DVHF2800S Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES The DVHF series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range with no power derating. Unique to the DVHF series are robust and effective input and output filters which provide dramatically reduced input and output noise performance when compared to other manufacturers competing devices. Operating at a nominal fixed frequency of 450 kHz, these regulated, isolated units utilize a high speed magnetic feedback design and well controlled undervoltage lockout circuitry to eliminate slow startup problems. These converters are designed and manufactured in a facility qualified to ISO9001 and certified to MILPRF-38534 and MIL-STD-883. This product may incorporate one or more of the following U.S. patents: 5,784,266 5,790,389 5,963,438 5,999,433 6,005,780 6,084,792 6,118,673 High Reliability Very Low Output Noise Wide Input Voltage Range: 15 to 50 Volts per MIL-STD-704 Up to 20 Watts Output Power Fault Tolerant Magnetic Feedback Circuit NO Use of Optoisolators Undervoltage Lockout Indefinite Short Circuit Protection Current Limit Protection Industry Standard Pinout High Input Transient Voltage: 80 Volts for 1 sec per MIL-STD-704A Precision Projection Welded Hermetic Package High Power Density: > 37 W/in3 Custom Versions Available Additional Environmental Screening Available Meets MIL-STD-461 Revisions C, D, E and F EMC Requirements When Used With VPT's EMI Filters. Flanged and Non-flanged Versions Available. MIL-PRF-38534 Element Evaluated Components Space Applications should consider VPT's "S" Series of Radiation Tolerant Power Conversion Devices. Contact VPT for details. Figure 1 - DVHF2800S / DVHF2800SF DC-DC Converter (Exact marking may differ from that shown) DVHF2800S-2.0 http://www.vpt-inc.com Sales Information: Phone: (425) 353-3010 Fax: (425) 353-4030 E-mail: vptsales@vpt-inc.com 1 DVHF2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) Parameter 50 VDC 80 Volts 20 Watts 6 Watts Conditions Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (Un-Flanged / Flanged) DVHF281R9S Min Typ +12C -65C to +150C 270C (24 / 28) Grams DVHF283R3S Max Min Typ Max Units STATIC Continuous INPUT 4 Voltage Current Ripple Current Inhibit Pin Input 15 28 50 15 28 50 V Transient, 1 sec - - 80 - - 80 V Inhibited - 4 6 - 4 6 mA No Load - 45 65 - 45 65 mA Full Load, 20Hz to 10MHz - 20 80 - 25 80 mAp-p 0 - 1.5 0 - 1.5 V 9 11 13 9 11 13 V 12 - 14.8 12 - 14.8 V 4 Inhibit Pin Open Circuit Voltage 4 UVLO Turn On 4 UVLO Turn Off OUTPUT Voltage 11 - 14.5 11 - 14.5 V VOUT TCASE = 25C 1.87 1.9 1.93 3.267 3.3 3.333 V VOUT TCASE = -55C to +125C 1.86 1.9 1.94 3.25 3.3 3.35 V 0 - 8 0 - 10 W 3 Power Current 3 0 - 4 0 - 3 A Ripple Voltage VOUT VOUT Full Load, 20Hz to 10MHz - 10 40 - 10 40 mVp-p Line Regulation VOUT VIN = 15V to 50V - 2 20 - 2 20 mV Load Regulation VOUT No Load to Full Load mV EFFICIENCY LOAD FAULT POWER DISSIPATION Overload 4 Short Circuit 4 CAPACITIVE LOAD SWITCHING FREQUENCY ISOLATION 500 VDC MTBF (MIL-HDBK-217F) AIF @ TC = 55C - 25 75 - 20 50 57 61 - 65 71 - % - - 8 - - 8 W - - 8 - - 8 W - - 1000 - - 1000 F 350 450 500 350 450 500 kHz 100 - - 100 - - M - 427 - - 427 - kHrs - 100 250 - 160 400 mVPK DYNAMIC Load Step Output Transient VOUT 2 Load Step Recovery Line Step Output Transient 4 VOUT 2, 4 Line Step Recovery Turn On Delay Turn On Overshoot Notes: VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. DVHF2800S-2.0 - 450 800 - 350 500 Sec - 100 400 - 400 700 mVPK - 200 700 - 300 500 Sec - 10 20 - 10 20 mSec - 0 15 - 0 15 mVPK 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 2 DVHF2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) Parameter 50 VDC 80 Volts 20 Watts 6 Watts Conditions Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (Un-Flanged / Flanged) DVHF2805S Min Typ +12C -65C to +150C 270C (24 / 28) Grams DVHF285R2S Max Min Typ Max Units STATIC Continuous INPUT 4 Voltage Current Ripple Current Inhibit Pin Input 15 28 50 15 28 50 V Transient, 1 sec - - 80 - - 80 V Inhibited - 4 6 - 4 6 mA No Load - 45 65 - 45 65 mA Full Load, 20Hz to 10MHz - 30 80 - 30 80 mAp-p 0 - 1.5 0 - 1.5 V 9 11 13 9 11 13 V 12 - 14.8 12 - 14.8 V 4 Inhibit Pin Open Circuit Voltage 4 UVLO Turn On 4 UVLO Turn Off OUTPUT Voltage 11 - 14.5 11 - 14.5 V VOUT TCASE = 25C 4.95 5 5.05 5.148 5.2 5.252 V VOUT TCASE = -55C to +125C 4.925 5 5.075 5.122 5.2 5.278 V 0 - 15 0 - 15 W 3 Power Current 3 0 - 3 0 - 3 A Ripple Voltage VOUT VOUT Full Load, 20Hz to 10MHz - 15 40 - 15 40 mVp-p Line Regulation VOUT VIN = 15V to 50V - 2 20 - 2 20 mV Load Regulation VOUT No Load to Full Load mV EFFICIENCY LOAD FAULT POWER DISSIPATION Overload 4 Short Circuit 4 CAPACITIVE LOAD SWITCHING FREQUENCY ISOLATION 500 VDC MTBF (MIL-HDBK-217F) AIF @ TC = 55C - 25 50 - 25 50 72 77 - 72 77 - % - - 8 - - 8 W - - 8 - - 8 W - - 1000 - - 1000 F 350 450 500 350 450 500 kHz 100 - - 100 - - M - 427 - - 427 - kHrs - 250 600 - 250 600 mVPK DYNAMIC Load Step Output Transient VOUT 2 Load Step Recovery Line Step Output Transient 4 VOUT 2, 4 Line Step Recovery Turn On Delay Turn On Overshoot Notes: VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. DVHF2800S-2.0 - 450 600 - 450 600 Sec - 400 800 - 400 800 mVPK - 300 700 - 300 700 Sec - 10 20 - 10 20 mSec - 0 25 - 0 25 mVPK 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 3 DVHF2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) Parameter 50 VDC 80 Volts 20 Watts 6 Watts Conditions Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (Un-Flanged / Flanged) DVHF285R7S Min Typ +12C -65C to +150C 270C (24 / 28) Grams DVHF2812S Max Min Typ Max Units STATIC Continuous INPUT 4 Voltage Current Ripple Current Inhibit Pin Input 15 28 50 15 28 50 V Transient, 1 sec - - 80 - - 80 V Inhibited - 4 6 - 4 6 mA No Load - 45 65 - 45 65 mA Full Load, 20Hz to 10MHz - 30 80 - 40 80 mAp-p 0 - 1.5 0 - 1.5 V 9 11 13 9 11 13 V 12 - 14.8 12 - 14.8 V 4 Inhibit Pin Open Circuit Voltage 4 UVLO Turn On 4 UVLO Turn Off OUTPUT Voltage 11 - 14.5 11 - 14.5 V VOUT TCASE = 25C 5.643 5.7 5.757 11.88 12 12.12 V VOUT TCASE = -55C to +125C 5.615 5.7 5.786 11.82 12 12.18 V 0 - 15 0 - 20 W 3 Power Current 3 0 - 2.63 0 - 1.67 A Ripple Voltage VOUT VOUT Full Load, 20Hz to 10MHz - 15 40 - 10 40 mVp-p Line Regulation VOUT VIN = 15V to 50V - 2 20 - 2 20 mV Load Regulation VOUT No Load to Full Load mV EFFICIENCY LOAD FAULT POWER DISSIPATION Overload 4 Short Circuit 4 CAPACITIVE LOAD SWITCHING FREQUENCY ISOLATION 500 VDC MTBF (MIL-HDBK-217F) AIF @ TC = 55C - 25 50 - 10 50 72 77 - 77 84 - % - - 8 - - 8 W - - 8 - - 8 W - - 1000 - - 500 F 350 450 500 350 450 500 kHz 100 - - 100 - - M - 427 - - 427 - kHrs - 150 400 - 350 500 mVPK DYNAMIC Load Step Output Transient VOUT 2 Load Step Recovery Line Step Output Transient 4 VOUT 2, 4 Line Step Recovery Turn On Delay Turn On Overshoot Notes: VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. DVHF2800S-2.0 - 150 400 - 250 500 Sec - 250 450 - 500 900 mVPK - 300 700 - 300 500 Sec - 10 20 - 10 20 mSec - 0 25 - 0 50 mVPK 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 4 DVHF2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) Parameter 50 VDC 80 Volts 20 Watts 6 Watts Conditions Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (Un-Flanged / Flanged) DVHF2815S Min Typ +12C -65C to +150C 270C (24 / 28) Grams DVHF2818S Max Min Typ Max Units STATIC Continuous INPUT 4 Voltage Current Ripple Current Inhibit Pin Input 15 28 50 15 28 50 V Transient, 1 sec - - 80 - - 80 V Inhibited - 4 6 - 4 6 mA No Load - 45 65 - 45 65 mA Full Load, 20Hz to 10MHz - 40 80 - 40 80 mAp-p 0 - 1.5 0 - 1.5 V 9 11 13 9 11 13 V 12 - 14.8 12 - 14.8 V 4 Inhibit Pin Open Circuit Voltage 4 UVLO Turn On 4 UVLO Turn Off OUTPUT Voltage 11 - 14.5 11 - 14.5 V VOUT TCASE = 25C 14.85 15 15.15 17.82 18 18.18 V VOUT TCASE = -55C to +125C 14.775 15 15.225 17.73 18 18.27 V 0 - 20 0 - 20 W 3 Power Current 3 0 - 1.34 0 - 1.11 A Ripple Voltage VOUT VOUT Full Load, 20Hz to 10MHz - 10 40 - 10 40 mVp-p Line Regulation VOUT VIN = 15V to 50V - 2 20 - 2 20 mV Load Regulation VOUT No Load to Full Load mV EFFICIENCY LOAD FAULT POWER DISSIPATION Overload 4 Short Circuit 4 CAPACITIVE LOAD SWITCHING FREQUENCY ISOLATION 500 VDC MTBF (MIL-HDBK-217F) AIF @ TC = 55C - 10 50 - 10 50 78 85 - 78 84 - % - - 8 - - 8 W - - 8 - - 8 W - - 500 - - 500 F 350 450 500 350 450 500 kHz 100 - - 100 - - M - 427 - - 427 - kHrs - 350 500 - 500 700 mVPK DYNAMIC Load Step Output Transient VOUT 2 Load Step Recovery Line Step Output Transient 4 VOUT 2, 4 Line Step Recovery Turn On Delay Turn On Overshoot Notes: VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. DVHF2800S-2.0 - 250 500 - 200 500 Sec - 500 900 - 800 1200 mVPK - 300 500 - 500 700 Sec - 10 20 - 10 20 mSec - 0 50 - 0 50 mVPK 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 5 DVHF2800S Series SPECIFICATIONS (TCASE = -55C to +125C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) Output Power1 Power Dissipation (Full Load, TCASE = +125C) Parameter 50 VDC 80 Volts 20 Watts 6 Watts Conditions Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight (Maximum) (Un-Flanged / Flanged) DVHF2828S Min Typ Max +12C -65C to +150C 270C (24 / 28) Grams Units STATIC Continuous INPUT 4 Voltage Current Ripple Current Inhibit Pin Input 15 28 50 V Transient, 1 sec - - 80 V Inhibited - 4 6 mA No Load - 45 65 mA Full Load, 20Hz to 10MHz - 40 100 mAp-p 0 - 1.5 V 9 11 13 V 12 - 14.8 V 4 Inhibit Pin Open Circuit Voltage 4 UVLO Turn On 4 UVLO Turn Off OUTPUT Voltage 11 - 14.5 V VOUT TCASE = 25C 27.70 28.00 28.30 V VOUT TCASE = -55C to +125C 27.25 28.00 28.75 V 0 - 20 W 3 Power Current 3 0 - 0.714 A Ripple Voltage VOUT VOUT Full Load, 20Hz to 10MHz - 45 120 mVp-p Line Regulation VOUT VIN = 15V to 50V - 45 150 mV Load Regulation VOUT No Load to Full Load mV EFFICIENCY LOAD FAULT POWER DISSIPATION Overload 4 Short Circuit 4 CAPACITIVE LOAD SWITCHING FREQUENCY ISOLATION 500 VDC MTBF (MIL-HDBK-217F) AIF @ TC = 55C - 25 150 79 85 - % - - 8 W - - 8 W - - 500 F 350 450 500 kHz 100 - - M - 427 - kHrs - 630 900 mVPK DYNAMIC Load Step Output Transient VOUT 2 Load Step Recovery Line Step Output Transient 4 VOUT 2, 4 Line Step Recovery Turn On Delay Turn On Overshoot Notes: VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V 1. Dependant on output voltage. 3. Derate linearly to 0 at 135C. DVHF2800S-2.0 - 250 400 Sec - 900 1300 mVPK - 400 700 Sec - 10 20 mSec - 0 50 mVPK 2. Time for output voltage to settle within 1% of its nominal value. 4. Verified by qualification testing. 6 DVHF2800S Series BLOCK DIAGRAM PIN 8 T1 D1 PIN 4 28V IN +V OUT L1 C2 C1 Rs2 OUT COM IN COM PIN 3 PIN 7 Q1 MAGNETIC FEEDBACK UNDER VOLTAGE SHUTDOWN VOLTAGE AND CURRENT AMPLIFIERS Rs1 PRIMARY HOUSEKEEPING SUPPLY PWM CONTROL SECONDARY HOUSEKEEPING SUPPLY INH PIN 1 Note: Not applicable to DVHF2828S. Figure 2 CONNECTION DIAGRAM 8 4 (PIN 2 of DVHF2828S) 28V IN 28 Vdc + - +V OUT LOAD 1 INH OUT COM 3 (PIN 4 of DVHF2828S) 7 IN COM Figure 3 DVHF2800S-2.0 7 DVHF2800S Series INHIBIT DRIVE CONNECTION DIAGRAMS 28V IN 8 28V IN 8 10K INH 1 10K OPTOISOLATOR BIAS OPTIONAL CAPACITOR INH 1 BIAS OPTIONAL CAPACITOR 12V IN COM 7 12V IN COM 7 Figure 4 - Internal Inhibit Circuit and Recommended Drive Figure 5 - Isolated Inhibit Drive (Shown with optional capacitor for turn-on delay) (Shown with optional capacitor for turn-on delay) EMI FILTER HOOKUP DIAGRAM DVMH28 EMI FILTER 1 28V IN 28V OUT DVHF2800S DC-DC CONVERTER 2 8 28 Vdc 28V IN +V OUT LOAD 1 + - INH 5 4 IN COM OUT COM 3 (PIN 4 of DVHF2828S) 7 OUT COM 3 4 (PIN 2 of DVHF2828S) IN COM CASE 6 Figure 6 - Converter with EMI Filter DVHF2800S-2.0 8 DVHF2800S Series EFFICIENCY PERFORMANCE CURVES (TCASE = 25C, Full Load, Unless Otherwise Specified) 65 75 60 70 55 50 60 55 40 50 2 4 Output Power (W) 6 VIN = 40V 65 45 0 8 0 2 4 6 Output Power (W) 8 Figure 7 - DVHF281R9S Figure 8 - DVHF283R3S Efficiency (%) vs. Output Power (W) Efficiency (%) vs. Output Power (W) 80 80 75 75 Efficiency (%) Efficiency (%) VIN = 28V Efficiency (%) Efficiency (%) VIN = 16V 70 65 60 10 70 65 60 55 55 0 5 10 Output Pow er (W) 15 0 5 10 Output Pow er (W) Figure 9 - DVHF2805S / DVHF285R2S Figure 10 - DVHF285R7S Efficiency (%) vs. Output Power (W) Efficiency (%) vs. Output Power (W) DVHF2800S-2.0 15 9 DVHF2800S Series EFFICIENCY PERFORMANCE CURVES (TCASE = 25C, Full Load, Unless Otherwise Specified) VIN = 28V 85 90 80 85 Efficiency (%) Efficiency (%) VIN = 16V 75 70 65 80 75 70 60 65 0 5 10 Output Pow er (W) 15 20 0 5 10 Output Pow er (W) 15 Figure 11 - DVHF2812S Figure 12 - DVHF2815S Efficiency (%) vs. Output Power (W) Efficiency (%) vs. Output Power (W) 90 90 85 85 Efficiency (%) Efficiency (%) VIN = 40V 80 75 80 75 70 70 65 65 0 5 10 Output Pow er (W) 15 20 0 5 10 15 Output Power (W) Figure 13 - DVHF2818S Figure 14 - DVHF2828S Efficiency (%) vs. Output Power (W) Efficiency (%) vs. Output Power (W) DVHF2800S-2.0 20 20 10 DVHF2800S Series EMI PERFORMANCE CURVES (TCASE = 25C, VIN = +28V 5%, Full Load, Unless Otherwise Specified) Figure 15 - DVHF2800S without EMI Filter Figure 16 - DVHF2800S with EMI Filter DVHF2800S-2.0 11 DVHF2800S Series PACKAGE SPECIFICATIONS (NON-FLANGED) All Outputs Except DVHF2828S DVHF2828S Pin Function Pin Function Pin Function Pin Function 1 2 3 4 INHIBIT N/C OUT COM +V OUT 5 6 7 8 N/C CASE IN COM 28V IN 1 2 3 4 INHIBIT +V OUT * OUT COM 5 6 7 8 N/C CASE IN COM 28V IN *Pin 3 of DVHF2828S provides a +14V output referenced to OUT COM. Figure 17 - Non-Flanged Package and Pinout DVHF2800S-2.0 12 DVHF2800S Series PACKAGE SPECIFICATIONS (FLANGED) All Outputs Except DVHF2828S DVHF2828S Pin Function Pin Function Pin Function Pin Function 1 2 3 4 INHIBIT N/C OUT COM +V OUT 5 6 7 8 N/C CASE IN COM 28V IN 1 2 3 4 INHIBIT +V OUT * OUT COM 5 6 7 8 N/C CASE IN COM 28V IN *Pin 3 of DVHF2828S provides a +14V output referenced to OUT COM. Figure 18 - Flanged Package and Pinout DVHF2800S-2.0 13 DVHF2800S Series PACKAGE PIN DESCRIPTION All Outputs Except DVHF2828S: Pin Function Description 1 INHIBIT Logic Low = Disabled Output. Connecting the inhibit pin to input common causes converter shutdown. Logic High = Enabled Output. Unconnected or open collector TTL. 2 N/C No Connection 3 OUT COM Output Common Connection 4 +V OUT Positive Output Voltage Connection 5 N/C No Connection 6 CASE Case Connection 7 IN COM Input Common Connection 8 28V IN Positive Input Voltage Connection Function Description 1 INHIBIT Logic Low = Disabled Output. Connecting the inhibit pin to input common causes converter shutdown. Logic High = Enabled Output. Unconnected or open collector TTL. 2 +V OUT Positive Output Voltage Connection 3 * Provides +14V output referenced to OUT COM. 4 OUT COM Output Common Connection 5 N/C No Connection 6 CASE Case Connection 7 IN COM Input Common Connection 8 28V IN Positive Input Voltage Connection DVHF2828S: Pin DVHF2800S-2.0 14 DVHF2800S Series ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534) Test Non-Destructive Bond Pull Internal Visual Temperature Cycling Constant Acceleration PIND Pre Burn-In Electrical Burn-In Final Electrical No Suffix (Standard) Non-QML /ES (Extended) Non-QML /H (Class H) /K (Class K) TM2023 TM2010, TM2017, TM2032 (MIL-STD-750, TM2072, TM2073) MIL-STD-883 Test Method, Condition TM1010, Condition C -65C to 150C, Ambient TM1010, Condition B -55C to 125C, Ambient TM2001, 3000g, Y1 Direction TM2001, 500g, Y1 Direction Notes: TM2020, Condition A 25C TM1015, 320 hrs, 125C, Case Typ TM1015, 160 hrs, 125C, Case Typ 96 hrs, 125C, Case Typ 24 hrs, 125C, Case Typ MIL-PRF-38534, Group A Subgroups 1-6 -55C, 25C, 125C MIL-PRF-38534, Group A Subgroups 1 and 4 25C Hermeticity (Seal) TM1014, Fine Leak, Condition A2 TM1014, Gross Leak, Condition C Gross Leak, Dip (1 x 10-3) Radiography TM2012 External Visual TM2009 Contact Sales for more information concerning additional environmental screening and testing options desired. VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless specifically forbidden by customer contract. 100% R&R testing with all test data included in product shipment. Not required per MIL-PRF-38534. Test is performed for additional product quality assurance. Non-QML products may not meet all requirements of MIL-PRF-38534. Note intentionally not used. PIND test Certificate of Compliance included in product shipment. Radiographic test Certificate of Compliance and film(s) or data CD included in product shipment. DVHF2800S-2.0 15 DVHF2800S Series ORDERING INFORMATION DVHF 28 05 S F /H 1 2 3 4 5 6 - XXX 7 (1) (2) (3) (4) Product Series Nominal Input Voltage Output Voltage Number of Outputs DVHF 28 1. 1R9 3R3 05 5R2 5R7 12 15 18 28 1.9 Volts 3.3 Volts 5 Volts 5.2 Volts 5.7 Volts 12 Volts 15 Volts 18 Volts 28 Volts S (5) (6) (7) Package Option Screening Code1 Additional Screening Code None F Notes: 28 Volts Non-Flanged Flanged None /ES /H /K Standard Extended Class H Class K Single Contact Sales VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless specifically forbidden by customer contract. Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional environmental screening and testing, different input voltage, output voltage, power requirement, source inspection, and/or special element evaluation for space or other higher quality applications. DVHF2800S-2.0 16 DVHF2800S Series SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS Standard Microcircuit Drawing (SMD) DVHF2800S Series Similar Part Number Standard Microcircuit Drawing (SMD) DVHF2800S Series Similar Part Number 5962-0324306HXC 5962-0324306HXA 5962-0324306HYC 5962-0324306HYA 5962-0324306KXC 5962-0324306KXA 5962-0324306KYC 5962-0324306KYA 5962-0324301HXC 5962-0324301HXA 5962-0324301HYC 5962-0324301HYA 5962-0324301KXC 5962-0324301KXA 5962-0324301KYC 5962-0324301KYA 5962-0324302HXC 5962-0324302HXA 5962-0324302HYC 5962-0324302HYA 5962-0324302KXC 5962-0324302KXA 5962-0324302KYC 5962-0324302KYA 5962-0324303HXC 5962-0324303HXA 5962-0324303HYC 5962-0324303HYA 5962-0324303KXC 5962-0324303KXA 5962-0324303KYC 5962-0324303KYA 5962-0324308HXC 5962-0324308HXA 5962-0324308HYC 5962-0324308HYA 5962-0324308KXC 5962-0324308KXA 5962-0324308KYC 5962-0324308KYA DVHF281R9S/H DVHF281R9S/H-E DVHF281R9SF/H DVHF281R9SF/H-E DVHF281R9S/K DVHF281R9S/K-E DVHF281R9SF/K DVHF281R9SF/K-E DVHF283R3S/H DVHF283R3S/H-E DVHF283R3SF/H DVHF283R3SF/H-E DVHF283R3S/K DVHF283R3S/K-E DVHF283R3SF/K DVHF283R3SF/K-E DVHF2805S/H DVHF2805S/H-E DVHF2805SF/H DVHF2805SF/H-E DVHF2805S/K DVHF2805S/K-E DVHF2805SF/K DVHF2805SF/K-E DVHF285R2S/H DVHF285R2S/H-E DVHF285R2SF/H DVHF285R2SF/H-E DVHF285R2S/K DVHF285R2S/K-E DVHF285R2SF/K DVHF285R2SF/K-E DVHF285R7S/H DVHF285R7S/H-E DVHF285R7SF/H DVHF285R7SF/H-E DVHF285R7S/K DVHF285R7S/K-E DVHF285R7SF/K DVHF285R7SF/K-E 5962-0324304HXC 5962-0324304HXA 5962-0324304HYC 5962-0324304HYA 5962-0324304KXC 5962-0324304KXA 5962-0324304KYC 5962-0324304KYA 5962-0324305HXC 5962-0324305HXA 5962-0324305HYC 5962-0324305HYA 5962-0324305KXC 5962-0324305KXA 5962-0324305KYC 5962-0324305KYA 5962-0324309HXC 5962-0324309HXA 5962-0324309HYC 5962-0324309HYA 5962-0324309KXC 5962-0324309KXA 5962-0324309KYC 5962-0324309KYA 5962-0324307HXC 5962-0324307HXA 5962-0324307HYC 5962-0324307HYA 5962-0324307KXC 5962-0324307KXA 5962-0324307KYC 5962-0324307KYA DVHF2812S/H DVHF2812S/H-E DVHF2812SF/H DVHF2812SF/H-E DVHF2812S/K DVHF2812S/K-E DVHF2812SF/K DVHF2812SF/K-E DVHF2815S/H DVHF2815S/H-E DVHF2815SF/H DVHF2815SF/H-E DVHF2815S/K DVHF2815S/K-E DVHF2815SF/K DVHF2815SF/K-E DVHF2818S/H DVHF2818S/H-E DVHF2818SF/H DVHF2818SF/H-E DVHF2818S/K DVHF2818S/K-E DVHF2818SF/K DVHF2818SF/K-E DVHF2828S/H DVHF2828S/H-E DVHF2828SF/H DVHF2828SF/H-E DVHF2828S/K DVHF2828S/K-E DVHF2828SF/K DVHF2828SF/K-E Do not use the DVHF2800S Series similar part number for SMD product acquisition. It is listed for reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD's can be downloaded from the DLA Land and Maritime (Previously known as DSCC) website at http://www.dscc.dla.mil/programs/smcr/. The SMD number listed above is for standard gold plated lead finish and no RHA (Radiation Hardness Assurance) level. Please reference the SMD for other screening levels, lead finishes, and radiation levels. All SMD products are marked with a "Q" on the cover as specified by the QML certification mark requirement of MIL-PRF-38534. DVHF2800S-2.0 17 DVHF2800S Series CONTACT INFORMATION To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales Department at: Phone: Fax: E-mail: (425) 353-3010 (425) 353-4030 vptsales@vpt-inc.com All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors or omissions. The products or specifications contained herein are subject to change without notice. DVHF2800S-2.0 18