2016-01-04 1
2016-0 1-04
Silicon NPN Phototransistor Arrays
Version 1.3
BPX 80, BPX 82 ... BPX 89
Features:
•Spectral range of sensitivity: (typ) 450 ... 1100 nm
•Package: Miniature Array, Epoxy
•Special: Multiple-digit array package
•High linearity
•Available in groups
Applications
•Miniature photointerrupters
•Industrial electronics
•For control and drive circuits
2016-01-04 2
Version 1.3 BPX 80, BPX 82 ... BPX 89
Ordering Information
Type: Photocurrent Ordering Code
IPCE [µA]
λ = 950 nm, Ee = 0.5 mW/cm2,
VCE = 5 V
BPX 82 > 320 Q62702P0021
BPX 83 > 320 Q62702P0025
BPX 84 > 320 Q62702P0030
BPX 85 > 320 Q62702P0031
BPX 86 > 320 Q62702P0022
BPX 87 > 320 Q62702P0032
BPX 88 > 320 Q62702P0033
BPX 89 > 320 Q62702P0026
BPX 80 > 320 Q62702P0028
Note: Only one bin within one packing unit (variation less than 2:1)
Version 1.3 BPX 80, BPX 82 ... BPX 89
2016-01-04 3
Maximum Ratings (TA = 25 °C)
Characteristics (TA = 25 °C)
Parameter Symbol Values Unit
Operating and storage temperature range Top; Tstg -40 ... 80 °C
Collector-emitter voltage VCE 35 V
Collector current IC50 mA
Collector surge current
(τ < 10 µs)
ICS 200 mA
Emitter-collector voltage VEC 7 V
Total Power dissipation Ptot 90 mW
Thermal resistance RthJA 750 K / W
Electrostatic discharge
(acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM)
VESD 2000 V
Parameter Symbol Values Unit
Wavelength of max. sensitivity (typ) λS max 850 nm
Spectral range of sensitivity (typ) λ10% (typ) 450
... 1100
nm
Radiant sensitive area (typ) A 0.11 mm2
Dimensions of chip area (typ) L x W (typ) 0.55 x
0.55
mm x
mm
Half angle (typ) ϕ ± 18 °
Capacitance
(VCE = 0 V, f = 1 MHz, E = 0)
(typ) CCE 7.5 pF
Dark current
(VCE = 20 V, E = 0)
(typ (max)) ICE0 1 (≤ 50) nA
Rise and fall time
(IC = 1 mA, VCC = 5 V, RL = 1 kΩ)
(typ) tr, tf6 µs
2016-01-04 4
Version 1.3 BPX 80, BPX 82 ... BPX 89
Grouping (TA = 25 °C, λ = 950 nm)
Group Min Photocurrent Max Photocurrent Typ Photocurrent Rise and fall time
Ee = 0.5 mW/cm2,
VCE = 5 V
Ee = 0.5 mW/cm2,
VCE = 5 V
EV = 1000 lx, Std.
Light A, VCE = 5 V
IC = 1 mA, VCC = 5
V, RL = 1 kΩ
IPCE, min [µA] IPCE, max [µA] IPCE [µA] tr, tf [µs]
-A 320 630 1500 5.5
-B 400 800 1900 6
-C 500 2300 8
Group Collector-emitter saturation voltage
IC = IPCEmin x 0.3, Ee = 0.5 mW/cm2
VCEsat [mV]
-A 150
-B 150
-C 150
Note.: IPCEmin is the min. photocurrent of the specified group.
For delivery the components are marked -A, -B, -C. Due to differing yields, it is not possible to order a
definite group.
Relative Spectral Sensitivity 1) page 10
Srel = f(λ)
Photocurrent 1) page 10
IPCE = f(Ee),
V
CE = 5 V
400
0nm
%
OHF04048
20
40
60
80
100
λ
rel
S
10
30
50
70
500 600 700 800 900 1100
Version 1.3 BPX 80, BPX 82 ... BPX 89
2016-01-04 5
Photocurrent 1) page 10
IPCE / IPCE(25°C) = f(TA), VCE = 5 V
Dark Current 1) page 10
ICEO = f(VCE), E = 0
Dark Current 1) page 10
ICEO = f(TA), E = 0
Collector-Emitter Capacitance 1) page 10
CCE = f(VCE), f = 1 MHz, E = 0
OHF04049
V
CE
0
10
101
10-1
10-2
CEO
I
nA
0 V5 10 15 20 25 30 35
nA
OHF04050
CEO
I
A
T
-2
10
-1
10
100
1
10
102
3
10
104
-25 0 25 50 75 100˚C
0
pF
OHF04051
CE
C
CE
V
10-3 10-2 10-1 100101102
V
1
2
3
4
5
6
7
8
Version 1.3 BPX 80, BPX 82 ... BPX 89
2016-01-04 7
Package Outline
Dimensions in mm.
2016-01-04 8
Version 1.3 BPX 80, BPX 82 ... BPX 89
Transistors
Number of Transistors per Array Dimensions "B"
2 4.5 ... 4.9
3 7.0 ... 7.4
4 9.6 ... 10.0
5 12.1 ... 12.5
6 14.6 ... 16.0
7 17.2 ... 17.6
8 19.7 ... 20.1
9 22.3 ... 22.7
10 24.8 ... 25.2
Package
Miniature Array, Epoxy
Approximate Weight:
0.2 g
TTW Soldering
IEC-61760-1 TTW
0
0s
OHA04645
50
100
150
200
250
300
t
T
˚C
235 ˚C - 260 ˚C
First wave
20 40 60 80 100 120 140 160 180 200 220 240
Second wave
10 s max., max. contact time 5 s per wave
Preheating
T
∆
100 ˚C
120 ˚C
130 ˚C
Typical
Cooling
ca. 3.5 K/s typical
ca. 2 K/s
ca. 5 K/s
Continuous line: typical process
Dotted line: process limits
< 150 K
Version 1.3 BPX 80, BPX 82 ... BPX 89
2016-01-04 9
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language wordings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any
costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of
OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be
endangered.
2016-01-04 10
Version 1.3 BPX 80, BPX 82 ... BPX 89
Glossary
1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or
calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily
correspond to the actual parameters of each single product, which could differ from the typical data and calculated
correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data
will be changed without any further notice.
2016-01-04 11
Version 1.3 BPX 80, BPX 82 ... BPX 89
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.
