CP High Volume Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead FEATURES * * * High performance for low cost * Special cement potting compound and ceramic case provide high thermal conductivity in a fireproof package Pb-free High power to size ratio e3 Ceramic cases are available with circuit board stand-offs (designated with a ...3 model ending) RoHS COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL RESISTANCE RANGE POWER RATING P40 C W CP0002 CP0003 CP0005 CP0005...3 CP0007 CP0007...3 CP0010 CP0010...3 CP0015 CP0020 WEIGHT (Typical) 5 %, 10 % WIREWOUND 0.1 - 82 0.1 - 180 0.1 - 180 0.1 - 180 0.1 - 430 0.1 - 430 0.1 - 470 0.1 - 470 0.5 - 600 0.5 - 1 k 2 3 5 5 7 7 10 10 15 20 g METAL OXIDE 83 - 30 k 181 - 33 k 181 - 50 k 181 - 50 k 431 - 50 k 431 - 50 k 471 - 50 k 471 - 50 k 601 - 50 k 1.1 k - 50 k 2.0 3.4 3.6 4.8 5.0 6.8 9.5 9.9 16.8 22.8 TECHNICAL SPECIFICATIONS PARAMETER UNIT WIREWOUND CHARACTERISTICS Temperature Coefficient Short Time Overload Terminal Strength Operating Temperature Range Dielectric Withstanding Voltage Maximum Working Voltage ppm/C lb C VAC V Temperature Coefficient Short Time Overload Terminal Strength Operating Temperature Range Dielectric Withstanding Voltage ppm/C lb C VAC 400 5 x rated power for 5 seconds 10 minimum - 65/+ 275 1000 (P x R)1/2 METAL OXIDE CHARACTERISTICS 400 5 x rated power for 5 seconds 10 minimum - 65/+ 225 1000 V (P x R)1/2 Maximum Working Voltage GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: CP000515R00JE663 C P 0 GLOBAL MODEL (See Standard Electrical Specifications Global Model column for options) www.vishay.com 40 0 0 5 1 VALUE R = Decimal K = Thousand R1500 = 0.15 1K500 = 1500 5 R 0 TOLERANCE J = 5.0 % K = 10 % 0 J E 6 6 3 PACKAGING E66 = Lead (Pb)-free, bulk For technical questions, contact ww2aresistors@vishay.com SPECIAL (Dash Number) (up to 3 digits) From 1-999 as applicable Document Number 30113 Revision 12-Jan-06 CP High Volume Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead DIMENSIONS CPxxxx LL DIMENSIONS in millimeters [inches] GLOBAL MODEL W LD L H CPxxxx...3 L LL H H1 0.125 [3.18] Typical LD W L* 1.5 [0.060] W H H1 LD LL 1.0 1.0 1.5 0.05 3.0 [0.040] [0.040] [0.060] [0.002] [0.120] CP0002 18 [0.71] 7 [0.276] 7 [0.276] -- 0.65 35 [0.0256] [1.378] CP0003 22 [0.87] 8 [0.315] 8 [0.315] -- 0.8 [0.031] 35 [1.378] CP0005 22 [0.87] 10 [0.394] 9 [0.354] -- 0.8 [0.031] 35 [1.378] CP0005...3 22 [0.87] 10 [0.394] 9 [0.354] 10.5 [0.413] 0.8 [0.031] 35 [1.378] CP0007 35 [1.38] 10 [0.394] 9 [0.354] -- 0.8 [0.031] 35 [1.378] CP0007...3 35 [1.38] 10 [0.394] 9 [0.354] 12 [0.472] 0.8 [0.031] 35 [1.378] CP0010 48 [1.89] 10 [0.394] 9 [0.354] -- 0.8 [0.031] 35 [1.378] CP0010...3 48 [1.89] 10 [0.394] 9 [0.354] 12 [0.472] 0.8 [0.031] 35 [1.378] CP0015 48 [1.89] 12.5 [0.492] 11.5 [0.453] -- 0.8 [0.031] 35 [1.378] CP0020 60 [2.36] 14 [0.551] 13.5 [0.531] -- 0.8 [0.031] 35 [1.378] MATERIAL SPECIFICATIONS Element: Wirewound = Copper-nickel alloy or nickel chrome alloy, depending on resistance value Metal Oxide = High temperature fired Metal Oxide film Core: Wirewound = Woven fiberglass Metal Oxide = Ceramic RATED POWER IN % * Potting compound may extend outside of ceramic case up to 1.52 mm [0.060"] maximum per side. Body: Steatite ceramic case with cement potting compound 120 100 80 60 Wirewound 40 Metal Oxide 20 0 - 65 - 25 End Caps: Tin plated steel 25 75 125 175 225 275 40 Terminals: Tinned copper Derating AMBIENT TEMPERATURE IN C Part Marking: DALE, Model, Wattage, Value, Tolerance, Date Code PERFORMANCE TEST CONDITIONS OF TEST Thermal Shock - 55 C to + 275 C (+ 225 C for Metal Oxide), 5 cycles, 30 minute dwell time (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 seconds (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 Vrms for one minute (2.0 % + 0.05 ) R Low Temperature Operation - 65 C, full rated working voltage for 45 minutes (3.0 % + 0.05 ) R Humidity 75 C, 90 % - 100 % RH, 240 hours (5.0 % + 0.05 ) R Load Life 1000 hours at rated power, + 25 C, 1.5 hours "ON", 0.5 hours "OFF" (10.0 % + 0.05 ) R Terminal Strength 5 pounds for 30 seconds; body twisted about axis, 3 360 rotations (2.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 seconds in molten solder at 1/8" to 3/16" from body (4.0 % + 0.05 ) R Document Number 30113 Revision 12-Jan-06 For technical questions, contact ww2aresistors@vishay.com TEST LIMITS www.vishay.com 41 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1