DK-QCC3031-QFN80-A-0 - Qualcomm

1. General description

74HC1G02-Q100 and 74HCT1G02-Q100 are high spe ed Si-gate CMOS devices. They

provide a 2-input NOR function.

The standard output currents are half those of the 74HC02-Q100 and 74HCT02-Q100.

This product has been qualified to the Automotive Electronics Council (AEC) standard

Q100 (Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

Specified from 40 C to +85 C and from 40 C to +125 C

Input levels:

For 74HC1G02-Q100: CMOS level

For 74HCT1G02-Q100: TTL level

Symmetrical output impedance

High noise immunity

Low power dissipation

Balanced propagation delays

ESD protection:

MIL-STD-883, method 3015 exceeds 2000 V

HBM JESD22-A114F exceeds 2000 V

MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )

SOT353-1 and SOT753 package options

3. Ordering information

74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

Rev. 1 — 7 August 2012 Product data sheet

Table 1. Ordering information

Type number Package

Temperature range Name Description Version

74HC1G02GW-Q100 40 C to +125 C TSSOP5 plastic thin shrink small outline package;

5 leads; body width 1.25 mm SOT353-1

74HCT1G02GW-Q100

74HC1G02GV-Q100 40 C to +125 C SC-74A plastic surface-mounted package; 5 leads SOT753

74HCT1G02GV-Q100

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 2 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

4. Marking

[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.

5. Functional diagram

6. Pinning information

6.1 Pinning

6.2 Pin description

Table 2. Marking codes

Type number Marking[1]

74HC1G02GW-Q100 HB

74HCT1G02GW-Q100 TB

74HC1G02GV-Q100 H02

74HCT1G02GV-Q100 T02

Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram

mna103

mna104

≥ 1

mna105

Fig 4. Pin configuration

+&*4

+&7*4

*1' <

DDD











Table 3. Pin description

Symbol Pin Description

B 1 data input

A 2 data input

GND 3 ground (0 V)

Y 4 data output

VCC 5 supply voltage

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 3 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

7. Functional description

8. Limiting values

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

[2] Above 55 C, the value of Ptot derates linearly with 2.5 mW/K.

9. Recommended operating conditions

Table 4. Function table

H = HIGH voltage level; L = LOW voltage level

Inputs Output

ABY

LLH

LHL

HLL

HHL

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). [1]

Symbol Parameter Conditions Min Max Unit

VCC supply voltage 0.5 +7.0 V

IIK input clamping current VI < 0.5 V or VI>V

CC + 0.5 V - 20 mA

IOK output clamping current VO<0.5 V or VO>V

CC + 0.5 V - 20 mA

IOoutput current 0.5 V < VO <V

CC +0.5V - 12.5 mA

ICC supply current - 25 mA

IGND ground current 25 - mA

Tstg storage temperature 65 +150 C

Ptot total power dissipation Tamb = 40 C to +125 C[2] - 200 mW

Table 6. Recommended operating con ditions

Vo ltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions 74HC1G02-Q100 74HCT1G02-Q100 Unit

Min Typ Max Min Typ Max

VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V

VIinput voltage 0 - VCC 0- V

CC V

VOoutput voltage 0 - VCC 0- V

CC V

Tamb ambient temperature 40 +25 +125 40 +25 +125 C

t/V input transition rise

and fall rate VCC = 2.0 V - - 625 - - - ns/V

VCC = 4.5 V - - 139 - - 139 ns/V

VCC = 6.0 V - - 83 - - - ns/V

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 4 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

10. Static characteristics

Table 7. Static characteristics

Vo ltages are referenced to GND (ground = 0 V). All typical values are measured at Tamb =25



Symbol Parameter Conditions 40 C to +85 C40 C to +125 CUnit

Min Typ Max Min Max

74HC1G02-Q100

VIH HIGH-level input

voltage VCC = 2.0 V 1.5 1.2 - 1.5 - V

VCC = 4.5 V 3.15 2.4 - 3.15 - V

VCC = 6.0 V 4.2 3.2 - 4.2 - V

VIL LOW-level input

voltage VCC = 2.0 V - 0 .8 0.5 - 0.5 V

VCC = 4.5 V - 2.1 1.35 - 1.35 V

VCC = 6.0 V - 2.8 1.8 - 1.8 V

VOH HIGH-level output

voltage VI= VIH or VIL

IO= 20 A; VCC = 2.0 V 1.9 2.0 - 1.9 - V

IO= 20 A; VCC = 4.5 V 4.4 4.5 - 4.4 - V

IO= 20 A; VCC = 6.0 V 5.9 6.0 - 5.9 - V

IO= 2.0 mA; VCC = 4.5 V 4.13 4.32 - 3.7 - V

IO= 2.6 mA; VCC = 6.0 V 5.63 5.81 - 5.2 - V

VOL LOW-level output

voltage VI= VIH or VIL

IO= 20 A; VCC = 2.0 V - 0 0.1 - 0.1 V

IO= 20 A; VCC = 4.5 V - 0 0.1 - 0.1 V

IO= 20 A; VCC = 6.0 V - 0 0.1 - 0.1 V

IO= 2.0 mA; VCC = 4.5 V - 0.15 0.33 - 0.4 V

IO= 2.6 mA; VCC = 6.0 V - 0.16 0.33 - 0.4 V

IIinput leakage current VI=V

CC or GND; VCC = 6.0 V - - 1.0 - 1.0 A

ICC supply current VI=V

CC or GND; IO=0A;

VCC =6.0V --10- 20 A

CIinput capacitance - 1.5 - - - pF

74HCT1G02-Q100

VIH HIGH-level input

voltage VCC = 4.5 V to 5.5 V 2.0 1.6 - 2.0 - V

VIL LOW-level input

voltage VCC = 4.5 V to 5.5 V - 1 .2 0.8 - 0.8 V

VOH HIGH-level output

voltage VI= VIH or VIL

IO= 20 A; VCC = 4.5 V 4.4 4.5 - 4.4 - V

IO= 2.0 mA; VCC = 4.5 V 4.13 4.32 - 3.7 - V

VOL LOW-level output

voltage VI= VIH or VIL

IO= 20 A; VCC = 4.5 V - 0 0.1 - 0.1 V

IO= 2.0 mA; VCC = 4.5 V - 0.15 0.33 - 0.4 V

IIinput leakage current VI=V

CC or GND; VCC = 5.5 V - - 1.0 - 1.0 A

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 5 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

11. Dynamic characteristics

[1] tpd is the same as tPLH and tPHL.

[2] CPD is used to determine the dynamic power dissipation PD(W).

PD=C

PD VCC2fi+(CLVCC2fo)where:

fi= input frequency in MHz

fo= output frequency in MHz

CL= output load capacitance in pF

VCC = supply voltage in Volts

(CLVCC2fo) = sum of outputs

ICC supply current VI=V

CC or GND; IO=0A;

VCC =5.5V --10- 20 A

ICC additional supply

current per input; VCC = 4.5 V to 5.5 V;

VI=V

CC 2.1 V; IO= 0 A - - 500 - 850 A

CIinput capacitance - 1.5 - - - pF

Table 7. Static characteristics …continued

Vo ltages are referenced to GND (ground = 0 V). All typical values are measured at Tamb =25



Symbol Parameter Conditions 40 C to +85 C40 C to +125 CUnit

Min Typ Max Min Max

Table 8. Dy namic characteristics

GND = 0 V; tr = tf



6.0 ns; All typical values are measured at Tamb =25



C. For test circuit see Figure 6

Symbol Parameter Conditions 40 C to +85 C40 C to +125 CUnit

Min Typ Max Min Max

74HC1G02-Q100

tpd propagation delay A and B to Y; see Figure 5 [1]

VCC = 2.0 V; CL= 50 pF - 25 115 - 135 ns

VCC = 4.5 V; CL=50pF - 9 23 - 27 ns

VCC = 5.0 V; CL=15pF - 7 - - - ns

VCC = 6.0 V; CL=50pF - 8 20 - 23 ns

CPD power dissipation

capacitance VI=GNDtoV

CC [2] -18- - -pF

74HCT1G02-Q100

tpd propagation delay A and B to Y; see Figure 5 [1]

VCC = 4.5 V; CL=50pF - 11 24 - 27 ns

VCC = 5.0 V; CL=15pF - 9 - - - ns

CPD power dissipation

capacitance VI=GNDtoV

CC 1.5 V [2] -19- - -pF

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 6 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

12. Waveforms

For 74HC1G02-Q100: VM = 0.5  VCC; VI = GND to VCC

For 74HCT1G02-Q100: VM = 1.3 V; VI = GND to 3.0 V Test data is given in Table 8.

CL = Load capacitance including jig and probe

capacitance.

RT = Termination resistance should be equal to output

impedance Zo of the pulse generator.

Fig 5. Input to output propagation delays Fig 6. Test circuit for measuring switching times

mna106

A, B input

Y output

tPHL tPLH

mna101

RTCL

PULSE

GENERATOR DUT

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 7 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

13. Package outline

Fig 7. Package outline SOT353-1 (TSSOP5)

UNIT A1

max. A2A3bpLHELpwyv

ceD(1) E(1) Z(1) θ

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.1

01.0

0.8 0.30

0.15 0.25

0.08 2.25

1.85 1.35

1.15 0.65

1.3 2.25

2.0 0.60

0.15 7°

0°

0.1 0.10.30.425

DIMENSIONS (mm are the original dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

0.46

0.21

SOT353-1 MO-203 SC-88A 00-09-01

03-02-19

0.15

(A3)

detail X

vMA

1.5 3 mm0

scale

TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1

1.1

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 8 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

Fig 8. Package outline SOT753 (SC-74A)

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

SOT753 SC-74A

wBM

detail X

vMA

0 1 2 mm

scale

132

Plastic surface-mounted package; 5 leads SOT753

UNIT A1bpcDEHELpQywv

mm 0.100

0.013 0.40

0.25 3.1

2.7

0.26

0.10 1.7

1.3

0.95 3.0

2.5 0.2 0.10.2

DIMENSIONS (mm are the original dimensions)

0.6

0.2 0.33

0.23

1.1

0.9

02-04-16

06-03-16

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 9 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

14. Abbreviations

15. Revision history

Table 9. Abbreviations

Acronym Description

CMOS Complementary Metal Oxide Semiconductor

TTL Transistor-Trans istor Logic

HBM Human Body Model

ESD ElectroStatic Discharge

MM Machine Model

DUT Device Under Test

MIL Military

Table 10. Revision history

Document ID Release date Data sheet status Change notice Supersedes

74HC_HCT1G02_Q100 v.1 20120807 Product data sheet - -

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 10 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

16. Legal information

16.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Definitions”.

[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nexperia.com.

16.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liab ility for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and tit le. A short data sh eet is intended

for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and

full information. For detailed and full informatio n see the relevant full data

sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short dat a sheet, the

full data sheet shall pre vail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agr eed between

Nexperia and its customer, unless Nexperia and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the Nexperia product is

deemed to off er functions and qualities beyond those described in the

Product data sheet.

16.3 Disclaimers

Limited warr a nty and liability — Information in this document is believed to

be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no

responsibility for the content in this document if provided by an inf ormation

source outside of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental,

punitive, special or consequ ential damages (including - wit hout limitatio n - lost

profits, lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards

customer for the products described herein shall be limited in accordance

with the Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make

changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all informa tion supplied prior

to the publication hereof .

Suitability for use in automotive applications — This Nexperia

product has been qualified for use in automotive

applications. Unless ot herwise agreed in writing, the product is not designed,

authorized or warranted to be suitable for use in life support, life-critical or

safety-critical systems or equipment, nor in applications where failure or

malfunction of a Nexperia product can reasonably be expected

to result in perso nal injury, death or severe property or environmental

damage. Nexperia and its suppliers accept no liability for

inclusion and/or use of Nexperia products in such equipment or

applications an d ther efo re su ch inclusi on a nd/or use is at the cu stome r's own

risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no

representation or warranty tha t such application s will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and ope ration of their applications

and products using Nexperia products, and Nexperia

accepts no liability for any assistance with applications or customer product

design. It is customer’s sole responsibility to determine whether the Nexperia

product is suitable and fit for the customer’s applications and

products planned, as well as fo r the planned application and use of

customer’s third party customer(s). Customers should provide appropriate

design and operating safeguards to minimize the risks associated with t heir

applications and products.

Nexperia does not accept any liability related to any default,

damage, costs or problem which is based on any weakness or default in the

customer’s applications or products, or the application or use by customer’s

third party customer(s). Customer is responsible for doing all necessa ry

testing for the customer’s applications and products using Nexperia

products in order to avoid a default of the applications and

the products or of the application or use by cu stomer’s third party

customer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanent ly and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia

products are sold subject to the general terms and conditions of commercial

sale, as published at http://www.nexperia.com/profile/terms, unless otherwise

agreed in a valid written individua l agreement. In case an individual

agreement is concluded only the ter ms and conditions of the respective

agreement shall apply. Nexperia hereby expressly objects to

applying the customer’s general terms and conditions with regard to the

purchase of Nexperia products by customer.

Document status[1][2] Product status[3] Definition

Objective [short] data sheet D evelopment This document contains data from the objective specification for product development.

Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.

Product [short] dat a sheet Pro duction This document contains the product specification.

74HC_HCT1G02_Q100 All information provided in this document is subject to legal disclaimers.

Product data sheet Rev. 1 — 7 August 2012 11 of 12

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

No offer to sell or license — Nothing in this document may be interpret ed or

construed as an of fer to sell product s that is op en for accept ance or the grant ,

conveyance or implication of any license under any copyrights, patents or

other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

16.4 Trademarks

Notice: All referenced b rands, produc t names, service names and trademarks

are the property of their respect i ve ow ners.

17. Contact information

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Nexperia 74HC1G02-Q100; 74HCT1G02-Q100

2-input NOR gate

18. Contents

1 General description. . . . . . . . . . . . . . . . . . . . . . 1

2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 1

4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Functional di agram . . . . . . . . . . . . . . . . . . . . . . 2

6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2

7 Functional de scription . . . . . . . . . . . . . . . . . . . 3

8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3

9 Recommended operating conditions. . . . . . . . 3

10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4

11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 5

12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7

14 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 9

15 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 9

16 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10

16.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10

16.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

16.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

16.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

17 Contact information. . . . . . . . . . . . . . . . . . . . . 11

18 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release:

07 August 2012