DIAZED AND NEOZED ACCESSORIES SCREW CAP The Screw Cap types offered fit the various fuse and Fuse Base sizes. They hold the fuses in place and connect the head of the fuse with the load side of the Fuse Holder. The colored blown fuse indicator on the head of the fuse is clearly visible through a small window in the top of the Screw Cap. A small test hole on the side of the Cap allows for a probe to test if voltage is present on the metallic surface on the head of the fuse. ADAPTER SCREW / RING Adapter Screws are used with the Diazed, and Adapter Rings are used with the Neozed Fuses. Three sizes of Screws and Rings are available to fit the diameter of the different size fuse bases. Adapter Screws are porcelain rings with a center hole on one side, a threaded stud on the other and one notch on each side. The inside diameter of the center hole of the Adapter Screw matches the diameter of the tip of the Diazed fuse for which it is intended. This helps to eliminate the insertion of fuses with higher current ratings than allowed. The integral threaded stud installs into the appropriate Diazed Fuse Base. Adapter Screws and Rings are color coded to the fuses. FUSE BASE Fuse Bases hold fuses in place (in conjunction with the Screw Cap) and insure proper electrical connections. They snap easily onto standard 35mm DIN rail or can be panel mounted. They are available in one or three pole designs. Matching Covers are available. The line is connected to the metal tab at the bottom of the fuse base. The load is connected to the metal ring into which the Screw Cap is installed. FUSE BASE COVER Fuse Base Covers are available in one and three pole designs to match the Fuse Bases we offer. They help prevent shock from accidental touching of conducting metal parts on the Base. TOOLS The Adapter Screw / Ring Tools aid in the insertion and removal of the Adapters from the Fuse Base. The Adapter Screw Tool fits into notches on the Adapter Screw for the D27 and D33 Diazed fuses. The Adapter Ring Tool fits the Adapter Rings for the D01, D02 and D03 Neozed fuses. We strongly recommend these tools be used when inserting or removing Adapter Screws or Rings to prevent electrical shocks. Thread Diazed Screw Cap Screw Cap Fuse Head Cat. No. Approx. Dim. mm (in.) Use With Height Thread Dia. Fuse(s) D16C D27C D33C 34 (1.34) 43 (1.69) 43 (1.69) 16 (.63) 27 (1.06) 33 (1.30) ND-E 16 DII-E 27 DIII-E 33 Fuse Body Fuse Tip Adapter Screw Fuse Base Cover Diazed Adapter Screw Tool Use With Fuse (s) Cat. No. Fuse Base DAT DII-E 27, DIII-E 33 The Neozed System Screw Cap Thread Fuse Head Fuse Tip Adapter Ring Neozed Screw Cap Cat. No. Approx. Dim. mm (in.) Use With Height Thread Dia. Fuse(s) NZ01C NZ02C NZ03C 31 (1.22) 31 (1.22) 37 (1.46) Fuse Body 14 (.55) 18 (.71) 30 (1.18) D01 D02 D03 Fuse Base Cover Neozed Adapter Ring Tool Fuse Base Cat. No. NAT 10 The Diazed System Use With Fuse(s) D01, D02, D03 Altech Corp.(R) 35 Royal Road Flemington NJ 08822-6000 Phone (908) 806-9400 Fax (908) 806-9490 www.altechcorp.com Diazed Adapter Screw Cat. No. Current Color For Fuse Type DII-E 27 D27AS02 2A Pink D27AS04 4A Brown D27AS06 6A Green D27AS10 10A Red D27AS16 16A Gray D27AS20 20A Blue D27AS25 25A Yellow Height : 14mm (.55 in.) For Fuse Type DIII-E 33 D33AS35 35A Black D33AS40 40A Black D33AS50 50A White D33AS63 63A Copper Height : 14mm (.55 in.) Use With Fuse(s) 2D27SB(FB)(SC) 4D27SB(FB)(SC) 6D27SB(FB)(SC) 10D27SB(FB)(SC) 16D27SB(FB)(SC) 20D27SB(FB)(SC) 25D27SB(FB)(SC) Diazed Fuse Base No. of Cat. Poles No. 1 1 1 Diazed Fuse Base Cover Use With Fuse(s) No. of Poles Cat. No. Approx. Dim. mm (in.) Height Width D16BC 20 (.79) D27BC 20 (.79) D33BC 20 (.79) Use With Fuse(s) D16B D27B D33B 45 (1.77) 29 (1.14) ND-E 16 46 (1.81) 38 (1.50) DII-E 27 48 (1.89) 49 (1.93) DIII-E 33 1 1 1 3 D27B3 3 D33B3 46 (1.81) 90 (3.54) DII-E 27 46 (1.81) 109 (4.29) DIII-E 33 3 D27BC3 20 (.79) 90 (3.54) DII-E 27 3 D33BC3 20 (.79) 111 (4.37) DIII-E 33 40 (1.57) ND-E 16 40 (1.57) DII-E 27 49 (1.93) DIII-E 33 35D33SB(FB)(SC) 40D33SB(FB)(SC) 50D33SB(FB)(SC) 63D33SB(FB)(SC) Neozed Fuse Base Neozed Adapter Ring Cat. No. Approx. Dim. mm (in.) Height Width Current Color For Fuse Type D01 NZ01AR02 2A Pink NZ01AR04 4A Brown NZ01AR06 6A Green NZ01AR10 10A Red Height : 10mm (.39 in.) For Fuse Type D02 NZ02AR20 20A Blue NZ02AR25 25A Yellow NZ02AR35 35A Black NZ02AR50 50A White Height : 10mm (.39 in.) For Fuse Type D03 NZ03AR80 80A Silver Height : 10mm (.39 in.) Use With Fuse(s) 2NZ01GL(SC) 4NZ01GL(SC) 6NZ01GL(SC) 10NZ01GL(SC) No. of Cat. Poles No. Approx. Dim. mm (in.) Height Width Neozed Fuse Base Cover Use With Fuse(s) No. of Poles Cat. No. Approx. Dim. mm (in.) Height Width Use With Fuse(s) 1 1 1 NZ01B 42 (1.65) 27 (1.06) NZ02B 42 (1.65) 27 (1.06) NZ03B 46 (1.81) 44 (1.73) D01 D02 D03 1 1 1 NZ01BC 23 (.91) 27 (1.06) NZ02BC 23 (.91) 27 (1.06) NZ03BC 18 (.71) 44 (1.73) D01 D02 D03 3 3 NZ01B3 42 (1.65) 81 (3.19) NZ02B3 42 (1.65) 81 (3.19) D01 D02 3 NZ01BC3 23 (.91) 81 (3.19) 3 NZ02BC3 23 (.91) 81 (3.19) D01 D02 20NZ02GL(SC) 25NZ02GL(SC) 35NZ02GL(SC) 50NZ02GL(SC) 80NZ03GL(SC) Altech Corp.(R) 35 Royal Road Flemington NJ 08822-6000 Phone (908) 806-9400 Fax (908) 806-9490 www.altechcorp.com 11 Fuse Holders, 10 x 38 mm and CC Type 1 POLE 2 POLE 3 POLE 17.5 mm 35 mm 52.5 mm Height x Length 81 x 64.5 mm 81 x 64.5 mm 81 x 64.5 mm Stripping Length 11 mm 11 mm 11 mm Insulation Material Aculon (R) Aculon (R) Aculon (R) Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps 1.5-25sq.mm / 24-4 AWG 1.5-25sq.mm / 24-4 AWG 1.5-25sq.mm / 24-4 AWG 690 V / 32A 690 V / 32A 690 V / 32A The main characteristics of fuse disconnectors are: * UL recognized (10x38mm) * UL listed (CC Type) * Compliance with IEC 60947-1, IEC 60947-3 * Plastic parts are made of material resistant to high temperatures * All contact surfaces are silver plated * Mounting on standard DIN 35 mm rail (DIN EN60715). * Available up to 4 pole * For all sizes a version with electronic indicator is available. There are two technical types of indicator: L (LED) (10x38mm only) with built in LED diode which blinks after the fuse-link operates. The internal circuit resistance is 2M, thus the total dissipation is minimal. The indicator is capable of operating in conditions of open circuit with minimum capacitance be-tween connection cables. Operating voltage range spans from 50V to 690V AC and DC. Terminal Width (B) Wire Range Rating Rating Torque Cylindrical 10x38 Indicator: None LED Neon 600 V AC/DC / 30A 600 V AC/DC / 30A 2-2.5 Nm / 31 lb-in Cat. No. 2-2.5 Nm / 31 lb-in Std. Pk. CB1038-1 CB1038-1/L CB1038-1/I Cat. No. CB1038-2 CB1038-2/L CB1038-2/I 1 1 1 O10 x 38 mm Type of Fuse Used Std. Pk. 1 1 1 600 V AC/DC / 30A 2-2.5 Nm / 31 lb-in Cat. No. Std. Pk. CB1038-3 CB1038-3/L CB1038-3/I O10 x 38 mm 1 1 1 O10 x 38 mm Approvals** E212627 CC Type Holder I (NEON) (10x38mm only) with neon lamp, which is constantly lit after the fuselink operates. The internal Type of Fuse Used circuit resistance is 570k, thus it is necessary that the Approvals circuit be closed in order for the indicator to function. The operational voltage range is DIN Rail for ordering information 100 V to 750 V AC. Cat. No. E212627 Std. Pk. CB10CC-1 1 Cat. No. Std. Pk. CB10CC-2 CC Type 1 E212627 Cat. No. CB10CC-3 CC Type E212627 Std. Pk. 1 CC Type E212627 E212627 refer to pages 90-91 * Fuses are sold separately Altech, see pages 100-101. **1000V UL PV rating pending. End Stop for ordering information refer to page 92 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 79 mm (3.11 in.) 64.5 mm (2.54 in.) 47.5 mm (1.87 in.) 37 mm (1.46 in.) CC Type 14 4 mm (0.16 in.) B 81 mm (3.19 in.) Cylindrical 10 x 38 Dimension for B: 1 Pole 1 Pole + Neutral 2 Pole 3 Pole 3 Pole + Neutral 17.5mm 35mm 35mm 52.5mm 70mm Altech Corp.(R) 35 Royal Road Flemington NJ 08822-6000 Phone (908) 806-9400 Fax (908) 806-9490 www.altechcorp.com Cylinder Fuse Holders, 8 x 31 mm, 14 x 51 mm and 22 x 58 mm 8 x 31 14 x 51 22 x 58 17.5 mm (0.69 in.) 17.5 mm (0.69 in.) 35 mm (1.38 in.) 35 mm (1.38 in.) 35 mm (1.38 in.) 52.5 mm (2.07 in.) 52.5 mm (2.07 in.) 70 mm (2.76 in.) 27 mm (1.07 in.) 27 mm (1.07 in.) 54 mm (2.15 in.) 54 mm (2.15 in.) 54 mm (2.15 in.) 81 mm (3.20 in.) 81 mm (3.20 in.) 108 mm (4.25 in.) 27 mm (1.07 in.) 27 mm (1.07 in.) 71 mm (2.80 in.) 71 mm (2.80 in.) 71 mm (2.80 in.) 107 mm (4.20 in.) 107 mm (4.20 in.) 142.5 mm (5.60 in.) 81 x 64.5 mm (3.20 x 2.40 in) 94 x 70 mm (3.70 x 2.76 in) 120.5 x 70 mm (4.73 x 2.76 in) Insulation Material Aculon (R) Aculon (R) Aculon (R) Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps Mininum Max. Stranded Max. Solid 1 sq mm (18 AWG) 16 sq mm (6 AWG) 25 sq mm (4 AWG) 1 sq mm (18 AWG) 25 sq mm (4 AWG) 35 sq mm (2 AWG) 1.5 sq mm (16 AWG) 35 sq mm (2 AWG) 50 sq mm (1 AWG) Rating 600V AC/DC / 30A 600V AC/DC / 50A N/A Rating 400V AC/DC / 20A 400V AC/DC / 50A 500V AC/DC / 32A 690V AC/DC / 25A 400V AC/DC / 125A 500V AC/DC / 100A 690V AC/DC / 80A 2-2.5 Nm / 31 lb-in 2.5 Nm / 22 lb-in 3 Nm / 26 lb-in Fuse Bases secure the fuses in place and insure proper electrical connections. Fuse Bases are available in one, two, three and four pole designs. Types 8x31 and 10x38 are easily DIN rail mounted; Types 14x51 and 22x58 can be DIN rail Terminal Width mounted or mounted to 1 pole: any flat surface. Cylinder 1 pole + indicator: Fuse Bases are available 1 pole + N: with optional blown fuse 2 pole: indication. The main characteristics of fuse disconnectors are: * UL recognized (8x31 and 14x51 mm only) * Compliance with IEC 60947-1, IEC 60947-3 * Plastic parts are made of material resistant to high temperatures * All contact surfaces are silver plated * Mounting on standard DIN 35 mm rail (DIN EN60715). * Available up to 4 pole * For all sizes a version with electronic indicator is available. 2 pole + indicator: 3 pole: 3 pole + indicator 3 pole + N: Height x Length Wire Range Torque The 8x31 fuse holders Type with indicator are built with a NEON lamp, which 1 pole: is constantly lit after the 1 pole + indicator: fuselink operates. The 1 pole + N: internal circuit resistance 2 pole: is 570k, thus it is neces2 pole + indicator: sary that the circuit be 3 pole: closed in order for the 3 pole + indicator indicator to function. The 3 pole + N: operational voltage range is 100 V to 750 V AC. Type of Fuse Used The 14x51 and 22x58 fuse Approvals** holders with indicator have a built in LED which blinks after the fuse-link operDIN Rail ates. The internal circuit resistance is 2M, thus the total dissipation is minimal. The indicator is End Stop capable of operating in conditions of open circuit with minimum capacitance between connection cables. Operating voltage range spans from 50V to 690V AC and DC. Cat. No. Std. Pk. 12 12 6 6 6 4 4 3 CB831-1 CB831-1/I CB831-1N CB831-2 CB831-2/I CB831-3 CB831-3/I CB831-3N Cat. No. Cat. No. Std. Pk. 3 3 2 2 2 1 1 1 CB2258-1 CB2258-1/I CB2258-1N CB2258-2 CB2258-2/I CB2258-3 CB2258-3/I CB2258-3N 14x51 mm E212627 50 50 12 12 6 6 6 4 4 3 CB1451-1 CB1451-1/I CB1451-1N CB1451-2 CB1451-2/I CB1451-3 CB1451-3/I CB1451-3N 8x32 mm CA702 CA802 Std. Pk. 22x58 mm E212627 CA702 CA802 50 50 CA702 CA802 50 50 * Fuses are sold separately. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 15 NH FUSE ACCESSORIES FUSE BASE Fuse Bases hold fuses in place and insure proper electrical connections. Available in one or three pole designs. Three-pole Fuse Bases are supplied with two Separator Plates which should be installed between poles. We recommend the use of End Plates and Terminal Covers for increased safety. END PLATE End Plates increase safety and provide separation between devices. Install by inserting End Plate into mounting entry slot on right or left side of Fuse Base. We recommend installing one End Plate on each side of the Fuse Base. TERMINAL COVER Covers increase safety by covering the conducting metal hardware of the Fuse Base and the Fuse. We suggest Terminal Covers be used in conjunction with End Plates. To install slide Terminal Cover over terminal slot and snap in place. MICROSWITCH Microswitches can be field mounted on NH fuses for remote blown fuse indication. (Sketch below) Fuse Base Fuse End Plate No. of Poles Cat. No. Length mm (in.) Use With Fuse(s) 1 3 NHB00-1 NHB00-3 122 (4.80) 139 (5.47) NH00 NH00 1 NHB0-1 170 (6.69) NH0 NHEP0 62 (2.44) 180 (7.09) NHB0-1-3 1 3 NHB1-1 NHB1-3 202 (7.95) 214 (8.42) NH1 NH1 NHEP1 62 (2.44) 214 (8.42) NHB1-1-3 1 3 NHB2-1 NHB2-3 227 (8.94) 260 (10.24) NH2 NH2 NHEP2 90 (3.54) 260 (10.24) NHB2-1-3 1 NHB3-1 242 (9.53) NH3 NHEP3 101 (3.98) 242 (9.53) NHB3-1-3 1 NHB4-1 310 (12.20) NH4 1 NHB4A-1 338 (13.31) NH4A 1 NHSMB 146 (5.75) NH00SM Cat. No. NHEP00 62 (2.44) 121 (4.76) Microswitch Microswitch Fuse Cat. No. NHMS Current/ Voltage Approx.Dim. mm (in.) Use With Width Length Fuse Base(s) NHB00-1-3 Terminal Cover Use With Fuse(s) 5/250V AC NH Knife Blade (SPDT) or NH Stud Mount (All Sizes) Cat. No. Use With Fuse Base(s) NHTC00 NHB00-1-3 FUSE HANDLE We strongly suggest using the Fuse Handle when inserting or removing fuses from the Fuse Base to prevent electrical shocks. For increased safety, use Fuse Handle with integral safety glove. Both Fuse Handles are for use with NH-Knife Blade Fuses, NH00 - NH4. Fuse Handle Cat. No. Description NHHA Fuse Handle NHSG Fuse Handle with Safety Glove For maximum protection use Fuse Handle with integral safety glove, not shown. Altech Corp.(R) 35 Royal Road Flemington NJ 08822-6000 Phone (908) 806-9400 Fax (908) 806-9490 www.altechcorp.com 19 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Altech: CB1451-1 CB1451-3 CB2258-1 CB2258-3 D16C NHB1-1-BASE NHB1-3 NHB1-1 CB2258-1/I NHB3-1 CB1451-1N NHTC00 NHB4-1 NHEP00 NHB0-1 CB1451-2 NHB00-1 NHB0-3 CB1038-1N NHB00-3