10 Altech Corp.® ● 35 Royal Road Flemington NJ 08822-6000 ● Phone (908) 806-9400 ● Fax (908) 806-9490 ● www.altechcorp.com
Thread
➛
Diazed Screw Cap
Approx.
Dim. mm (in.) Use With
Cat. No. Height Thread Dia. Fuse(s)
D16C 34 (1.34) 16 (.63) ND-E 16
D27C 43 (1.69) 27 (1.06) DII-E 27
D33C 43 (1.69) 33 (1.30) DIII-E 33
Diazed Adapter Screw Tool
Use With
Cat. No. Fuse (s)
DAT DII-E 27, DIII-E 33
Neozed Screw Cap
Approx.
Dim. mm (in.) Use With
Cat. No. Height Thread Dia. Fuse(s)
NZ01C 31 (1.22) 14 (.55) D01
NZ02C 31 (1.22) 18 (.71) D02
NZ03C 37 (1.46) 30 (1.18) D03
Thread
➛
Neozed Adapter Ring Tool
Use With
Cat. No. Fuse(s)
NAT D01, D02, D03
DIAZED AND NEOZED
ACCESSORIES
SCREW CAP
The Screw Cap types offered fit the
various fuse and Fuse Base sizes. They
hold the fuses in place and connect the
head of the fuse with the load side of the
Fuse Holder. The colored blown fuse
indicator on the head of the fuse is
clearly visible through a small window in
the top of the Screw Cap. A small test
hole on the side of the Cap allows for a
probe to test if voltage is present on the
metallic surface on the head of the fuse.
ADAPTER SCREW / RING
Adapter Screws are used with the
Diazed, and Adapter Rings are used with
the Neozed Fuses. Three sizes of
Screws and Rings are available to fit the
diameter of the different size fuse bases.
Adapter Screws are porcelain rings with a
center hole on one side, a threaded stud
on the other and one notch on each side.
The inside diameter of the center hole of
the Adapter Screw matches the diameter
of the tip of the Diazed fuse for which it is
intended. This helps to eliminate the
insertion of fuses with higher current
ratings than allowed. The integral
threaded stud installs into the appropriate
Diazed Fuse Base. Adapter Screws and
Rings are color coded to the fuses.
FUSE BASE
Fuse Bases hold fuses in place (in
conjunction with the Screw Cap) and
insure proper electrical connections.
They snap easily onto standard 35mm
DIN rail or can be panel mounted. They
are available in one or three pole
designs. Matching Covers are available.
The line is connected to the metal tab at
the bottom of the fuse base. The load is
connected to the metal ring into which
the Screw Cap is installed.
FUSE BASE COVER
Fuse Base Covers are available in one
and three pole designs to match the Fuse
Bases we offer. They help prevent shock
from accidental touching of conducting
metal parts on the Base.
TOOLS
The Adapter Screw / Ring Tools aid in
the insertion and removal of the Adapters
from the Fuse Base. The Adapter Screw
Tool fits into notches on the Adapter
Screw for the D27 and D33 Diazed
fuses. The Adapter Ring Tool fits the
Adapter Rings for the D01, D02 and D03
Neozed fuses. We strongly recommend
these tools be used when inserting or
removing Adapter Screws or Rings to
prevent electrical shocks.
Screw Cap
The Diazed System
Fuse Head
Fuse Body
Fuse Tip
Adapter
Screw
Fuse
Base Cover
Fuse Base
Screw Cap
The Neozed System
Fuse Head
Fuse Body
Fuse Tip
Adapter
Ring
Fuse
Base Cover
Fuse Base