PRODUCT DATASHEET
4635 Boston Lane
Phone: 512-382-8100
MKTG-DOC-000104
E01
Austin, TX 78735
www.nuventix.com
Revision
Oct 2011
SynJet® Spotlight Cooler 70W
SynJet cooling technology provides the most reliable thermal
management solution available. This LED cooler has been developed
by Nuventix for cooling downlight and spotli g h t modules and arrays.
• Cools up to 70 W4
• Reliable 100K Hours Lifetime
• Energ y Effic ient
Specifications1
Thermal & Acoustic
SynJet Setting2Θs-a 3TDP 4SPL
(dBA)
(W) 5Wire Connections
Mid Performance 0.48 63 25 Red to +VDC
Black & Blue to Ground
Standard Performanc e 0.55 55 22 Red t o +VDC
Black only to Ground
Silent Perf ormance 0.65 46 19 Red t o +VDC
Black & Purple to Ground
PWM at 100% duty cycle 0.43 70 28
Red to +VD C
Black only to Ground
Blue to PWM Signal
Electrical
SynJet Setting2 Voltage
(VDC)
+/- 10%
Current (mA)
6
Pavg
(mW)
Voltage
(VDC)
+/- 10%
Current (mA)
6
Pavg
(mW)
Imin
Iavg
Ipeak
Imin
Iavg
Ipeak
Mid
5 20
120
240
600
12 10
67
134
800
Standard 80 160 400 50 100 600
Silent
60
120
300
40
80
480
PWM at 100% duty cycle 160 320 800 82 164 980
Environmental
All Settings
Min Max Units Conditions
Operating Temperature -40 70 °
C
Air temperature surrounding cooler
Storage Temperature -50 95 °C Air temperature surroundi ng cooler
Storage Altitude 15K m Above sea level
Operating Relati ve Humidity 5 95 % Non-condensing
Weight 600 g SynJet with Al heat sink and Cu mounting plate
Reliability 100K hrs L10 @ 60°C
Regulatory Complianc e RoHS, U L, FCC Part 15 Class B, CE
1 All values are typical at 25ºC unless otherwise stated.
2 The Level Select model should be used for discrete performance settings. Follow the instructions in the Product Design Guide for adjusting settings.
3 Thermal resistanc e valu es ar e given as referenc e only and are measured in free air without airflow obstructions. Thermal resistance is measured from the bottom
middle of the heat sink to ambient air measured at the inlet to the SynJet, with a heat source at least 15cm2 using the 70 W reference heat sink. Actual thermal
performance may vary by application and final product design should be tested to assure proper thermal performance.
4 Thermal Design Power is bas ed on a 30ºC temperature rise of heat sink mounting surface above ambient temperature around cooler.
5 Sound Pressure Level is measured at 1 meter distance per ISO 7779.
6 The SynJet has a time varying current. The current waveform is sinusoidal and the average current (Iavg) is used to calculate the average power consumption
(Pavg) at nominal input voltage (VDC). See the Electrical section in the Product Design Guide for a detailed explanation.
• 5 Yr Warranty
• Small Form Factor
•
Quiet Acoust ic s
PRODUCT DATASHEET
4635 Boston Lane
Phone: 512-382-8100
MKTG-DOC-000104
E01
Austin, TX 78735
www.nuventix.com
Revision
Oct 2011
Mechanical
SynJet Cooling Solution shown with Configurable heat si n k
SynJet Wire Harness Connector Pi n o u t
Part Numbers
Part Number
Description
Notes
NX200100
SynJet, ZFlow 90, Level Select, 5V, Black
Configurable to discret e perf ormance settings
NX200101
SynJet, ZFlow 90, PWM, 5V, Black
Use with PWM input to control performance setti ng
NX200102
SynJet, ZFlow 90, Level Select, 12V, Black
Configurable to discret e perf ormance settings
NX200103
SynJet, ZFlow 90, PWM, 12V, Black
Use with PWM input to control performance setti ng
NX300108
Heatsink, 70W, Spotlight Cooler, Configurable, Molex Helieon, Philips
Twistable, Black, Al insert
Contact sales for other heatsink options
NX300109 Heatsink, 70W, Spotlight Cooler, Philips SLM, Vossloh-Schwabe, Black,
Al insert
Contact sales for other heatsink options
NX300110 Heatsi nk, 70W, Spotlight Cooler, Osram PrevaLed, Black, Al insert Contact sal es for other heatsink options
NX300111 Heatsi nk, 70W, Spotlight Cooler, BridgeLux RS, Bl ack, Al ins ert Contact s al es for other heatsink options
NX300112 Heatsi nk, 70W , Spotlight Cool er, Zhaga B3, Tridonic, Al, Black Cont act sales for other heatsink options
WALLS-C4150-001 Wire Harness, 4-Wire, 150 mm Length Contac t s al es for other wire harness opti ons
WALLS-C4600-001
Wire Harness, 4-Wire, 600 mm Length
Contact sales for other wire harness opt i ons
Pin
Wire Color
Symbol
Description
1 Red +VDC 5 V or 12 V depending on model
2
Black
GND
Ground
3 Purple CTRL2
Input for Level Select model
Status signal for PWM model
4 Blue CTRL1
Input for Level Select model
PWM input for PWM model
All dimensions are nominal and in mm unless otherwise stated. See product drawings f or more detail.
Nuventix reserves the right to make changes to the products or information cont ai ned herein without notic e. No
liability is assumed as a result of their use or applications. For addit ional information, please contact Nuventix directly.
IMPOR TAN T: Syn Jets should be compl etely wired to the power supply before the power supply is energized. The power supply s houl d be
turned off before the SynJet Cooler is disconnected. SynJet Coolers are not designed for “hot swap” or “hot plug” applications.
