942-0 )SUNON seecrrcaTion FOR arnovat. CUSTOMER DESCRIPTION. : DC BRUSHLESS FAN DIMENSIONS : 60X60X15 mm | MODEL , GMi206pHVI-A 371-07" P/N : +#-F APPROVED NO APPROVED BY (AUTHORZIED) . N[seeGno _[mo00117 oe f DAWN. | Gachen 6/12 |CHKD. \ f APPD. et EDITION 0 on \ | Gf. liSSUE DATE 06.13.2000 Y REVISE DATE (YE SPEC M60030 Foe Ta AA N 12FL., 120 CHUNG CHENG IST RD., KAOHSIUNG, TAIWAN, R.0.C. 4 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. TEL:886-7-7163069(41 LINES) FAX:886-7-7163086~8974 L-OR0 SUNON DC BRUSHLESS FAN MODEL: GM1206PHV1-A P/N | CHARACTERISTICS | 1. Motor Design 2. Insulation Resistance 3. Dielectric Strength 4. Noise Level 5. Input power, Current & Speed 6. Tolerances 7. Motor Protection 8. Air Performance :F * Patented single-coil DC brushless 4 poles motor design. More than 500M ohm between internal stator and lead wire(+) measured by DC 500V. Applied AC 500V for one minute or AC 600V for 2 seconds between housing and lead wire(+) : Measured in an semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with microphone at a distance of one meter from the fan intake. : Measured after continuous 30 minutes operation at rated voltage in clean air at ambient temperature of 25 degrees C. +15% on rated power and current. Polarity protected & Locked rotor protected. Measured by a double chamber. The value . are recorded when the fan speed is stabilize at rated voltage. eB TSAR Al SPEC.NO M600117 {REVISE DATE SUNONWEALTH ELECTRIC ISSUE DATE} 06. 13.2000 {|E DI TIO MACHINE INDUSTRY CO.,LTD.| PAGE 2 OF 8S42- H0F0 SUNON SPECIFICATIONS 1-9. MODEL: GM1206PHVI1-A P/N : 4 1-1. 2 F Rated Voltage Operating Voltage Range . Starting Voltage Rated Speed Air Delivery Static Pressure Rated Current Rated Power Noise Level 1-10. Direction of Rotation 1-11. Operating Temperature 1-12. Storage Temperature 1-13. Bearing System 1-14. Weight 1-15. Vibration 1-16. Locked Rotor Protection oe 12 VDC 5-13.8 VDC 5 VDC 4300 RPM + 400 RPM 21 CFM 0.18 Inch-H20 0.12 AMP 1.4 WATTS 36 dB(A) Counter-clockwise viewed front fan blade -10 to +90 Deg.C -40 to +90 Deg.C Vapo bearing system 39g Vibration of acceleration 1.5G and Frequency 5~50~5Hz is applied in the 3 directions(X,Y,Z) for 30 minutes, each Direction at the cycle of 1 minute. RE SR Re al SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO M600117_ [REVISE DATE). =. ISSUE DATE] 06. 13.2000 JE DI TI e PAGE 3 OF 8SL soo SUNON MODEL : GM1206PHVI-A ~ P/N iF PERFORMANCE CURVES STATIC PRESSURE mm-H20 Inch-HzO + 6 0.20 4 4 0.10 + 2 + 0 0 0 0.28 0.56 | | l m/min (&) oe Pte RE TE BRA A] SPEC.NO M600117 | REVISE SUNONWEALTH ELECTRIC ISSUE DATE] 06. 13.2000 JE DITI MACHINE INDUSTRY CO.,LTD.| PAGE 4 OF 8SIL- HO+0 SUNON MATERIAL 2-1. Frame 2-2. Impeller 2-3. Bobbin 2-4. Lead Wire DIMENSIONS Thermoplastic Thermoplastic Thermoplastic UL2468,26AWG,+RED;-BLACK UL1007,26AWG,YELLOW:3rd Wire ROTATION | = g i= 4-943 SUNON Gl a Hl H Oo1e wy] UL2468 #26AWG | 4+:RED,-:BLACK YELLOW RED UL1007 #26AWG YELLOW:2rd Wire BLACK 5403 300450 1.Air Flow Direction: Label side. 2.The Best Mounting Direction: In any orientation. 440.3 | Fe PBT of UL 94V-0 PBT of UL 94V-0 PBT of UL 94V-0 AIR FLOW as TT) 153 UNIT BSS ee eT RAR A] SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO M600117 REVISE DATE | 02-7 3 ISSUE DATE| 06. 13. 2000 EDITIO PAGE 5 OF 8 eeeOVE 9940 SUNON AVI +12.QV | NORM 3M f | t . + bt epee itd ttt Th +o , | of i + | 4 | ee ee | Rox} 1V Ti | T2: Ts | Ta < > T=1 Rotation T=T1+T2+T3+T4 =(1 Rotation) 60 T1l=T2=T3=T4= 4 (cpm) fete ET SES BRA A SPEC.NO M600117 [REVISE Det hop, - x. SUNONWEALTH ELECTRIC ISSUE DATE] 06. 13.2000 JE DIT I * MACHINE INDUSTRY CO.,LTD.| PAGE 6 OF 8HL - SOFO SUNON (FAN 3 WIRE SIGNAL | Fan with driver IC: @ R Type (Rotation Detector) Vu Vi J . I, . , lel Run: Locked 3" wire signal : Run 7VE Locked :Vu t,:Locked protection by cut-off run current (Ir) t,:Auto-restart by sending starting current (Is) DC FAN Customer's Circuit Vec Vce(sat) + Run <Locked > @ F Type (Frequency Generator) Va ~te1/4t, Run: ?Locked 3 wire signal : Run :Square Wave Locked 7Vu t3:F Type has open collector circuit designed for rpm measurement. Vec ' ' DC FAN Red(+) Hic]? Re pa nt ; hie ct ac. ~ I rH fe Customer's Circuit Vec Veet) LI LU Run +Locked > Vec=t15V max Vcc=t15V max Ic=10mA max Ic=10mA max Vee Vee Ic= Ic= Ru Ri Wa > sy. a PeSe BO ARA A] SPEC.NO M600117_ |REVISE ps A. SUNONWEALTH ELECTRIC ISSUE DATE] 06. 13. 2000 [E DIT I MACHINE INDUSTRY CO.,LTD.| PAGE 1 OF 8 ~D1 OSte | SUNON [Notes] 1. SUNON will not guarantee the products if the application of our products is exceeded the limitation which is specified on this specification. 2. In case of change of the specification specified on this document, a written notice is requested in advance. 3. Please do not touch the impeller with pressure and never bring the fan with lead wire. The bearings and lead wire may be damaged. 4, No guarantee on the products against the safety problem or failure caused by powder dust, drop of water or insect. . If there is any data or related documentation different from this data sheet, this data _ sheet is the principal reference. cn 6. For the purpose of MIS, please indicate SPEC No. on every order. 7. In case of the fan has no polarity protection function, wires with same color (electrode) must be connected together during the assembly. (i.e. red + red, black + black) or the fan will be damaged immediately. 8. Please do not use the fan in the environment of corrosive gas or liquid or any detrimental gas. 9. Please do not store the fan in the environment of high / low temperature, high humidity or any detrimental gas. Please store the fan within 6 months, every 6 months, there shall be a linkage of electric current to the fan, even though the fan is stored in room temperature. 10. While the fan is in operation, please do not lock the fan intentionally for a long period of time, since the continuous stoppage will result in over-heat and damage of the fan. 11.During the installation of the fan, please pay substantial attention to possible noise cause by resonance vibration and vibration. 12.During the testing of the fan, please be sure to use finger guard to insure safety. 13.Unless otherwise specified, if there is any doubt in the judgement, the temperature relative humidity range of environment will be take in according to the stand condition as 25C and 65%. AYERS OARAR SPEC.NO M600117_|REVISE DAE-1 SUNONWEALTH ELECTRIC [ISSUE DATE] 06.13.2000 JE DIT10 W- MACHINE INDUSTRY CO.,LTD.| PAGE | 8 OF 8