TD3043 Zero-Volt Switching Triac Driver DESCRIPTION The TD3043 consists of a single input LED optically coupled to a zero-volt crossing triac driver. The TD3043 provides high input-to-output isolation and is designed to drive high-powered triacs. Typical uses include interfacing logic level control signals to equipment powered from 110Vac and 220Vac lines. FEATURES APPLICATIONS x Zero-volt switching x Home appliances x 400V blocking voltage x Motor/Drive controls x High input-to-output isolation (5000 Vrms) x Solid state relays x High reliability x Solenoid/Valve control x Solenoids x Exercise equipment x Temperature Controls OPTIONS/SUFFIXES MAXIMUM RATINGS PARAMETER x -S Surface Mount Option x -V Meeting VDE Requirements SCHEMATIC DIAGRAM 1. Anode 2. Cathode 3. NC 4. MAIN TERMINAL 5. SUBSTRATE DO NOT CONNECT 6. MAIN TERMINAL UNIT MIN Storage Temperature C -55 125 Operating Temperature C -40 85 Continuous Input Current mA 40 Transient Input Current mA 400 Reverse Input Control Voltage V Output Power Dissipation Soldering Temperature (10 seconds) TYP MAX 6 mW 330 C 260 APPROVALS x rev 1.0 UL and C-UL Approved File #E201932 Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com TD3043 Zero-Volt Switching Triac Driver ELECTRICAL CHARACTERISTICS - 25 PARAMETER UNIT MIN TYP MAX 1.2 1.5 TEST CONDITIONS INPUT SPECIFICATIONS LED Forward Voltage V LED Reverse Voltage 6 12 V Turn-On Current mA 2.5 Turn-Off Current mA 0.5 Reverse Leakage Current PA If = 10mA Ir = 10uA 5 Io = 100mA 10 Vr=4V OUTPUT SPECIFICATIONS Blocking Voltage Peak Blocking Current 400 V Io = 1uA nA 60 Holding Current PA 100 Leakage Current PA On-State Voltage V Critical Rate of Rise V/ 1.8 Ps 500 VDRM=400V 1 Vo = 400V 3 ITM=100mA 100 COUPLED SPECIFICATIONS Isolation Voltage rev 1.0 V Coupled Capacitance pF Isolation Resistance G: 5000 T = 1 minute 2 50 DC500V Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com TD3043 Zero-Volt Switching Triac Driver PERFORMANCE DATA VTM,ON-STATE VOLTAGE (VOLTS) Ta,AMBIENT TEMPERATURE (C) Ta,AMBIENT TEMPERATURE (C) rev 1.0 Ta,AMBIENT TEMPERATURE (C) Fig.5 Trigger Current versus Temperature IFT , NORMALIZED IDRM2 NORMALIZED Fig.4 IDRM2 ,Leakage in Inhibit State versus Temperature Fig.3 Leakage with LED Off versus Temperature IDRM1,PEAK BLOCKING CURRENT (nA) Fig.2 Inhibit Voltage versus Temperature VINH, NORMALIZED ITM,ON-STATE CURRENT (mA) Fig.1 On-State Characteristics Ta,AMBIENT TEMPERATURE (C) Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com TD3043 Zero-Volt Switching Triac Driver MECHANICAL DIMENSIONS 6 PIN DUAL IN-LINE PACKAGE 6 PIN SURFACE MOUNT DEVICE TOLERANCE :+ 0.25mm Meeting VDE Requirements (Clearance and Creepage) -V Unit (mm) rev 1.0 Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com