Users should evaluate the suitability of this product for their application. Specications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specication, without notication to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 3
The TE logo, Tyco Electronics and Raychem are trademarks. Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2008 Tyco Electronics Corporation. All rights reserved.
SPECIFICATION CONTROL DRAWING 55A0811
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT 1-23-08 X
This specication sheet forms a part of the latest issue of Raychem Specication 55A.
TITLE Date Revision
TABLE I. CONSTRUCTION DETAILS
PART NUMBER
1/
WIRE
SIZE
(AWG)
CONDUCTOR
STRANDING
(number x AWG)
DIAMETER OF
STRANDED
CONDUCTOR
(in.)
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
DIAMETER
(in.)
MAXIMUM
WEIGHT
(lbs/1000 ft.)
MINIMUM MAXIMUM
55A0811-26-* 26 19 x 38 .018 .020 41.3 .040 ± .002 1.7
55A0811-24-* 24 19 x 36 .023 .025 26.2 .045 ± .002 2.3
55A0811-22-* 22 19 x 34 .029 .031 16.2 .050 ± .002 3.2
55A0811-20-* 20 19 x 32 .037 .039 9.88 .058 ± .002 4.7
55A0811-18-* 18 19 x 30 .046 .049 6.23 .070 ± .003 7.2
55A0811-16-* 16 19 x 29 .052 .055 4.81 .077 ± .003 9.0
55A0811-14-* 14 19 x 27 .065 .069 3.06 .094 ± .003 13.8
55A0811-12-* 12 37 x 28 .084 .089 2.02 .111 ± .003 20.5
55A0811-10-* 10 37 x 26 .106 .113 1.26 .134 ± .004 32.4
55A0811- 8-* 8 133 x 29 .158 .173 .701 .195 ± .008 60.3
55A0811- 6-* 6 133 x 27 .198 .217 .445 .241 ± .010 94.5
55A0811- 4-* 4 133 x 25 .250 .274 .280 .310 ± .010 150.
55A0811- 2-* 2 665 x 30 .320 .340 .183 .408 ± .012 249.
55A0811- 1-* 1817 x 30 .360 .380 .149 .470 ± .012 325.
55A0811- 0-* 01045 x 30 .395 .425 .116 .510 ± .016 383.
55A0811-00-* 00 1330 x 30 .440 .475 .091 .570 ± .016 500.
55A0811-000-* 000 1665 x 30 .500 .540 .071 .610 ± .016 596.
55A0811-0000-* 0000 2109 x 30 .565 .605 .056 .675 ± .022 753.
CONDUCTOR - TIN-COATED COPPER PRIMARY INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
Primary insulation shall be of a
contrasting pigmentation to that
of the jacket.
JACKET - RADIATION-CROSSLINKED,
MODIFIED ETFE
SPECIFICATION CONTROL DRAWING Page 2 of 3 X 55A0811
Revision SCD Number
TABLE II. PERFORMANCE DETAILS
PART NUMBER
1/
BEND TESTING
MANDREL DIAMETER
(inch) (± 3%)
WEIGHT
(lb) (± 3%)
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
COLD
BEND
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
COLD
BEND
55A0811-26-* .375 1.00 .500 3.00
55A0811-24-* .500 1.00 .750 3.00
55A0811-22-* .500 1.00 1.00 3.00
55A0811-20-* .500 1.00 1.50 4.00
55A0811-18-* .750 1.50 2.00 4.00
55A0811-16-* 1.00 1.50 2.00 5.00
55A0811-14-* 1.00 2.00 3.00 5.00
55A0811-12-* 1.50 2.00 3.00 5.00
55A0811-10-* 2.00 3.00 3.00 5.00
55A0811- 8-* 3.00 4.00 4,00 6.00
55A0811- 6-* 4.00 5.00 4.00 10.0
55A0811- 4-* 5.00 6.00 4.00 10.0
55A0811- 2-* 6.00 8.00 6.00 15.0
55A0811- 1-* 8.00 10.0 6.00 15.0
55A0811- 0-* 8.00 10.0 6.00 15.0
55A0811-00-* 10.0 12.0 8.00 20.0
55A0811-000-* 10.0 12.0 8.00 20.0
55A0811-0000-* 10.0 12.0 8.00 20.0