SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS CK Chip type, Low Impedance, High CV Series Low Impedance Solvent Proof Chip type, low impedance temperature range up to 105 C Designed for surface mounting on high density PC board Applicable to automatic insertion machine using carrier tape Complied to the RoHS directive Item Operating temperature range Leakage current max. Capacitance tolerance Characteristics -55 ~ +105 C I = 0.01CV or 3 A whichever is greater (after 2 minutes) 20% at 120Hz, 20 C Dissipation factor max. (at 120Hz, 20 C) WV tan Low temperature characteristics (Impedance ratio at 120Hz) WV Z-25 C/Z+20 C Z-55 C/Z+20 C Load life (after application of the rated voltage for 2000 hours at 105 C) 6.3 0.24 Leakage current Capacitance change tan 10 0.19 6.3 2 3 16 0.16 25 0.14 10 2 3 35 0.12 16 2 3 50 0.12 25 2 3 63 0.10 35 2 3 80 0.10 100 0.10 50 2 3 63~100 3 4 Less than specified value Within 25% of initial value Less than 200% of specified value Shelf life (at 105 C) After 1000 hours no load test, leakage current, capacitance and tan are same as load life value. The measurement shall be performed at 20 C by the KS C IEC 60384 - 4 Resistance to soldering heat The following specifications shall be satisfied when the capacitors are restored to 20 C after exposing them at 250 C for 10 seconds. Less than specified value Leakage current Within 10% of initial value Capacitance change Less than specified value tan DRAWING 6.3 Unit : mm -Series code of CK is "K" 8 6.2) D 6.3 6.3 8 8 10 12.5 Voltage mark for 6.3V is 6 8 10, 12.5) 82 10 10) L 5.8 7.7 6.2 10 10 13.5 A B C 2.4 6.6 6.6 2.4 6.6 6.6 3.3 8.3 8.3 2.9 8.3 8.3 3.2 10.3 10.3 4.6 12.8 12.8 E 2.2 2.2 2.3 3.1 4.5 4.5 R 0.5~0.8 0.5~0.8 0.5~0.8 0.8~1.1 0.8~1.1 0.8~1.4 SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS CK series DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV F 6.3 10 16 25 35 50 10 6.3 5.8 1.0 165 15 6.3 5.8 1.0 165 22 6.3 5.8 1.0 165 6.3 7.7 0.68 280 33 6.3 5.8 0.44 230 6.3 5.8 0.44 230 6.3 5.8 0.44 230 8 6.2 6.3 6.3 5.8 0.44 230 6.3 47 5.8 0.44 230 6.3 5.8 0.44 230 6.3 6.3 6.3 5.8 0.44 230 6.3 5.8 0.44 230 6.3 7.7 0.68 280 5.8 0.44 230 6.2 0.63 300 8 10 0.34 450 8 68 0.63 300 7.7 0.34 280 5.8 0.44 230 6.3 5.8 0.44 230 8 6.2 0.38 300 8 10 0.17 450 10 8 10 0.17 450 6.3 7.7 0.34 280 6.3 100 5.8 0.44 230 6.3 5.8 0.44 230 6.3 6.3 6.3 150 5.8 0.44 230 6.3 6.3 6.3 8 10 0.17 450 8 10 0.17 450 10 10 0.18 670 7.7 0.34 280 6.3 7.7 0.34 280 8 6.2 0.26 300 8 6.2 0.26 300 8 10 0.17 450 10 0.17 450 10 8 10 0.17 450 10 10 0.09 670 7.7 0.34 280 8 6.2 0.26 300 470 8 10 0.17 450 680 8 10 0.17 450 10 1000 10 10 0.09 670 1500 10 10 0.09 670 WV 10 22 33 47 68 100 150 220 0.26 300 0.26 300 6.2 5.8 0.44 230 330 F 6.2 CHIP TYPES 6.3 8 7.7 0.34 280 5.8 0.44 230 8 220 5.8 0.44 230 8 10 0.09 670 10 0.09 670 63 6.3 5.8 6.3 7.7 8 10 8 10 10 10 10 10 12.5 13.5 12.5 13.5 10 0.15 670 80 80 120 250 250 400 400 800 800 2.8 2.1 1.0 1.0 0.8 0.8 0.6 0.6 6.3 8 8 10 12.5 12.5 12.5 7.7 10 10 10 13.5 13.5 13.5 100 60 130 130 200 500 500 500 2.4 1.3 1.3 1.2 0.8 0.8 0.8 8 10 12.5 12.5 10 10 13.5 13.5 130 200 500 500 2.0 1.5 1.0 1.0 Ripple current (mA r ms) at 105 C, 100kHz Impedance () at 20 C, 100kHz Case size D X L (mm) FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency 50Hz 120Hz 300Hz 1kHz 10kHz Coefficient 0.35 0.5 0.64 0.83 1.00 83