DPEG SERIES PAGE ONE OF THREE 3,1675,3+($'(5 'HWDFKDEOH,QVXODWRU FEATURES Detachable insulator for ultra low profile applications Cost effective replacement for pin staking MATE-RITE TIP prevents scraping of mating socket Rounded tails facilitate board placement Mates with Crane's ATP, ATS, ABH, ABS, and ABT Sockets; JUN Jumpers SINGLE ROW (1 to 40 Positions) STANDARD PART DIMENSIONS SINGLE ROW DUAL ROW TRIPLE ROW POST "A" 0.318" / 8,08mm 0.318" / 8,08mm 0.318" / 8,08mm POST "B" 0.230" / 5,84mm 0.230" / 5,84mm 0.230" / 5,84mm MATING P POST "I" INSULATOR BODY See Selected Options (next page) SINGLE ROW DUAL ROW TRIPLE ROW W WIDTH 0.096" / 2,44mm 0.198" / 5,03mm 0.295" / 7,49mm H HEIGHT 0.098" / 2,49mm 0.098" / 2,49mm 0.098" / 2,49mm SINGLE ROW DUAL ROW TRIPLE ROW 0.110" / 2,79mm 0.110" / 2,79mm 0.110" / 2,79mm PC TAIL L LENGTH DUAL ROW (2 to 80 Positions) For other lengths, see Selected Options (next page) BOARD LAYOUT SINGLE ROW DUAL ROW TRIPLE ROW Finished Plated Thru-Hole Size 0.032" 0.002" / 0,81mm 0,05mm 0.032" 0.002" / 0,81mm 0,05mm 0.032" 0.002" / 0,81mm 0,05mm TRIPLE ROW (9 to 120 Positions) MATERIALS INSULATOR BODY Glass Filled Polyester (UL94V-O) POST Phosphor Bronze See SPECIFICATIONS and PERFORMANCE DATA for more detail PIN STAKING ALTERNATIVE? A Crane customer, frustrated with the "downtime" associated with his pin staking operation, ran tests to see if it would be a cost effective alternative to use Crane's DPEG Series connectors. The tests revealed he would not only save money, but eliminate the noise and rough handling associated with the staking operation. SAMPLE HOTLINE: 1-800-676-7644 CRANE CONNECTORS * 4700 Smith Road * Cincinnati, Ohio 45212 USA * E-mail Address: info@craneconnectors.com Phone: (513) 631-4700 * Fax (513) 631-5700 * Toll Free US (800) 676-7644 * Canada (800) 420-7310 DPEG SERIES PAGE TWO OF THREE HOW TO ORDER CRANE'S DPEG SERIES 0.100" (2,54mm) Centers 0.025" (0,64mm) Square Mating Posts STANDARD PART NUMBER OPTIONAL -- PRODUCT SERIES DPEG TOTAL NUMBER OF POSITIONS SINGLE 01-40 DUAL 02-80 TRIPLE 09-120 NUMBER OF ROWS SINGLE S DUAL D TRIPLE T TYPE OF HEADER STRAIGHT PLATING (See Specs At Bottom Of Page) G,T or M, H, L, F S Due to the number of options, not all platings are stocked for all pin lengths. Contact factory for availability. MATING POST DATA Mating Post Length Minimum Gold Plated Area 0.318" / 8,08mm 0.180" / 4,57mm A 0.230" / 5,84mm 0.180' / 4,57mm B OPTIONAL LENGTH - See Below TAIL (O.110" / 2,79mm STANDARD) COINED I 0.028" / 0,71mm Diagonal SELECTED OPTIONS If you need one of our OPTIONAL dimensions, just add designator to the end of standard part. I R POST TAIL 0.180 0.100" 1 8 0 Crane's Detachable Insulator Headers DPEG header is placed on the PC board Coined tail penetrates; square shoulder does not DPEG header is soldered to the PC board Insulator is removed from header after soldering NOTE: Crane recommends a PC hole diameter of 0.032" 0.002" for use with DPEG header series. SAMPLE HOTLINE: 1-800-676-7644 CRANE CONNECTORS * 4700 Smith Road * Cincinnati, Ohio 45212 USA * E-mail Address: info@craneconnectors.com Phone: (513) 631-4700 * Fax (513) 631-5700 * Toll Free US (800) 676-7644 * Canada (800) 420-7310 CRANE CONNECTORS - PLATING SPECIFICATIONS PLATING OPTIONS CONTACT AREA Inches (Millimeters) PC TAIL Inches (Millimeters) UNDERPLATE Inches (Millimeters) 15)" (0,00038) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. 100)" (0,00254) Tin / Lead 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. G Selective T Tin / Lead M Selective 50)" (0,00127) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. H Selective 30)" (0,00076) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. L Selective 10)" (0,00025) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. F Selective 3)" (0,00008) Gold 100)" (0,00254) Tin/Lead - Min 50)" (0,00127) Nickel - Min. STANDARD TAIL OPTIONS ON 0.100" (2,54mm) PIN STRIP HEADERS STANDARDS ISO9001 "R" "K" "F" "Q" COINED KINKED FINE SQUARE The standard "R" option provides a coined tail improving solder action while making insertion easier. The "K" option provides a kinked tail, reducing unwanted movement on the PC board. The "F" option combines an 0.018" rounded tail with an 0.025" square post. This fine line feature allows more traces between holes. The "Q" option provides an 0.025" square tail for u s e i n wi r e wr a p applications. UL File No. E120111 (N) Crane Connectors File No. A-3620 Recognized to U.S. and Canadian r e q u i r e me n t s u n d er t h e Component Recognition Program of Underwriters Laboratories Inc. Registered by UL to ISO9001 under UL's accreditation by Raad voor de Certificatie (RvC), the Dutch Council for Certification. SAMPLE HOTLINE: 1-800-676-7644 CRANE CONNECTORS * 4700 Smith Road * Cincinnati, Ohio 45212 USA * E-mail Address: info@craneconnectors.com Phone: (513) 631-4700 * Fax (513) 631-5700 * Toll Free US (800) 676-7644 * Canada (800) 420-7310