2SC5103 Datasheet NPN 5A 60V Middle Power Transistor lOutline Parameter Value VCEO IC 60V 5A CPT3 Collector Base Emitter 2SC5103 (SC-63) <SOT-428> lFeatures 1) Suitable for Middle Power Driver 2) Complementary PNP Types : 2SA1952 3) Low VCE(sat) VCE(sat)=0.3V(Max.) (IC/IB=3A/0.15A) VCE(sat)=0.5V(Max.) (IC/IB=4A/0.2A) 4) Lead Free/RoHS Compliant. lInner circuit Collector lApplications Motor driver , LED driver Power supply Base Emitter lPackaging specifications Part No. Package Package size (mm) Taping code 2SC5103 CPT3 6595 TL Basic Reel size Tape width ordering (mm) (mm) unit (pcs) 330 16 2,500 Marking C5103 lAbsolute maximum ratings (Ta = 25C) Parameter Collector-base voltage Symbol VCBO Values 100 Unit V Collector-emitter voltage VCEO 60 V Emitter-base voltage VEBO 5 V IC Collector current DC Pulsed Power dissipation 5 A ICP *1 10 A PD *2 1 W *3 10 W 150 C -55 to +150 C Junction temperature PD Tj Range of storage temperature Tstg *1 Pw=100ms , single pulse *2 Mounted on a substrate *3 Tc=25C www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 1/6 2013.07 - Rev.B Data Sheet 2SC5103 lElectrical characteristics (Ta = 25C) Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Symbol Conditions Min. Typ. Max. Unit BVCEO IC = 1mA 60 - - V BVCBO IC = 50mA 100 - - V BVEBO IE = 50mA 5 - - V Collector cut-off current ICBO VCB = 100V - - 10 mA Emitter cut-off current IEBO VEB = 5V - - 10 mA IC = 3A, IB = 0.15A - 0.15 0.3 V IC = 4A, IB = 0.2A - - 0.5 V IC = 3A, IB = 0.15A - - 1.2 V IC = 4A, IB = 0.2A - - 1.5 V hFE 1 VCE = 2V, IC = 1A 120 - 270 - hFE 2 VCE = 2V, IC = 3A 40 - - - - 120 - MHz - 80 - pF - - 0.3 ns - - 1.5 ns - 0.1 0.3 ns Collector-emitter saturation voltage VCE(sat) Base-emitter saturation voltage VBE(sat) *1 *1 DC current gain Transition frequency fT*1 Output capacitance Cob Turn-on time ton *2 Storage time tstg *2 tf *2 Fall time VCE = 10V, IE = -0.5A f=30MHZ VCB = 10V, IE = 0A f = 1MHz IC=3A IB1=0.15A IB2= -0.15A VCC30V *1 Pulsed *2 See switching time test circuit lhFE rank categories Rank hFE Q 120 to 270 lSwitching time test circuit www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 2/6 2013.07 - Rev.B Data Sheet 2SC5103 lElectrical characteristic curves(Ta = 25C) Fig.2 Typical Output Characteristics COLLECTOR CURRENT : IC [A] COLLECTOR CURRENT : IC [A] Fig.1 Ground Emitter Propagation Characteristics BASE TO EMITTER VOLTAGE : VBE [V] Fig.3 DC Current Gain vs. Collector Current (I) COLECTOR TO EMITTE VOLTAGE : VCE [V] Fig.4 DC Current Gain vs. Collector Current (II) 1000 DC CURRENT GAIN : hFE DC CURRENT GAIN : hFE Ta=25C Pulsed 100 VCE= 5V 2V 1V 10 0.01 1 10 COLLECTOR CURRENT : IC [A] COLLECTOR CURRENT : IC [A] www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 0.1 3/6 2013.07 - Rev.B Data Sheet 2SC5103 lElectrical characteristic curves(Ta = 25C) Fig.5 Collector-Emitter Saturation Voltage vs. Collector Current (I) Fig.6 Collector-Emitter Saturation Voltage vs. Collector Current (II) COLLECTOR-EMITTER SATURATION VOLTAGE : VCE(sat) [V] COLLECTOR-EMITTER SATURATION VOLTAGE : VCE(sat) [V] 1 COLLECTOR CURRENT : IC [A] Ta=25C Pulsed 0.1 0.01 0.001 0.01 IC / IB =20/1 10/1 0.1 1 10 COLLECTOR CURRENT : IC [A] Fig.8 Gain Bandwidth Product vs. Emitter Current BASE-EMITTER SATURATION VOLTAGE : VBE(sat) [V] TRANSITION FREQUENCY : fT [MHz] Fig.7 Base-Emitter Saturation Voltage vs. Collector Current EMITTER CURRENT :IE [A] COLLECTOR CURRENT : IC [A] www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 4/6 2013.07 - Rev.B Data Sheet 2SC5103 Fig.9 Collector output capacitance vs. Collector-Base Voltage Fig.10 Safe Operating Area COLLECTOR CURRENT : IC [A] COLLECTOR OUTPUT CAPACITANCE : Cob [pF] lElectrical characteristic curves(Ta = 25C) COLLECTOR - BASE VOLTAGE : VCB [V] www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. COLLECTOR TO EMITTER VOLTAGE : VCE [V] 5/6 2013.07 - Rev.B Data Sheet 2SC5103 lDimensions (Unit : mm) A2 D B A b1 c1 H E L3 L2 CPT3 L4 A1 b2 Lp L1 L b3 c e b x B A A3 l3 l1 e b6 b5 l2 Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM A1 A2 A3 b b1 b2 b3 c c1 D E e HE L L1 L2 L3 L4 Lp x MILIMETERS MIN MAX 0.00 0.15 2.20 2.50 0.25 0.55 0.75 5.00 5.30 5.00 0.75 0.40 0.60 0.40 0.60 6.30 6.70 5.40 5.80 2.30 9.00 10.00 2.20 2.80 0.80 1.40 1.20 1.80 5.30 0.90 1.00 1.60 0.25 DIM b5 b6 1 2 3 MILIMETERS MIN MAX 1.00 5.20 2.50 5.50 10.00 INCHES MIN 0.000 0.087 0.010 0.022 0.197 MAX 0.006 0.098 0.030 0.209 0.197 0.030 0.016 0.016 0.248 0.213 0.354 0.087 0.031 0.047 0.039 MIN - 0.024 0.024 0.264 0.228 0.091 0.209 0.035 INCHES 0.394 0.110 0.055 0.071 0.063 0.010 MAX 0.04 0.205 0.098 0.217 0.394 Dimension in mm / inches www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 6/6 2013.07 - Rev.B Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. R1102A