1
Inductive sensor NMB5-12GM65-E0-V1
Release date: 2012-12-13 14:36 Date of issue: 2012-12-13 911275_eng.xml
Germany: +49 621 776-4411
Subject to modifications without notice
Pepperl+Fuchs Group
fa-info@pepperl-fuchs.comwww.pepperl-fuchs.com
USA: +1 330 486 0001
fa-info@us.pepperl-fuchs.com
Singapore: +65 6779 9091
fa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Model Number
NMB5-12GM65-E0-V1
Features
•5 mm flush
• Stainless steel sensing face
• Increased operating distance
Connection
Pinout
Accessories
V1-G-2M-PUR
Cable socket, M12, 4-pin, PUR cable
V1-W-2M-PUR
Cable socket, M12, 4-pin, PUR cable
AB-12
Mounting aid
1L+
L-
4
3
1
3
4
2
1 BN
2 WH
3 BU
4 BK
Wire colors in accordance with EN 60947-5-2
(brown)
(white)
(blue)
(black)
Dimensions
Technical Data
General specifications
Switching element function NPN NO
Rated operating distance sn5 mm
Installation flush (Requirements: see drawing below)
Output polarity DC
Assured operating distance sa0 ... 4.05 mm
Actuating element Ferrous and nonferrous targets
Reduction factor rAl 0.3
Reduction factor rCu 0.2
Reduction factor r304 0.85
Reduction factor rSt37 1
Nominal ratings
Operating voltage UB10 ... 30 V DC
Switching frequency f 0 ... 360 Hz
Hysteresis H 3 ... 15 typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop Ud≤ 2 V DC
Operating current IL≤ 200 mA
Off-state current Ir≤ 10 µA
No-load supply current I0≤ 10 mA
Operating voltage display LED, green
Indication of the switching state LED, yellow
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type Device connector M12 x 1 , 4-pin
Housing material Stainless steel 1.4305 / AISI 303
Sensing face Stainless steel 1.4305 / AISI 303
Protection degree IP67 / IP68 / IP69K - cordset dependent according to cable speci-
fication
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval Products with a maximum operating voltage of ≤36 V do not bear a
CCC marking because they do not require approval.
17
M12 x 1
6
65
54
44
M12 x 1
4
LED
Mild Steel
Sensor face is flush with mounting surface.
12
≥ 2
≥ 82°
