Dim. .065 Max.0.D. .095 Max O.D. .065 Max. 0.D. .095MaxO.D. Closed-End Feed-Thru Circuits A _94V-2 (Black) 94V-2 (Natural) 94V-2 (Black) 94-2 (Natural) Dust Covers Dust Covers on request a bo4 480684 84808 = BiS07L-4edOso1a anes | CONCTS for 2 through 23 5 .780 643069-5 643067-5 643071-5 640551-5 640643-5 position sizes are available 6.936 _643069-6 643067-6 _ 643071-6 640551-6 6406436 upon request 7 1.092 643069-7 643067-7 _ 643071-7 640551-7 640643-7 Feed-Thru Dust Covers for 8 1.248 643069-8 643067-8 643071-8 640551-8 640643-8 13 through 23 position sizes 9 1,404 643069-9 643067-9 643071-9 640551-9 640643-9 are available upon request 10 1.560 _1-643069-0 1-643067-0 1-643071-0 1-640551-0 _1-640643-0 14 1.716 _1-643069-1 1-643067-1 1-643071-1 1-640551-1 _1-640643-1 Minimum order quantities 12 1.872 _ 1-643069-2 1-643067-2 _ 4-643071-2 1-640551-2 _1-640643-2 and extended lead times 13. 2.028 1-643067-3 = 4-643071-3 1-640551-3 may apply on special 14 2.184 1-643067-4 1-643071-4 1-640551-4 requests. 15 2.340 1-643067-5 _ 1-643071-5 1-640551-5 162.496 = 1-643067-6 1-643071-6 __1-640551-6 Consult AMP incorporated, 172.652 = 4-643067-7 1-643071-7 1-640551-7 Harrisburg, PA 17105. 18 2.808 1-643067-8 1-643071-8 1-640551-8 19 2.964 1-643067-9 1-643071-9 1-640551-9 20 3.120 2-643067-0 2-643071-0 2-640551-0 ~ 21 3.276 2-643067-1 2-643071-1 2-640551-1 22 3.432 2-643067-2 ~ 2-643071-2 2-640551-2 233.588 2-643067-3 2-643071-3 2-640551-3 = 24 3.744 _-2-643069-4 2-643067-4 2-643072-4 2-643071-4 2-640551-4 _2-640643-4 Panel Mounting End Cap (2 Pos. Only) Material: Thermoplastic 94V-2 rated, black Part No. 641533-1 e- 578 Panel Mounting End Caps Material: Thermoplastic 94V-2 rated, black Part No. 641440-1 No. of Dim. Positions A 3 .736 4 .892 6 1.204 9 1.672 12 2.140 16 2.608 24 4.012 Both left hand and right hand end caps are attached A A a = by a connecting tab. This 453 , tab must be broken off prior to installing on receptacle. .010 Max. Ri Typ. at Min. tolerance cutout Recommended Panel Cutout Panel Thickness .062 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 .010 Max. Ri Typ. at Min. tolerance cutout Recommended Pane! Cutout Panel Thickness .062 Panel mounting end caps can be attached to the posted connector or the receptacle. For best results attach end caps to the receptacle. 3397 SIOJIBUUOD PleOg WNUID palulid FeGo Printed Circuit Board Connectors Specifications subject to change. MTA-156 Post Headers For latest design specifications... Dimensioning: . 1 56 Centers 1-800-522-6752 Dimensions are in inches Flat Header Straight Post (.045 Square and Round) Right Angle Post (.045 Square) Post #1 .080/.070 Dia. (640383; 640385) .070/.080 Dia. (640384) a / | | | i _ | OFOOOOOO | eee 156-4 Recommended Mounting Hole Size for a 1/16 Thk. Pe Board No. of Dim. No. of Dim. Part Positions A Square Posts Round Posts Positions A Numbers 2 312 640383-2 640384-2 2 312 640385-2 3 AGB 6403833 640384-3 3 468 640385-3 4 624 _640383-4 640384-4 4 624 640385-4 5 780 640383-5 640384-5 5 780 640385-5 6 936 640383-6 640384-6 6 .936 640385-6 7 1.092 640383-7 640384-7 7 1,092 640385-7 8 1,248 -640383-8 640384-8 8 1.248 640385-8 9 1.404 640383-9 640384-9 9 1.404 640385-9 10 __*1,560 ~1-640383-0 _+1-640384-0 10 1.560 1-640385-0 11 1.716 _1-640383-1 __1-640384-1 "1 1.716 1-640385-1 12 1.872 1-640383-2 _1-640384-2 12 1.872 1-640385-2 132.028 1-640383-3 = 13 2.028 1-640385-3 14 2.184 1-640383-4 = 14 2.184 1-640385-4 15 2.340 _1-640383-5 = 15 2.340 1-640385-5 16 2.496 _-1-640383-6 _ 16 2.496 1-640385-6 17___2.652__:1-640383-7 = 17 2.652 1-640385-7 18 _2.808 _1-640383-8 = 18 2.808 1-640385-8 19 -2.964__1-640383-9 = 19 2.964 1-640385-9 20 3.120 _2-640383-0 = 20 3.120 2-640385-0 21 3.276 _2-640383-1 21 3.276 2-640385-1 223.432 ~-2-640383-2 _ 22 3.432 2-640385-2 23 3,588 2-640383-3 _ 23 3.588 2-640385-3 24 3,744 _2-640383-4 24 3.744 2-640385-4 Material: Other features available on request HousingPolyester 94V-0 rated, .000015 and .000030 gold plating Minimum order quantities natural * . : . P . @ Post(s) can be omitted for keying purposes. Specify the and extended lead times astsTin plated copper alloy . . : . : desired post(s) to be omitted using the figure above may apply on desired For AMP products, that mate identifying Post #1 special features. Consult with these headers, see @ 13 through 24 position sizes in the round and straight AMP Incorporated, Harris- pages 3394 and 3395. post flat header burg, PA 17105. 3398 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752Specifications subject to change. MTA-156 Post Header For latest design specifications... Dimensioning: . 1 56 Centers 1-800-522-6752 Dimensions are in inches Polarized Header with Polarizing Notches Straight Post (.045 Square and Round) Right Angle Post (.045 Square) Post #1 P t =. . .080/.070 Dia. 3 .080/.070 Dia. (640444) oO .070/.060 Dia. (640386) i o. ; .530 Max. to oO | | | edge of pc board = -9-0-0 _ F Q Ne | | fol -_ 156-0 = w 7 Recommended Mounting Hole Size Recommended Mounting Hole Size 2 for a 1/16 Thk. Pe Board for a 1/16 Thk. Pe Board a Oo o No. of Dim. No. of Dim. Part 3 Positions A Square Posts Round Posts Positions A Numbers o 2 312: 640444-2 640386-2 2 312 640387-2 oO 3 468 640444-3 640386-3 3 468 640387-3 Oo 4 624 _640444-4 640386-4 4 624 640387-4 = 5 780: 640444-5 640386-5 5 .780 640387-5 @ 6 936 640444-6 640386-6 6 .936 640387-6 71.092 -640444.7 640386-7 7 1.092 640387-7 8 1.248 _640444-8 640386-8 8 1.248 640387-8 9 1.404 _640444-9 640386-9 9 1.404 640387-9 10 1.560 1-640444-0 _1-640386-0 10 1.560 1-640387-0 i 1.716 1-640444-1_1-640386-1 1 1.716 1-640387-1 12 1.872 _1-640444.2 _1-640386-2 12 1.872 1-640387-2 132.028 ~:1-640444-3 _ 13 2.028 1-640387-3 14 2.184 1-640444-4 = 14 2.184 1-640387-4 15 2.340 _1-640444-5 _ 15 2.340 1-640387-5 16 2.496 1-640444-6 16 2.496 1-640387-6 172.652 1-640444.7 = 17 2.652 1-640387-7 18 2.808 _1-640444-8 ~ 18 2.808 1-640387-8 19 2.964 1-640444-9 = 19 2.964 1-640387-9 203.120 2-640444-0 _ 20 3.120 2-640387-0 21 3.276 _2-640444-1 _ 21 3.276 2-640387-1 22 3.432 ~-2-640444-2 22 3.432 2-640387-2 23 3.588 _-2-640444.3 23 3.588 2-640387-3 24 3.744 -2-640444-4 2-6 40386-4 24 3.744 2-640387-4 Material: HousingPolyester 94V-0 rated, Other features available on request natural @ .000015 and .000030 gold plating Minimum order quantities PostsTin plated copper alloy Post(s) can be omitted for keying purposes. Specify the and extended lead times For AMP products that mate desired post(s) to be omitted using the figure above may apply on desired with these headers, see identifying Post #1 special features. Consult page 3395 (receptacles @ 13 through 23 position sizes in the round straight post AMP Incorporated, Harris- without lock only). polarized header are aiso available burg, PA 171085. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 3399at) Printed Circuit Board Connectors MTA-156 Post Header -156 Centers Friction Lock Header with Polarizing Notches Straight Post (.045 Square Post #1 Recommended for a 1/16 Thk. Pc Board Specifications subject to change. For latest design specifications... 1-800-522-6752 and Round) Dimensioning: Dimensions are in inches Right Angle Post (.045 Square) Mounting Hole Size .080/.070 Dia. (640445) -080/.070 Dia. .070/.060 Dia. (640388) -450 Max. to edge : \ of pe board -O-O-0 O--, _+ i i 156 156 Recommended Mounting Hole Size for a 1/16 Thk. Pc Board Material: HousingPolyester 94V-0 rated, natural PostsTin plated copper alloy For AMP products that mate with these headers, see pages 3394 and 3395. 3400 No. of Dim. No. of Dim. Part Positions A Square Posts Round Posts Positions A Numbers 2 312 640445-2 640388-2 2 -312 640389-2 3 468 640445-3 640388-3 3 -468 640389-3 4 624 640445-4 640388-4 4 624 640389-4 5 -780 640445-5 640388-5 5 -780 640389-5 6 936 640445-6 640388-6 6 -936 640389-6 7 1.092 640445-7 640388-7 7 1.092 640389-7 8 1.248 640445-8 640388-8 8 1.248 640389-8 9 1.404 640445-9 640388-9 9 1.404 640389-9 10 1.560 _1-640445-0 1-640388-0 10 1.560 1-640389-0 11 1.716 1-640445-1 1-640388-1 11 1.716 1-640389-1 12 1.872 1-640445-2 1-640388-2 12 1.872 1-640389-2 13 2.028 _1-640445-3 1-640388-3 13 2.028 1-640389-3 14 2.184 1-640445-4 1-640388-4 14 2.184 1-640389-4 15 2.340 1-640445-5 1-640388-5 15 2.340 1-640389-5 16 2.496 _ 1-640445-6 1-640388-6 16 2.496 1-640389-6 17 2.652 1-640445-7 1-640388-7 17 2.652 1-640389-7 18 2.808 __1-640445-8 1-640388-8 18 2.808 1-640389-8 19 2.964 _ 1-640445-9 1-640388-9 19 2.964 1-640389-9 20 3.120 2-640445-0 2-640388-0 20 3.120 2-640389-0 21 3.276 _-2-640445-1 2-640388-1 21 3.276 2-640389-1 22 3.432 -2-640445-2 2-640388-2 22 3.432 2-640389-2 23 3.588 _-2-640445-3 2-640388-3 23 3.588 2-640389-3 24 3.744 2-640445-4 2-640388-4 24 3.744 2-640389-4 Note: Friction Lock Headers must be used with connectors with locking ramps. Other features available on request @ .000015 and .000030 gold plating @ Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure above identi- fying Post #1 Minimum order quantities and extended lead times may apply on desired special features. Consult AMP Incorporated, Harris- burg, PA 17105. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752AMP MTA-156 Cable-to-Cable Posted Connectors .156 Centers Color Coding by Wire Size: 24 AWGNatural 22 AWGRed 20 AWGYellow 18 AWGOrange Accepts insulation range of .095 dia. max. when termi- nating one wire at a time. Accepts insulation range of .070 dia. max. when mass terminating. Material: HousingThermoplastic 94V-2 rated ContactsTin plated copper alloy Other features available upon request BM .000015 and .000030 gold plating M 24, 20 and 18 AWG wire gauge connectors in 2, 3, 4, 6, 9, 12, 15 and 24 position sizes are also available @ MTA-156 Closed-End Strain Relief Covers or Dust Covers can be used on this connector. See Page 3396 Minimum order quantities and extended lead times may apply on special desired features. Consult AMP Incorporated, Harris- burg, PA 17105. For AMP products that mate with these receptacles, see pages 3394 through 3395. Note: Panel mounting end caps are available for use when mating a closed end receptacle with the cable-to-cable posted connectors. See page 3397. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: Specifications subject to change. For latest design specifications... 1-800-522-6752 Dimensioning: Dimensions are in inches Circuit #1 No. of Dimensions Circuits A B 22 AWG 2 468 312 641437-2 3 624 -468 641437-3 4 .780 624 641437-4 6 1.092 -936 641437-6 9 1.560 1.404 641437-9 12 2.028 1.872 1-641437-2 15 2496 2.340 1-641437-5 24 3.900 3.744 2-641437-4 Replacement Contacts Part No. 641427-1 126 | T==s5 a" co Aare ) + + .840 Material and Finish: Tin plated copper alloy Stock Thickness: .012 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 3401 S10}D@UUOD PAkOg NID pejuld PPRot) Printed Circuit Board Connectors AMP MTA-156 Card Edge Closed End Connectors Note: All dimensions shown on connec- tor without mounting ears apply to connector with mounting ears. With Mounting Ears Without Mounting Ears Color Coding by Wire Size: 24 AWGNatural 22 AVGRed Accepts insulation range of .095 dia. max. when termi- nating one wire at a time. Accepts insulation range of .070 dia. max. when mass terminating. Material: HousingThermoplastic 94V-0 natural ContactsTin plated .0125 phosphor bronze 3402 Specifications subject to change. For latest design specifications... Dimensioning: Dimensions are in inches 1-800-522-6752 No. of Dimensions Circuits A B c D 24 AWG" 22 AWG** 3 500 926 1.248 624 640867-3 640861-3 6 -968 1.394 1.716 1.092 640867-6 640861-6 9 1.436 1.862 2.184 1.560 640867-9 640861-9 12 1.904 2.330 2.652 2.028 1-640867-2 1-640861-2 15 2.372 2.798 3.120 2.496 1-640867-5 _1-640861-5 18 2.840 3.266 3.588 2.964 1-640867-8 _1-640861-8 20 3.152 3.578 3.900 3.276 _2-640867-0 _2-640861-0 21 3.308 3.734 4.056 3.432 2-640867-1 2-640861-1 22 3.464 3.890 4.212 3.588 2-640867-2 2-640861-2 23 3.620 4.046 4368 3.744 2-640867-3 _ 2-640861-3 24 3.776 4.202, 4.524 3.900 2-640867-4 _ 2-640861-4 *With mounting ears **Without mounting ears No. of Dim. Circuits A 3 484 : 6 -952 -100 Min. Typ. ! e Az 005 | 9 1.420 l 7 188 Te 015 + 005 12. 1.888 ~~ i x 45 Chamfer 15 2.556 both sides 18 2.824 WI ae 20 3.136 A Circuitry Side ~ 812 + 008 213.292 (PC Board 22. 3.448 Width) os + 090 Min. 23 3.604 24 3.760 Recommended Pc Board Layout for 1/16 Thk. Pc Board Connector Accessories Standard Cover Part Numbers: 4 Replacement Contacts Material and Finish: Tin plated phosphor bronze Stock Thickness: .0125 24 AWG wire size640994-1 22 AWG wire size640993-1 126 |. 609 oa , -100 Material: Thermoplastic 94V-2 No. of Dim. Part 130 rated, natural Circuits A Numbers 3 504 641106-3 Interconnect Keying Plug 6 972 641106-6 Material: Thermoplastic 94V-2 9 1.440 641106-9 rated, natural 12 1.908 1-641106-2 Part Number: 583274-1 15 2.376 1-641106-5 18 2.844 1-641106-8 20 3.156 2-641106-0 wy 585 21 3.312 2-641106-1 22 3.468 _-2-641106-2 rT 23 3.624 2-641106-3 24 3.780 _-2-641106-4 -100 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752SL.156 Wire-to-Board Receptacle Housing Assemblies .156 Centers Housing with and without Locking Ramp Material: Thermoplastic, 94V-0 rated Accepts contact No. 640252-1 for 1 through 12 positions and contact No. 350980-1 for 13 through 24 positions. Max. allowable bow to be .005 per inch of housing Recognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 A Note: Accepts either .045 square or round posts. Housings with locking tamps mate with headers shown on pages 3398 and 3400. Housings without locking ramps mate with headers shown on pages 3398 and 3399. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 Specifications subject to change. For latest design specifications... 1-800-522-6752 Dimensioning: Dimensions are in inches With Locking Ramp Without Locking Ramp Part Numbers No. of Dim. With Without Positions A Locking Ramp Locking Ramp 1 -152 640250-1 640251-1 2 -308 6402502 640251-2 3 -465 640250-3 640251-3 4 -620 640250-4 640251-4 5 777 640250-5 640251-5 6 -933 640250-6 640251-6 7 1.090 640250-7 640251-7 8 1.246 640250-8 640251-8 9 1.402 640250-9 640251-9 10 1.558 1-640250-0 1-640251-0 11 1.715 1-640250-1 1-640251-1 12 1.871 1-640250-2 1-640251-2 13 2.027 1-640250-3 1-640251-3 14 2.183 1-640250-4 1-640251-4 15 2.340 1-640250-5 1-640251-5 16 2.496 1-640250-6 1-640251-6 17 2.652 1-640250-7 1-640251-7 18 2.808 1-640250-8 1-640251-8 19 2.965 1-640250-9 1-640251-9 20 3.121 2-640250-0 2-640251-0 21 3.277 2-640250-1 2-640251-1 22 3.433 2-640250-2 2-640251-2 23 3.590 2-640250-3 2-640251-3 24 3.746 2-640250-4 2-640251-4 3403 $10}99UUOD PJeOg JINIID palulid IPRGS Printed Circuit Board Connectors Specifications subject to change. SL.156 For latest design specifications... Board-to-Board Receptacle 1-800-522-6752 Housing Assemblies .156 Centers Contacts Wire Range: 24-18 AWG Insulation Diameter: .100 120 A 131 B High Force Low Force Part Numbers Contact Material and Finish Strip Loose Piece A .012 brass, bright tin plated 640252-1 640706-1 .012 pre-tin brass 640252-2 640706-2 .012 brass, bright tin plated 350980-1 640707-1 B .012 pre-tin brass 350980-2 .012 brass, gold plated 350980-3 770258-1 Keying Plug Material: Thermoplastic 94V-2 fi ech ted, natural rated, natural (_ 300 _ Le vo5 ke 300 Keying Plug Keying Plug Part No. 640254-1 Part No. 640255-1 Dimensioning: Dimensions are in inches Application Note: Contact part no. 640252 has a higher mating and unmating force than contact part no. 350980 and is recommended to be used in 1 through 12 position housings. All tin-plated contacts are post lubricated to resist fretting corrosion. Contact part no. 350980 can be used in any size housing but is recom- mended to be used with 13 through 24 position housings. All tin-plated contacts are post lubricated to resist fretting corrosion. Hand Too! Nos.: 90123-2 for .060-.100 insulation diameter range, and 90123-5 for .043-.075 insulation diameter range Applicator Part No.: 466468-2 (AMP-O-LECTRIC Machine) Applicators for AMPOMATOR automatic lead making machines and stripper-crimper machines are also available. Contact AMP Incorporated, Harrisburg, PA 17105. Extraction Tool No.: 457241-1 3404 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752Specifications subject to change. SL.156 For latest design specifications... Dimensioning: inch IMENSIONS are in inches Board-to-Board Receptacle 1-800-522-6752 Housing Assemblies -156 Centers Right Angle Mounting Hook Style >) -325 to edge of board 156 Typ. Non-Cumuiative Recommended Mounting Hole Size for 1/16 thk. Pc Board Robotic Style A | SAY cr For mounting hole pattern, contact AMP Incorporated, Harrisburg, PA 17105 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 * PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 3405 $10}99UU0D pleog WNDID pelulg [PeGo t Board Connectors ircul Printed C SL.156 Board-to-Board Receptacle Housing Assemblies .156 Centers E227 222222, KZ Vertical Mounting Materials: rated thick plating. See chart 1 HousingThermoplastic 94V-2 ContactsPhosphor bronze, .010 FinishGold or tin over nickel Note: Accepts either .045 square or round posts. Mates with all Headers on Specifications subject to change. For latest design specifications... 1-800-522-6752 060 + .002 Dia. Typ. "156 Typ. >| Non-Cumulative Recommended Mounting Hole Size for 1/16 thk. Pc Board fe coo eS 0 Keying Plug Keying Plug Part No. 640254-1 _ Part No. 640255-1 page 3398. No. of Dim. Hook Robotic Vertical Positions A Gold Tin Gold Tin Gold Tin 3 464 770219-3 770214-3 770220-3 770216-3 770221-3 770218-3 4 620 770219-4 770214-4 770220-4 770216-4 770221-4 770218-4 5 776 770219-5 770214-5 770220-5 770216-5 770221-5 770218-5 6 932 770219-6 770214-6 770220-6 770216-6 7702216 770218-6 7 1.088 770219-7 770214-7 770220-7 770216-7 770221-7 770218-7 8 1.244 770219-8 770214-8 770220-8 770216-8 770221-8 770218-8 9 1.400 770219-9 770214-9 770220-9 770216-9 770221-9 770218-9 10 1.556 1-770219-0 1-770214-0 1-770220-0 1-770216-0 1-770221-0 1-770218-0 11 1.712 1-770219-1 1-770214-1 1-770220-1 1-770216-1 1-770221-1 1-770218-1 12 1.868 1-770219-2 1-770214-2 1-770220-2 1-770216-2 1-770221-2 1-770218-2 13 2.024 1-770219-3 1-770214-3 1-770220-3 1-770216-3 1-770221-3 1-770218-3 14 2.180 1-770219-4 1-770214-4 1-770220-4 1-770216-4 1-770221-4 1-770218-4 15 2.336 4-770219-5 1-770214-5 1-770220-5 1-770216-5 1-770221-5 1-770218-5 Dimensioning: Dimensions are in inches 3406 AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752