Boots
4-71
Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
4
Molded Parts
234A011 to 071
Applications
Provides strain relief and
mechanical protection on
D-subminiature connector
terminations.
J
234A011 to 071
H
R
X
K Dia.
J
H
P
W
K Dia.
J
234A011 to 071
H
K Dia.
J
H
P
W
K Dia.
Material* Material Description Precoating No. Adhesive PartNo.**
-3 Semirigid polyolefin /42 or /86 S-1017 or S-1048
-4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Viton®N/A S-1255-04
-25 Fluid-resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
AsSupplied (a)
After Unrestricted Recovery (b)
Product Dimensions
HJK
PRWX
This
Part ±5% ±5% ±5% ±5% Min. Max. ±10% ±10% ±20% ±20% Boot Fits
No. Cannon/
ababab b bbb
Cinch
234A011 20.3 [.80] 20.3 [.80] 10.7 [.42] 10.7 [.42] 7.9 [.31] 4.1 [.16] 25.9 [1.02] 21.6 [.85] 1.02 [.04] 3.05 [.12] DE-9
234A021 28.2 [1.11] 28.2 [1.11] 10.7 [.42] 10.7 [.42] 10.2 [.40] 5.3 [.21] 30.7 [1.21] 24.6 [.97] 1.02 [.04] 3.05 [.12] DA-15
234A032 42.2 [1.66] 42.2 [1.66] 10.7 [.42] 10.7 [.42] 14.0 [.55] 7.4 [.29] 42.9 [1.69] 27.9 [1.10] 1.02 [.04] 3.05 [.12] DB-25
234A042 58.7 [2.31] 58.7 [2.31] 10.7 [.42] 10.7 [.42] 17.3 [.68] 8.6 [.34] 53.3 [2.10] 30.5 [1.20] 1.02 [.04] 3.05 [.12] DC-37
234A052 57.9 [2.28] 57.9 [2.28] 13.7 [.54] 13.7 [.54] 19.1 [.75] 10.7 [.42] 55.9 [2.20] 32.3 [1.27] 1.02 [.04] 3.05 [.12] DD-50
234A061 20.3 [.80] 20.3 [.80] 10.7 [.42] 10.7 [.42] 7.9 [.31] 3.8 [.15] 25.9 [1.02] 18.5 [.73] 1.02 [.04] 3.05 [.12] DE-9
234A071 28.2 [1.11] 28.2 [1.11] 10.7 [.42] 10.7 [.42] 10.2 [.40] 5.1 [.20] 30.7 [1.21] 19.8 [.78] 1.02 [.04] 3.05 [.12] DA-15
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 (.06) max.
D-Subminiature,
Right-Angled Boot
Materials Available
Available in: Americas Europe Asia Pacific
nnn
VITON is a trademark of DuPont
Performance Elastomers
