2013-3- 2012.11.22 11:22 PM 71 G4-1.25G(Mac 1) JETPDF 2400DPI 175LPI T SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS CD Chip type, Extremely Low Impedance Series Low Impedance Solvent Proof *Chip type, low impedance temperature range up to 105 C *Designed for surface mounting on high density PC board *Applicable to automatic insertion machine using carrier tape *Complied to the RoHS directive Item Operating temperature range Leakage current max. Capacitance tolerance Dissipation factor max. (at 120Hz, 20 C) Low temperature characteristics (Impedance ratio at 120Hz) Load life (after application of the rated voltage for 2000 hours at 105 C) Characteristics -55 ~ +105 C I = 0.01CV or 3 A whichever is greater (after 2 minutes) 20% at 120Hz, 20 C WV tan 6.3 0.24 WV Z-25 C/Z+20 C Z-55 C/Z+20 C Leakage current Capacitance change tan 10 0.19 6.3 2 3 16 0.16 10 2 3 25 0.14 16 2 3 25 2 3 35 0.12 50 0.12 35 2 3 50 2 3 Less than specified value Within 25% of initial value Less than 200% of specified value After 1000 hours no load test, leakage current, capacitance and tanare same as load life value. The measurement shall be performed at 20 C by the KS C 6035 clause 5.4. Resistance to soldering heat The following specifications shall be satisfied when the capacitors are restored to 20 C after exposing them at 250 C for 10 seconds. Less than specified value Leakage current Within 10% of initial value Capacitance change Less than specified value tan Unit : mm DRAWING -Series code of CD is "D" D (O6.3x5.8, 7.7, O8x6.2) OD 6.3x5.8 6.3x7.7 8x6.2 8x10 10x10 A 2.4 2.4 3.3 2.9 3.2 B 6.6 6.6 8.3 8.3 10.3 C 6.6 6.6 8.3 8.3 10.3 E 2.2 2.2 2.3 3.1 4.5 R 0.5~0.8 0.5~0.8 0.5~0.8 0.8~1.1 0.8~1.1 D (O8x10, O10x10) 71 CHIP TYPES Shelf life (at 105 C) 2013-3- 2012.11.22 11:22 PM 72 G4-1.25G(Mac 1) JETPDF 2400DPI 175LPI T SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS CD series DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV F 6.3 10 16 25 35 50 10 6.3x5.8 0.86 170 15 6.3x5.8 0.86 170 22 6.3x5.8 0.86 170 6.3x7.7 0.66 280 6.3x5.8 0.39 240 6.3x5.8 0.39 240 6.3x5.8 0.39 240 33 8x6.2 0.63 300 6.3x7.7 0.66 280 6.3x5.8 0.39 240 6.3x5.8 0.39 240 6.3x5.8 0.39 240 6.3x5.8 0.39 240 47 68 6.3x5.8 0.36 240 6.3x5.8 0.36 240 6.3x5.8 0.36 240 6.3x5.8 0.36 240 6.3x7.7 0.32 290 8x6.2 0.63 300 8x10 0.32 350 6.3x7.7 0.32 290 100 6.3x5.8 0.36 240 6.3x5.8 0.36 240 6.3x5.8 0.36 240 150 6.3x5.8 0.36 240 6.3x5.8 0.36 240 6.3x7.7 0.32 290 220 6.3x5.8 0.36 240 8x10 0.16 600 10x10 0.16 700 8x10 0.16 600 8x6.2 0.26 300 8x10 0.16 600 8x10 0.16 600 10x10 0.08 850 6.3x7.7 0.32 290 6.3x7.7 0.32 290 8x6.2 0.26 300 8x6.2 0.26 300 8x10 0.16 600 0.16 600 10x10 0.10 850 8x10 0.16 600 10x10 0.08 850 6.3x7.7 0.32 290 330 8x6.2 0.26 300 470 8x10 0.16 600 680 8x10 0.16 600 10x10 0.08 850 1000 10x10 0.08 850 1500 10x10 0.08 850 8x10 Ripple current (mA r ms) at 105 C, 100kHz Impedance () at 20 C, 100kHz Case size OD X L (mm) FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT 72 Frequency 50Hz 120Hz 300Hz 1kHz 10kHz Coefficient 0.35 0.5 0.64 0.83 1.00