Modifications in the sense of technical progress are reserved DESIGNED BY: E.Bunke APPROVED BY: R.Rippl DATE : 2003-05-19
Page 1 of 1 [VRRp-02.doc] REVISION / Rev. No.: 00 REVISED BY: APPROVED BY: DATE :
Reed Relay: BE24-1A71-P
Headquarter Europe
MEDER electronic AG
Friedrich-List Strasse 6
D-78234 Engen-Welschingen
Tel.: +49(0)7733-9487-0
Fax: +49(0)7733-9487-32
eMail: info@meder.com
Internet: www.meder.com
Headquarter USA
MEDER electronic Inc.
766 Falmouth Rd
Mashpee, MA 02649
Phone: +1/ 508-539-0002
Fax: +1/ 508-539-4088
eMail: salesusa@meder.com
Part Number: 8824171100
Dimensions (mm) Layout / Pitch 2,54 mm / Top View Marking
MEDER-Label
Type
Layout
Production-
Code-
EN60062
/Factory Code
Pins: ∅ 0,65 mm / L 3,2 ± 0,3 mm
Coil/Relay Characteristics Conditions at 20°C Min. Typ. Max. Units
Coil Resistance 2957 3285 3613 Ω
Nominal Voltage 24 VDC
Nominal Rated Power 175 mW
Thermal Resistance 72 K / W
Operate Voltage 16,8 VDC
Release Voltage 1,4 VDC
Contact Data 71 (Form A/Dry)
Contact Rating
Any combination of the switching voltage
and current must not exceed the given
rated power
10 W
Switching Voltage DC or Peak AC 200 V
Switching Current DC or Peak AC 0,5 A
Carry Current DC or Peak AC 1 A
Static Contact Resistance (initial) Measured with Nominal Voltage 150 mΩ
Insulation Resistance RH 45% 1010 Ω
Breakdown Voltage 250 VDC
Operate Time including Bounce Measured with Nominal Voltage 0,5 ms
Release Time Measured with no coil suppression 0,2 ms
Capacitance 0,3 pF
Environmental Data
Insulation Resistance Coil to Contact RH 45% 1012 Ω
Dielectric Strength Coil to Contact 2 kV AC
Shock ½ sine wave, duration 11ms 50 g
Vibration from 10 - 2000 Hz 20 g
Operating Temperature 10°C/min max. allowable -20 70 °C
Storage Temperature 10°C/min max. allowable -40 105 °C
Soldering Temperature 5 sec. at 260 °C
Cleaning fully sealed
Material of Case Plastics / Polycarbonat
Sealing Compound Polyurethan
Material of Pins Cu-alloy tinned
Remarks
Customer / Customer part number Standard Part
