AMERICAN MICROSYSTEMS, INC.
October 1999
210.1.99
FS6282
FS6282FS6282
FS6282
Dual PLL Clock Generator IC
Dual PLL Clock Generator ICDual PLL Clock Generator IC
Dual PLL Clock Generator IC
ISO9001
ISO9001ISO9001
ISO9001
Table 2: Pin Descriptions
Key: AI = Analog Input; AO = Analog Output; DI = Digital Input; DIU = Input with Internal Pull-Up; DID = Input with Internal Pull-Down; DIO = Digital Input/Output; DI-3 = Three-Level Digital Input,
DO = Digital Output; P = Power/Ground; # = Active Low pin
PIN TYPE NAME DESCRIPTION
1DOCLKAClock Output A
2 P VSS Ground
3 AI XIN Crystal Oscillator Feedback
4 AO XOUT Crystal Oscillator Drive
5DOCLKBClock Output B
6DOCLKCClock Output C
7 P VDD Power (+3.3 volts)
8DI
UOE Output Enable (outputs acti ve when OE=VDD)
3.0 Electrical Specifications
Table 3: Absolute Maximum Ratings
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These conditions represent a stress rating only, and functional operation of the device at
these or any other conditions above the operational limits noted in this specification is not implied. Exposure to maximum rating conditions for extended conditions may affect device performance,
functionality, and reliability.
PARAMETER SYMBOL MIN. MAX. UNITS
Supply Voltage (VSS = ground) VDD VSS-0.5 7 V
Input Voltage, dc VIVSS-0.5 VDD+0.5 V
Output Voltage, dc VOVSS-0.5 VDD+0.5 V
Input Clamp Current, dc (V I < 0 or VI > VDD)I
IK -50 50 mA
Output Clamp Current, dc (VI < 0 or VI > VDD)I
OK -50 50 mA
Storage Temperature Range (non-condensing) TS-65 150 °C
Ambient Temperature Range, Under Bias TA-55 125 °C
Junction Temperature TJ125 °C
Lead Temperature (soldering, 10s) 260 °C
Input Static Disc harge Voltage Protection (MIL-STD 883E, Method 3015.7) 2 kV
CAUTION: ELECTROSTATIC SENSITIVE DEVICE
Permanent damage res ulting in a loss of functi onality or performance may occur if this devi ce is subjected to a high-energy elec-
trostatic discharge.
Table 4: Operating Conditions
PARAMETER SYMBOL CONDITIONS/DESCRIPTION MIN. TYP. MAX. UNITS
Supply Voltage VDD 3.3V ± 10% 3.0 3.3 3.6 V
Ambient Operating Temperature Range TA070°C