SINGLE ROW (1 to 40 Positions)
DUAL ROW (2 to 80 Positions)
TRIPLE ROW (9 to 120 Positions)
DPEG SERIES PAGE ONE OF THREE
3,1675,3+($'(5
'HWDFKDEOH,QVXODWRU
FEATURES
Detachable insulator for ultra low profile applications
Cost effective replacement for pin staking
MATE-RI T E TIP prevents scraping of mating socket
Rounded tails facilitate board placement
Mates with Crane’s ATP, ATS, ABH, ABS, and ABT Sockets; JUN Jumpers
STANDARD PART DIMENS IONS
MATING SINGLE ROW DUAL ROW TRIPLE ROW
P
POST “A” 0.318" / 8,08mm 0.318" / 8,08mm 0.318" / 8,08mm
POST “B” 0.230" / 5,84mm 0.230" / 5,84mm 0.230" / 5,84mm
POST “I” See Selected Opti ons (next page)
INSULATOR
BODY SINGLE ROW DUAL ROW TRI PLE ROW
WWIDTH 0.096" / 2,44mm 0.198" / 5,03mm 0.295" / 7,49mm
HHEIGHT 0.098" / 2,49mm 0.098" / 2,49mm 0.098" / 2,49mm
PC TAIL SINGLE ROW DUAL ROW TRIPLE ROW
LLENGTH 0.110" / 2,79mm 0.110" / 2,79mm 0.110" / 2,79mm
For other lengths, see Selected Opt i ons (next page)
BOARD
LAYOUT SINGLE ROW DUAL ROW TRIPLE ROW
Finished Plated
Thru-Hole Siz e 0.032" ± 0.002" /
0,81mm ± 0,05mm 0.032" ± 0.002" /
0,81mm ± 0,05mm 0.032" ± 0.002" /
0,81mm ± 0,05mm
MATERIALS
INSULATOR
BODY Glass Filled Polyester (UL94V-O)
POST Phosphor Bronze
See SPECIFI CATIONS and PERFORMANCE DATA for more detail
SAMPLE HOTLINE: 1-800-676-7644
CRANE CONNECTORS • 4700 Smit h Road • Cincinnati, Ohio 45212 USA • E-mail Address: info@craneconnectors.com
Phone: (513) 631-4700 • Fax (513) 631-5700 • Toll Free US (800) 676-7644 • Canada (800) 420-7310
PIN STAKING ALTERNATIVE?
A Crane customer, frustrated with the “downtime” associated with his pin
stak ing operati on, ran test s to s ee if i t would be a cos t ef fec tive al ternat ive
to use Crane’s DPEG Seri es connect ors. The tests revealed he would not
only save money, but eliminate the noise and rough handling associated with
the staking operation.
DPEG SERIES PAGE TWO OF THREE
0.100" (2,54mm) Centers
0.025" (0,64mm)
Square Mating Posts
HOW TO ORDE R CRANE’S DPE G S ERIES
STANDARD PART NUM BER OPTIONAL
--
PRODUCT SERIES DPEG
TOTAL NUM BER OF POS I TI ONS SINGLE 01-40
DUAL 02-80
TRIPLE 09-120
NUMBE R OF ROWS SINGLE S
DUAL D
TRIPLE T
TYPE OF HEADER STRAIGHT S
PLATING (See Specs At Bottom Of Page) G,T or M, H, L, F
Due to the number of options, not all platings are stocked for all pin lengths. Contact fact ory f or availabilit y.
MATING POST DATA Mating Post Length Minimum Gold Plated Area
0.318" / 8, 08mm 0.180" / 4, 57mm A
0.230" / 5, 84mm 0.180' / 4, 57mm B
OPTIONAL LE NGTH - S ee B el ow I
TAIL (O.110" / 2, 79mm STANDARD) COINED 0.028" / 0, 71mm Di agonal R
SELECTED OPTIONS POST TAIL
If you need one of our OPTIONAL dimensions, just add designator to the end of standard part. I0.180 0.100" 180
Crane’s Detachable Insulator Headers
DPEG header is placed on
the PC board Coined tail penetrates; square
shoulder does not DPEG header is soldered to
the PC board Insulator is removed from header
after soldering
NOTE: Crane recommends a PC hole diameter of 0.032" ± 0.002" for use with DPEG header series.
SAMPLE HOTLINE: 1-800-676-7644
CRANE CONNECTORS • 4700 Smit h Road • Cincinnati, Ohio 45212 USA • E-mail Address: info@craneconnectors.com
Phone: (513) 631-4700 • Fax (513) 631-5700 • Toll Free US (800) 676-7644 • Canada (800) 420-7310
CRANE CONNECTORS - PLATING SPECIFICATIONS
PLATING OPTIONS CONTACT AREA
Inches (Millimeters) PC TAIL
Inches (Millimeters) UNDERPLATE
Inches (Millimeters)
GSelective 15
)
” (0,00038) Gold 100
)
” (0,00254) Tin/Lead - Min 50
)
” (0,00127) Nickel - Min.
TTin / Lead 100
)
” (0,00254) Tin / Lead 100
)
” (0,00254) Tin/Lead - Min 50
)
” (0,00127) Nickel - Min.
MSelective 50
)
” (0,00127) Gold 100
)
” (0,00254) Tin/Lead - Min 50
)
” (0,00127) Nickel - Min.
HSelective 30
)
” (0,00076) Gold 100
)
” (0,00254) Tin/Lead - Min 50
)
” (0,00127) Nickel - Min.
LSelective 10
)
” (0,00025) Gold 100
)
” (0,00254) Tin/Lead - Min 50
)
” (0,00127) Nickel - Min.
FSelective 3
)
” (0,00008) Gold 100
)
” (0,00254) Tin/Lead - Min 50
)
” (0,00127) Nickel - Min.
STANDARD TAIL OPTIONS ON 0. 100" (2,54mm ) PIN STRIP HEADE RS STANDARDS
“R”
COINED
“K”
KINKED
“F”
FINE
“Q”
SQUARE
UL File No. E120111 (N)
ISO9001
Crane Connectors
File No. A-3620
The standard “R” option
provides a coined tail
improving solder action
while making insertion
easier.
The “K” option provides a
kinked tail, reducing
unwanted movement on
the PC board.
The “F” option combines
an 0.018" rounded tail
with an 0.025" square
post. This fine line
feature allows more
traces between holes.
The “Q” option provides
an 0.025" square tail for
use in wire wrap
applications.
Recognized to U.S. and Canadian
requirements under the
Component Recogniti on Program
of Underwriters Laboratories Inc.
Registered by UL to ISO9001
under UL ’s accreditati on by Raad
voor de Certificatie (RvC), the
Dutch Council for Certification.
SAMPLE HOTLINE: 1-800-676-7644
CRANE CONNECTORS • 4700 Smit h Road • Cincinnati, Ohio 45212 USA • E-mail Address: info@craneconnectors.com
Phone: (513) 631-4700 • Fax (513) 631-5700 • Toll Free US (800) 676-7644 • Canada (800) 420-7310