This is information on a product in full production.
November 2013 DocID023737 Rev 4 1/23
23
STB100N10F7, STD100N10F7,
STF100N10F7, STP100N10F7
N-channel 100 V, 0.0068 Ω typ., 80 A, STripFET™ VII DeepGATE™
Power MOSFET in D2PAK, DPAK, TO-220FP and TO-220
Datasheet
-
production data
Figure 1. Internal schematic diagram
Features
•Ultra low on-resistance
•100% avalanche tested
Applications
•Switching applications
Description
These devices utilize the 7
th
generation of design
rules of ST’s proprietary STripFET™ technology,
with a new gate structure. The resulting Power
MOSFET exhibits the lowest R
DS(on)
in all
packages.
TO-220
123
TA B
DPAK
12
3
TO-220FP
1
3
TAB
D
2
PAK
1
3
TAB
$0Y
'Ć7$%
*
6
Order code s V
DS
R
DS(on)
max I
D
P
TOT
STB100N10F7
100 V 0.008 Ω
80 A 120 W
STD100N10F7 80 A 120W
STF100N10F7 45 A 30 W
STP100N10F7 80A 150 W
Table 1. Device summary
Order codes Marking Packages Packaging
STB100N10F7
100N10F7
D
2
PAK Tape and reel
STD100N10F7 DPAK Tape and reel
STF100N10F7 TO-220FP Tube
STP100N10F7 TO-220 Tube
www.st.com
Contents STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
2/23 DocID023737 Rev 4
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DocID023737 Rev 4 3/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Electrical ratings
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter
Value
Unit
DPAK TO-220FP TO-220
D
2
PAK
V
DS
Drain-source voltage 100 V
V
GS
Gate-source voltage ± 20 V
I
D
Drain current (continuous) at T
C
= 25 °C 80 45
(1)
1. This value is limited by package.
.
80 A
IDDrain current (continuous) at TC = 100 °C 62 32(1) 70 A
IDM(2)
2. Pulse width limited by safe operating area.
Drain current (pulsed) 320 180 320 A
P
TOT (1)
Total dissipation at T
C
= 25 °C 120 30 150 W
T
J
Operating junction temperature -55 to 175 °C
T
stg
Storage temperature °C
Table 3. Thermal resistance
Symbol Parameter Value Unit
D
2
PAK DPAK TO-220FP TO-220
R
thj-case
Thermal resistance junction-case 1 1.25 5 1 °C/W
R
thj-amb
Thermal resistance junction-
ambient 62.50 °C/W
R
thj-pcb (1)
1. When mounted on FR-4 board of 1inch², 2oz Cu, t < 10 sec
Thermal resistance junction-pcb 30 50 °C/W
Table 4. Avalanche characteristics
Symbol Parameter Value Unit
E
AS
Single pulse avalanche energy
(T
J
= 25 °C, L = 3.5 mH, I
AS
= 15 A, V
DD
= 50 V, V
GS
= 10 V) 400 mJ
Electrical characteristics STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
4/23 DocID023737 Rev 4
2 Electrical characteristics
(T
CASE
=25 °C unless otherwise specified)
Table 5. On/off states
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
(BR)DSS
Drain-source breakdown
voltage (V
GS
= 0) I
D
= 250 μA 100 - V
I
DSS
Zero gate voltage drain
current (V
GS
= 0)
V
DS
= 100 V
V
DS
= 100 V; T
C
=125 °C
1
100
μA
μA
I
GSS
Gate body leakage current
(V
DS
= 0) V
GS
= 20 V 100 nA
V
GS(th)
Gate threshold voltage V
DS
= V
GS
, I
D
= 250 μA2.5 4.5V
R
DS(on)
Static drain-source on-
resistance
For D
2
PAK, DPAK and
TO-220
V
GS
= 10 V, I
D
= 40 A
For TO-220-FP
V
GS
= 10 V, I
D
= 22.5 A
0.0068 0.008 Ω
Table 6. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
C
iss
Input capacitance
V
DS
=50 V, f=1 MHz,
V
GS
=0
- 4369 - pF
C
oss
Output capacitance - 823 - pF
C
rss
Reverse transfer
capacitance -36 - pF
Q
g
Total gate charge V
DD
=50 V, I
D
= 80 A
V
GS
=10 V
Figure 18
-61 -nC
Q
gs
Gate-source charge - 26 - nC
Q
gd
Gate-drain charge - 13 - nC
Table 7. Switching times
Symbol Parameter Test conditions M in. Typ. Max. Unit
t
d(on)
Turn-on delay time
V
DD
=50 V, I
D
= 40 A,
R
G
=4.7 Ω, V
GS
= 10 V
Figure 17
-27 - ns
t
r
Rise time - 40 - ns
t
d(off)
Turn-off delay time - 46 - ns
t
f
Fall time - 15 - ns
DocID023737 Rev 4 5/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Electrical characteristics
Table 8. Source drain diode
Symbol Parameter Test conditions Min Typ. Max Unit
I
SD
Source-drain current - 80 A
I
SDM(1)
1. Pulse width limited by safe operating area
Source-drain current (pulsed) - 320 A
V
SD(2)
2. Pulsed: pulse duration=300 μs, duty cycle 1.5%
Forward on voltage I
SD
= 80 A, V
GS
=0 - 1.2 V
t
rr
Reverse recovery time I
SD
= 80 A,
di/dt = 100 A/μs,
V
DD
=80 V, T
j
=150 °C
-77 ns
Q
rr
Reverse recovery charge - 146 nC
I
RRM
Reverse recovery current - 4 A
Electrical characteristics STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
6/23 DocID023737 Rev 4
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area f or DPAK Figure 3. Thermal impedance for DPAK
I
D
100
10
1
0.1 1100 V
DS
(V)
10
(A)
Operation in this area is
Limited by max RDS(on)
100µs
1ms
10ms
Tj=175°C
Tc=2 5°C
Single pulse
0.1
AM15754v1
Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP
I
D
100
10
1
0.1 1100 V
DS
(V)
10
(A)
Operation in this area is
Limited by max RDS(on)
100µs
1ms
10ms
Tj=175°C
Tc=2 5°C
Single pulse
0.1
AM15755v1
Figure 6. Safe operating area for D
2
PAK and
TO-220 Figure 7. Thermal impedance for D
2
PAK and
TO-220
I
D
100
10
1
0.1 1100 V
DS
(V)
10
(A)
Operation in this area is
Limited by max RDS(on)
100µs
1ms
10ms
Tj=175°C
Tc=2 5°C
Single pulse
0.1
AM15756v1
Single pulse
0.05
0.02
0.01
δ=0.5
0.1
0.2
K
10 t
p
(s)
-4 10-3 10-2
10-1
10-5
10-2
10-1
AM15761v1
DocID023737 Rev 4 7/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Electrical characteristics
Figure 8. Output characteristics Figure 9. Transfer characteristics
Figure 10. Normalized V
(BR)DSS
vs temperature Figure 11. Static drain-source on-resistance
Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations
I
D
150
100
50
0
02V
DS
(V)
4
(A)
13
200
250
V
GS
=10V
300
6V
7V
8V
9V
5V
AM15757v1
I
D
150
100
50
0
V
GS
(V)
(A)
2
200
250
300
V
DS
=5V
345678910
AM15745v1
V
(BR)DSS
T
J
(°C)
(norm) I
D
=1mA
1.02
0.98
0.96
0.94
-55 -5
-30 70
20 45 95 120
1
1.04
AM15747v1
R
DS(on)
6.0
4.0
2.0
0.0
040 I
D
(A)
(mΩ)
20 60
8.0
10.0
12.0
14.0 V
GS
=10V
100
80
AM15748v1
V
GS
6
4
2
0020 Q
g
(nC)
(V)
8
40 60
10
V
DD
=50V
I
D
=80A
12
AM15758v1
C
3000
2000
1000
0
020 V
DS
(V)
(pF)
10 30
Ciss
Coss
Crss
40 50 60 70 80
4000
5000
AM15759v1
Electrical characteristics STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
8/23 DocID023737 Rev 4
Figure 14. Normalized gate threshold voltage vs
temperature Figure 15. Normalized on-resistance vs
temperature
Figure 16. Source -drain diode forward
characteristics
V
GS(th)
1
0.96
0.94
0.92
-55 -5 T
J
(°C)
(norm)
-30 70
20 45 95 120
0.98
1.02
1.04
I
D
= 250 µA
AM15746v1
R
DS(on)
1.8
1.4
0.8
0.4
-55 -5 T
J
(°C)
(norm)
-30 70
20 45 95
I
D
=40A
0.6
1
1.2
1.6
2
120
AM15760v1
V
SD
040 I
SD
(A)
(V)
20 100
60 80
0.5
0.6
0.7
0.8
T
J
=-55°C
T
J
=150°C
T
J
=25°C
0.9
1
1.1
AM15749v1
DocID023737 Rev 4 9/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Test circuits
3 Test circuits
Figure 17. Switching times test circuit for
resistive load Figure 18. Gate charge test circuit
Figure 19. Test circuit for inductive load
switching and diode recovery times Figure 20. Unclamped inductive load test c ircuit
Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform
AM01468v1
VGS
PW
VD
RG
RL
D.U.T.
2200
μF
3.3
μFVDD
AM01470v1
A
D
D.U.T.
S
B
G
25 Ω
AA
BB
RG
G
FAST
DIODE
D
S
L=100μH
μF
3.3 1000
μFVDD
AM01471v1
Vi
Pw
VD
ID
D.U.T.
L
2200
μF
3.3
μFVDD
AM01472v1
V(BR)DSS
VDD
VDD
VD
IDM
ID
AM01473v1
VDS
ton
tdon tdoff
toff
tf
tr
90%
10%
10%
0
0
90%
90%
10%
VGS
Package mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
10/23 DocID023737 Rev 4
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK
®
is an ST trademark.
Figure 23. D²PAK (TO-263) drawing
0079457_T
DocID023737 Rev 4 11/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Package mechanical data
Figure 24. D²PAK footprint
(a)
a. All dimension are in millimeters
16.90
12.20
9.75
3.50
5.08
1.60
Footprint
Package mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
12/23 DocID023737 Rev 4
Table 9. DPAK (TO-252) mechanical data
Dim. mm
Min. Typ. Max.
A 2.20 2.40
A1 0.90 1.10
A2 0.03 0.23
b 0.64 0.90
b4 5.20 5.40
c 0.45 0.60
c2 0.48 0.60
D 6.00 6.20
D1 5.10
E 6.40 6.60
E1 4.70
e2.28
e1 4.40 4.60
H 9.35 10.10
L 1.00 1.50
(L1) 2.80
L2 0.80
L4 0.60 1.00
R0.20
V2 0° 8°
DocID023737 Rev 4 13/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Package mechanical data
Figure 25. DPAK (TO-252) drawing
0068772_K
Package mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
14/23 DocID023737 Rev 4
Figure 26. DPAK footprint
(b)
b. All dimensions are in millimeters
Footprint_REV_K
DocID023737 Rev 4 15/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Package mechanical data
Table 10. TO-220FP mechanical data
Dim. mm
Min. Typ. Max.
A4.4 4.6
B2.5 2.7
D2.5 2.75
E0.45 0.7
F0.75 1
F1 1.15 1.70
F2 1.15 1.70
G4.95 5.2
G1 2.4 2.7
H10 10.4
L2 16
L3 28.6 30.6
L4 9.8 10.6
L5 2.9 3.6
L6 15.9 16.4
L7 9 9.3
Dia 3 3.2
Package mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
16/23 DocID023737 Rev 4
Figure 27. TO-220FP drawing
7012510_Rev_K_B
DocID023737 Rev 4 17/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Package mechanical data
Table 11. TO-220 type A mechanical data
Dim. mm
Min. Typ. Max.
A 4.40 4.60
b 0.61 0.88
b1 1.14 1.70
c 0.48 0.70
D 15.25 15.75
D1 1.27
E 10 10.40
e 2.40 2.70
e1 4.95 5.15
F 1.23 1.32
H1 6.20 6.60
J1 2.40 2.72
L13 14
L1 3.50 3.93
L20 16.40
L30 28.90
∅
P 3.75 3.85
Q 2.65 2.95
Package mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
18/23 DocID023737 Rev 4
Figure 28. TO-220 type A drawing
0015988_typeA_Rev_S
DocID023737 Rev 4 19/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Packaging mechanical data
5 Packaging mechanical data
Table 12. D²PAK (TO-263) tape and reel mechanical data
Tape Reel
Dim. mm Dim. mm
Min. Max. Min. Max.
A0 10.5 10.7 A 330
B0 15.7 15.9 B 1.5
D 1.5 1.6 C 12.8 13.2
D1 1.59 1.61 D 20.2
E 1.65 1.85 G 24.4 26.4
F 11.4 11.6 N 100
K0 4.8 5.0 T 30.4
P0 3.9 4.1
P1 11.9 12.1 Base qty 1000
P2 1.9 2.1 Bulk qty 1000
R50
T 0.25 0.35
W 23.7 24.3
Table 13. DPAK (TO-252) tape and reel mechanical data
Tape Reel
Dim. mm Dim. mm
Min. Max. Min. Max.
A0 6.8 7 A 330
B0 10.4 10.6 B 1.5
B1 12.1 C 12.8 13.2
D 1.5 1.6 D 20.2
D1 1.5 G 16.4 18.4
E 1.65 1.85 N 50
F 7.4 7.6 T 22.4
K0 2.55 2.75
P0 3.9 4.1 Base qty. 2500
P1 7.9 8.1 Bulk qty. 2500
Packaging mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
20/23 DocID023737 Rev 4
Figure 29. Tape
P2 1.9 2.1
R40
T 0.25 0.35
W 15.7 16.3
Table 13. DPAK (TO-252) tape and reel mechanical data (continued)
Tape Reel
Dim. mm Dim. mm
Min. Max. Min. Max.
P1
A0 D1
P0
F
W
E
D
B0
K0
T
User direction of feed
P2
10 pitches cumulative
tolerance on tape +/- 0.2 mm
User direction of feed
R
Bending radius
B1
For machine ref. only
including draft and
radii concentric around B0
AM08852v1
Top cover
tape
DocID023737 Rev 4 21/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Packaging mechanical data
Figure 30. Reel
A
D
B
Full radius G measured at hub
C
N
REEL DIMENSIONS
40mm min.
Access hole
At slot location
T
Tape slot
in core for
tape start 25 mm min.
width
AM08851v2
Revision history STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
22/23 DocID023737 Rev 4
6 Revision history
Table 14. Document revision history
Date Revision Changes
05-Oct-2012 1First release.
07-Feb-2013 2
– Inserted device in TO-220FP.
– Updated title and features on the cover page, Table 1: Device
summary, Table 2: Absolut e maximum rati ngs, Table 3: Thermal
resistance and Table 5: On/off sta tes accordingly.
– Updated Table 6: Dynamic, Table 7: Switching times, Table 8:
Source drai n diod e and Section 4: Package mechanical data.
– Added Section 5: Packaging mechanical data.
29-Apr-2013 3
– Modified: the entire typical values in Table 6, t
f
typical value
inTable 7, V
SD
and typical values for t
rr
, q
rr
, I
RRM
– Inserted:Table 4: Avalanche characteristics and Section 2.1:
Electrical characteristics (curves)
– Minor text changes
25-Nov-2013 4
– Inserted device in D
2
PAK.
– Updated title and features on the cover page, Table 1: Device
summary, Table 2: Absolut e maximum rati ngs, Table 3: Thermal
resistance and Table 5: On/off sta tes accordingly.
– Updated Table 6: Dynamic, Secti on 4: Package mechanical dat a
and Section 5: Packaging mechanical data.
DocID023737 Rev 4 23/23
STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
CCC G