Datasheet
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
2SC5103
NPN 5A 60V Middle Power Transistor
lOutline
lFeatures
1) Suitable for Middle Power Driver
2) Complementary PNP Types : 2SA1952
3) Low VCE(sat)
VCE(sat)=0.3V(Max.) (IC/IB=3A/0.15A)
VCE(sat)=0.5V(Max.) (IC/IB=4A/0.2A)
4) Lead Free/RoHS Compliant.
lInner circuit
lApplications
Motor driver , LED driver
Power supply
lPackaging specifications
lAbsolute maximum ratings (Ta = 25°C)
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage DC
Pulsed
Junction temperature
Range of storage temperature
*1 Pw=100ms , single pulse
*2 Mounted on a substrate
*3 Tc=25°C
Parameter
Value
VCEO
60V
IC
5A
CPT3
Basic
ordering
unit (pcs)
2SC5103
6595
330
2,500
Part No.
Package
size
(mm)
Reel size
(mm)
Parameter
Symbol
Values
Unit
VCBO
100
V
VCEO
60
V
VEBO
5
V
Collector current
IC
5
A
ICP *1
10
A
Power dissipation
PD *2
1
W
Tstg
-55 to +150
°C
PD *3
10
W
Tj
150
°C
2SC5103
(SC-63)
<SOT-428>
Base
Emitter
Collector
Collector
Base
Emitter
1/6
2013.07 - Rev.B
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
Data Sheet
2SC5103
lElectrical characteristics (Ta = 25°C)
*1 Pulsed
*2 See switching time test circuit
lhFE rank categories
lSwitching time test circuit
V
V
-
1.5
V
-
-
0.5
V
Rank
Q
pF
Transition frequency
fT*1
VCE = 10V, IE = -0.5A
f=30MHZ
-
120
0.3
ns
ns
tstg *2
-
-
-
1.5
ns
ton *2
IC=3A
IB1=0.15A
IB2= -0.15A
VCC⋍30V
-
-
0.3
MHz
hFE
120 to 270
-
-
Emitter cut-off current
IEBO
VEB = 5V
-
-
hFE 2
VCE = 2V, IC = 3A
40
-
DC current gain
VCE(sat) *1
VBE(sat) *1
IC = 4A, IB = 0.2A
-
-
-
-
0.1
Unit
V
mA
-
V
-
V
10
mA
10
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Collector-emitter
breakdown voltage
BVCEO
IC = 1mA
60
-
80
-
Collector-base
breakdown voltage
BVCBO
IC = 50mA
100
-
-
Emitter-base
breakdown voltage
BVEBO
IE = 50mA
5
-
IC = 4A, IB = 0.2A
-
-
120
0.15
0.3
-
1.2
-
270
-
tf *2
Collector cut-off current
ICBO
VCB = 100V
Base-emitter
saturation voltage
Turn-on time
Storage time
Fall time
Collector-emitter
saturation voltage
IC = 3A, IB = 0.15A
IC = 3A, IB = 0.15A
VCE = 2V, IC = 1A
hFE 1
Output capacitance
Cob
VCB = 10V, IE = 0A
f = 1MHz
-
2/6
2013.07 - Rev.B
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
Data Sheet
2SC5103
lElectrical characteristic curves(Ta = 25°C)
10
100
1000
0.01 0.1 1 10
VCE= 5V
2V
1V
Ta=25ºC
Pulsed
Fig.1 Ground Emitter Propagation Characteristics
COLLECTOR CURRENT : IC [A]
BASE TO EMITTER VOLTAGE : VBE [V]
Fig.2 Typical Output Characteristics
COLLECTOR CURRENT : IC [A]
COLECTOR TO EMITTE VOLTAGE : VCE [V]
Fig.3 DC Current Gain vs. Collector Current (I)
DC CURRENT GAIN : hFE
COLLECTOR CURRENT : IC [A]
Fig.4 DC Current Gain vs. Collector Current (II)
DC CURRENT GAIN : hFE
COLLECTOR CURRENT : IC [A]
3/6
2013.07 - Rev.B
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
Data Sheet
2SC5103
lElectrical characteristic curves(Ta = 25°C)
0.001
0.01
0.1
1
0.01 0.1 1 10
Ta=25ºC
Pulsed
IC / IB =20/1
10/1
Fig.5 Collector-Emitter Saturation Voltage
vs. Collector Current (I)
COLLECTOR-EMITTER
SATURATION VOLTAGE : VCE(sat) [V]
COLLECTOR CURRENT : IC [A]
Fig.6 Collector-Emitter Saturation Voltage
vs. Collector Current (II)
COLLECTOR-EMITTER
SATURATION VOLTAGE : VCE(sat) [V]
COLLECTOR CURRENT : IC [A]
Fig.7 Base-Emitter Saturation Voltage
vs. Collector Current
BASE-EMITTER
SATURATION VOLTAGE : VBE(sat) [V]
COLLECTOR CURRENT : IC [A]
Fig.8 Gain Bandwidth Product
vs. Emitter Current
TRANSITION FREQUENCY : fT [MHz]
EMITTER CURRENT :IE [A]
4/6
2013.07 - Rev.B
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
Data Sheet
2SC5103
lElectrical characteristic curves(Ta = 25°C)
Fig.9 Collector output capacitance vs.
Collector-Base Voltage
COLLECTOR OUTPUT CAPACITANCE : Cob [pF]
COLLECTOR - BASE VOLTAGE : VCB [V]
Fig.10 Safe Operating Area
COLLECTOR CURRENT : IC [A]
COLLECTOR TO EMITTER VOLTAGE : VCE [V]
5/6
2013.07 - Rev.B
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
Data Sheet
2SC5103
lDimensions (Unit : mm)
Dimension in mm / inches
CPT3
D
b1
eb
b3
b2
L3
A2
H
A1
A3
c
L1
Lp
x B A
L E L2
l3
l2 l1
b6
b5e
L4
c1
B
A
Pattern of terminal position areas
[Not a recommended pattern of soldering pads]
MIN MAX MIN MAX
A1 0.00 0.15 0.000 0.006
A2 2.20 2.50 0.087 0.098
A3
b0.55 0.75 0.022 0.030
b1 5.00 5.30 0.197 0.209
b2
b3
c0.40 0.60 0.016 0.024
c1 0.40 0.60 0.016 0.024
D6.30 6.70 0.248 0.264
E5.40 5.80 0.213 0.228
e
HE9.00 10.00 0.354 0.394
L2.20 2.80 0.087 0.110
L1 0.80 1.40 0.031 0.055
L2 1.20 1.80 0.047 0.071
L3
L4
Lp 1.00 1.60 0.039 0.063
x- 0.25 - 0.010
MIN MAX MIN MAX
b5 - 1.00 - 0.04
b6 - 5.20 - 0.205
ｌ1 - 2.50 - 0.098
ｌ2 - 5.50 - 0.217
ｌ3 - 10.00 - 0.394
DIM
MILIMETERS
INCHES
0.25
0.010
5.00
0.197
0.75
0.030
2.30
0.091
5.30
0.209
0.90
0.035
DIM
MILIMETERS
INCHES
6/6
2013.07 - Rev.B
R1102
A
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
The information contained herein is subject to change without notice.
Before you use our Products, please contact our sales representative
and verify the latest specifica-
tions :
Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to var ious factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
The Products specified in this document are not designed to be radiation tolerant.
For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)