Data sheet
Creation date January 19, 2019 10:10:03 AM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1
HDC insert
HDC HA 10 FS
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
General ordering data
Type HDC HA 10 FS
Order No. 1650620000
Version HDC insert, Female, 250 V, 16 A, No. of poles: 10,
Screw connection, Size: 2
GTIN (EAN) 4008190299293
Qty. 1 pc(s).
The small and slim HA series can be used wherever space
is limited.
The wire connection level is designed as a screw element.
All screw connection elements are equipped with wire
protection (with the exception of size 1).
Pole count: 10
Rated current:16 A
Rated voltage: 250 V
Rated voltage acc. to UL/CSA: 600 V AC/DC
Screw connection
Data sheet
HDC insert
HDC HA 10 FS
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date January 19, 2019 10:10:03 AM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2
Dimensions and weights
Length 56.6 mm Length (inches) 2.228 inch
Width 23 mm Width (inches) 0.906 inch
Height 31.1 mm Height (inches) 1.224 inch
Net weight 51 g
Temperatures
Limit temperature -40 °C ... 125 °C
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
Dimensions
Height of socket 31.1 mm Total length base 56.6 mm
General data
Conductor cross-section
2.5 mm²
Insulating material PC glass-fibre reinforced
(UL-listed and railway-
certified)
Insulating material group IIIa Insulation resistance 1010 Ω
Material Copper alloy Max. torque for main contact 0.55 Nm
Min. torque for main contact 0.5 Nm No. of poles 10
Plugging cycles, silver ≥ 500 Pollution severity 3
Rated current (DIN EN 61984) 16 A Rated impulse voltage (DIN EN 61984) 4 kV
Rated voltage (DIN EN 61984) 250 V Rated voltage according to UL/CSA 600 V AC/DC
Series HA Size 2
Surface finish Silver passivated Type Female
UL 94 flammability rating V-0 Volume resistance ≤ 2mΩ
Connection data PE
Blade size, crosshead size PH1 Blade size, slotted (PE connection) SD 0.8 x 4.0
Connection type PE Screw connection Fixing screw M 4
Rated cross-section 2.5 mm² Stripping length PE connection 10 mm
Tightening torque, max. PE connection 1.5 Nm Tightening torque, min. PE connection 1.2 Nm
Wire connection cross section, finely
stranded, max.
2.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max. 2.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min. 0.5 mm²
Wire connection cross-section, finely
stranded, min.
0.5 mm²
Wire cross section, AWG (PE), max. AWG 14 Wire cross section, AWG (PE), min. AWG 20
Wire cross-section, solid, max. 2.5 mm² Wire cross-section, solid, min. 0.5 mm²
Data sheet
HDC insert
HDC HA 10 FS
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Creation date January 19, 2019 10:10:03 AM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3
Version
Blade size size PH0 Blade size, slotted (screw connection) SD 0.6 x 3.5
Clamping screw M 3 Conductor cross-section, max. 2.5 mm²
Conductor cross-section, min. 0.5 mm² Material Copper alloy
Max. torque for main contact 0.55 Nm Min. torque for main contact 0.5 Nm
Size 2 Stripping length, rated connection 9 mm
Surface finish Silver passivated Type of connection Screw connection
Volume resistance
≤ 2mΩ
Wire connection cross section AWG,
max. AWG 14
Wire connection cross section AWG,
min. AWG 20
Wire connection cross section, finely
stranded, max. 2.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max. 2.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min. 0.5 mm²
Wire connection cross-section, finely
stranded, min. 0.5 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire cross-section, solid, min. 0.5 mm²
Classifications
ETIM 3.0 EC001121 ETIM 4.0 EC000438
ETIM 5.0 EC000438 ETIM 6.0 EC000438
UNSPSC 30-21-18-01 eClass 5.1 27-14-34-19
eClass 6.2 27-26-12-04 eClass 7.1 27-44-02-05
eClass 8.1 27-44-02-05 eClass 9.0 27-44-02-05
eClass 9.1 27-44-02-05
Product information
Descriptive text technical data Rated voltage 320 V / 4 kV at pollution degree 2
Instructions for accessories Accessories, see chapter J - Tools, see chapter K
Approvals
Approvals
ROHS Conform
Downloads
Brochure/Catalogue CAT 3 HDC 17/18 EN
FL FIELDWIRING EN
Engineering Data EPLAN, WSCAD, Zuken E3.S
Engineering Data STEP
Technical Documentation 1650620000_HDC_HA_10_FS_STP_Blatt__1.pdf
Data sheet
HDC insert
HDC HA 10 FS
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Creation date January 19, 2019 10:10:03 AM CET
Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4
Overview HDC
A
A.17
1çnçTechnical data
Tightening torques and screwing tools
Screw size Connector type Dia. tightening torque in Nm Recommended blade inserts and AF size for hexagon socket
M 2.5 Signal contacts
S 6/6 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
S 6/12 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
M 2.9 x 0.5 Fastening screws
HQ 4/2 0.8 (plastic) / 1.1 (metal) SD 0.6 x 3.5 mm or PH0
HQ 8 0.8 (plastic) / 1.1 (metal) SD 0.6 x 3.5 mm or PH0
HQ 17 0.8 (plastic) / 1.1 (metal) SD 0.6 x 3.5 mm or PH0
M 3 Contact screws
HA 3 0.5 - 0.55 SD 0.5 x 3.0 mm
HA 4 0.5 - 0.55 SD 0.5 x 3.0 mm
HA 10 bis HA 48 0.5 - 0.55 SD 0.6 x 3.5 mm or PH0
HE 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
HVE 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
Signal contacts:
S 4/2 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
S 4/8 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
PE connection via female contact
S 4 0.5 - 0.8 SD 0.6 x 3.5 mm
ConCept modular frame, metal 0.5 - 0.55 SD 0.6 x 3.5 mm
PE terminal
HQ 5 0.5 - 0.55 SD 0.6 x 3.5 or 0.8 x 4 mm
HQ 7 0.5 - 0.55 SD 0.6 x 3.5 or 0.8 x 4 mm
Fastening screws 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
Guide pin 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
Guide bush 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
Coding pins 0.5 - 0.55 SD 0.6 x 3.5 mm or PZ0
M 4 Contact screws
HSB 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PZ1
PE connection via male contact
S 4 0.5 - 0.8 SD 0.6 x 3.5 mm
ConCept modular frame, metal 1.2 - 1.5 SD 0.6 x 3.5 mm
PE terminal
HA 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PH1
HE 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PH1
HEE 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PH1
HVE 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PH1
HD 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PZ1
HDD 1.2 - 1.5 SD 0.6 x 3.5 or 0.8 x 4 mm or PZ1
S 6/6 (for signal contacts) 1.2 - 1.5 0.8 x 4 mm or PZ1
ConCept modular frame, plastic 1.2 - 1.5 0.8 x 4 mm or PZ1
M 5 PE terminal
HSB 2 - 2.5 SD 1 x 5.5 mm or PZ2
S 4/0 (Screw connection) 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 4/0 (Axial screw connection) 2 - 2.5 SD 0.8 x 4 mm or PZ 2
S 4/2 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 4/8 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 6/12 2 - 2.5 SD 0.8 x 4 mm or PZ 2
S 6/36 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 8/24 2 - 2.5 SD 1.2 x 6.5 mm or PH2
S 12/2 2 - 2.5 SD 1.2 x 6.5 mm or PH2
M 6 Power contacts
S 4/0 (Screw connection) 1.2 (1.5 mm²) / 2 (2.5 mm²) / 3 (4-16 mm²) SD 0.8 x 4 mm
S 4/2 1.2 (1.5 mm²) / 2 (2.5 mm²) / 3 (4-16 mm²) SD 0.8 x 4 mm
S 4/8 1.2 (1.5 mm²) / 2 (2.5 mm²) / 3 (4-16 mm²) SD 0.8 x 4 mm
M 7 x 0.75 Power contacts
S 4 1.1 – 1.7 SW 2
S 6/6 (+ PE) 6 – 8 SW 4
M 8 x 0.75 Power contacts
S 6/12 1.1 – 1.7 SW 2
S 8/0 (+ PE) 6 (10-16 mm²) - 7 (25 mm²) SW 4
M10 x 1 Power contacts
S 4/0 (Axial connection) 2 – 3 SW 3
Increasing the tightening torque does not improve the contact resistance. The stated torque settings offer optimal mechanical, thermal and electrical conditions. Exceeding the recommended values may even damage the conductor and
terminal.