FMS CONNECTOR 1.0mm Emboss Tape Connectors for FFC pitch Features ------------------------ * Compact This connector measures 1.0mm in pitch, 2.8mm in mounting height, and 6.3mm in width. * Double-sided contact This connector has highly resilient phosphor bronze contacts, each of which has two independent mating spring members that ensure continuity even when subjected to severe vibration. Because each of the contacts simultaneously mates with both sides of the FFC, the engineer has greater freedom in designing his circuitry. * Simple snap-in action The FFC is securely connected by simply inserting its leads into the connector. * SMT configuration The FMS series connectors are designed for surface mounting (SMT) and to meet the demand for high-density packaging. They are miniature connectors with a height of only 2.8mm, and can be supplied packaged in embossed tape to facilitate automatic mounting. Its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products. * Solder tabs This connector also features reinforcing solder tabs to prevent lifting of the connector during mating and unmating. Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/20m max. After environmental testing/30m max. * Insulation resistance: 800M min. * Withstanding voltage: 500V AC/minute * Applicable FFC: Conductor pitch/1.0mm Conductor width/0.7mm Mating part thickness/0.300.05mm <Note>FFC to be actually used should be checked for applicability. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 1 Recognized E60389 Certified LR20812 1 FMS CONNECTOR Connector --------------------------------------------------------------- Circuits B A 6.3 5.3 1.5 0.4 2.8 1.0 Dimensions (mm) Model No. A B Q'ty / reel 3 03FMS-1.0SP-TF 2.0 5.0 2,500 4 04FMS-1.0SP-TF 3.0 6.0 2,500 5 05FMS-1.0SP-TF 4.0 7.0 2,500 6 06FMS-1.0SP-TF 5.0 8.0 2,500 8 08FMS-1.0SP-TF 7.0 10.0 2,500 10 10FMS-1.0SP-TF 9.0 12.0 2,000 11 11FMS-1.0SP-TF 10.0 13.0 2,000 12 12FMS-1.0SP-TF 11.0 14.0 2,000 14 14FMS-1.0SP-TF 13.0 16.0 2,000 Material and Finish Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Housing: PPS, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed tape. Lead section dimensions of FFC--------------------------------------------- 1.0x(N+1)0.12 1.00.15 1.0x(N-1)0.1 1.00.1 1.00.15 0.30.05 Conductor 10.0 3.0min. 0.70.1 Reinforcing layer Base layer Film cover layer Note: N --- Number of circuits PC board layout (viewed from component side) and Assembly layout ------------------ 0.60.05 6.3 5.3 1.00.05 2.8 4.00.1 0.750.1 2.50.1 0.80.1 FFC Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 2