A Business Partner of Renesas Electronics Corporation. Preliminary PH5503A2NA1 Data Sheet R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Ambient Illuminance Sensor DESCRIPTION ED The PH5503A2NA1 is an ambient illuminance sensor with a photo diode and current amplifier. This product has spectral characteristics close to human eye sensitivity and outputs light current proportional to the ambient brightness. The PH5502B2NA1-E4 can be used to improve the performance and reduce the power consumption of digital equipment such as FPD-TV sets and mobile phones, by enabling automatic brightness control and automatic switching on and off of lighting systems. FEATURES APPLICATIONS SC O FPD TV sets, displays Mobile phones, smartphones Notebook PCs, tablet PCs DSCs, DVCs FA equipment Lighting systems, etc. DI * * * * * * NT IN U * Small and thin SON package 2.55 x 1.56 x 0.55 mm * Spectral characteristics close to human eye sensitivity Peak sensitivity wavelength 555 nm TYP. * Output characteristics proportional to illuminance * Output light current 60 A TYP.@100 lx (Fluorescent light) * Reduced variation of output current among light sources * Low voltage operation VCC = 1.8 to 5.5 V * Pb-free R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Page 1 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 Chapter Title PACKAGE DIMENSIONS (UNIT: mm) TOP VIEW 2.550.2 6 2 5 3 4 IN U 0.2 ED 1 0.5 0.22 1.560.15 0.2 2.25 Remark Pin 1 is distinguishable by the shape of the lead frame. NT 0.55 SIDE VIEW BOTTOM VIEW SC O (0.25) Remark ( ) indicates nominal dimensions. Terminal OUT GND VCC NC NC NC DI Pin No. 1 2 3 4 5 6 Remark 1. Connect all the NC terminals to GND or VCC. 2. The bypass capacitor between VCC and GND is to be mounted within 20 mm of the package body. R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Page 2 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 Chapter Title BLOCK DIAGRAM VCC Light Source ED OUT IN U GND MARKING EXAMPLE (Bottom View) Assembly code NT 1 pin 03 SC O Product code ORDERING INFORMATION Part Number PH5503A2NA1-E4 Packing Style Embossed Tape 3 000 pcs/reel DI PH5503A2NA1 Order Number R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Page 3 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 Chapter Title ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Note: Symbol VCC IO PD Topt Tstg Ratings 6 5 135 -30 to +85 -40 to +100 Unit V mA mW C C *1. Mounted on glass epoxy board (18 mm x 13 mm x t0.8 mm) RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage Symbol VCC MIN. 1.8 TYP. 3.0 MIN. - - - 48 - TYP. 68 555 - 60 1 MAX. - - 0.1 72 - Unit A nm A A Multiple 2.6 - - - - 2.9 - V 50 tr 80 tf 160 td 4 ts *1 Measured under load resistance conditions of an output current unsaturated *2 Fluorescent light *3 Saturation output voltage measurement method: - - - - s s s s Sensitivity Ratio of Fluorescent/Incandescent Saturation Output Voltage *3 Switching Rise Time Time *4 Fall Time Delay Time Storage Time - Conditions EV = 100 lx *2 - EV = 0 lx EV = 100 lx *2 EV = 100 lx *2 EV = 100 lx, RL = 150 k *5 RL = 5 k VO SC O Note: Symbol ICC p IO0 IO1 NT Parameter Supply Current *1 Peak Sensitivity Wavelength Light Current *1 Unit V IN U ELECTRO-OPTICAL CHARACTERISTICS (TA = 25C, VCC = 3.0 V, unless otherwise specified) MAX. 5.5 ED Parameter Supply Voltage Light Current Power Dissipation *1 Operating Temperature Storage Temperature VCC VCC Light Source PH5503A OUT RL DI GND VCC VO Illuminance (lx) R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Page 4 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 Chapter Title *4 Switching Time Pulse input VCC VCC OUT PH5503A ED RL GND IN U Input 90% Output td 10% ts tr tf DI SC O NT *5 White LED R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Page 5 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 Chapter Title TYPICAL CHARACTERISTICS (TA = 25C, VCC = 3.0 V, unless otherwise specified) SPECTRAL SENSITIVITY CHARACTERISTICS 1.1 LIGHT SOURCE SENSITIVITY VARIATION 1 0.8 Incandescent light Ratio 0.7 0.6 Halogen light 0.5 0.4 Krypton light 0.3 0.2 Wavelength (nm) 1.2 0.5 1 1.5 2 1.2 DIRECTIONAL CHARACTERISTICS 2 1 1 0.8 Ratio NT 0.8 Ratio 0 Ratio DIRECTIONAL CHARACTERISTICS 1 0.6 1 pin 0.4 - 0.2 -60 -30 + 0 30 0.6 1 pin 0.4 - 0.2 60 SC O 0 -90 White LED IN U 0.1 0 300 400 500 600 700 800 900 1 000 1 100 1 200 ED Fluorescent light 0.9 90 Angle (deg.) 0 -90 -60 + -30 0 30 60 90 Angle (deg.) DI Remark The graphs indicate nominal characteristics. R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Page 6 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 LIGHT CURRENT VS. ILLUMINANCE b 0.1 c 100 0.01 10 1 Load between OUT-GND a: No load b: 1 k c: 10 k 10 100 1 000 0.001 -40 10 000 -20 20 40 60 80 100 VCC DEPENDENCY OF LIGHT CURRENT AT 100 lx (NORMALIZED AT VCC = 3 V) IN U TEMPERATURE DEPENDENCY OF LIGHT CURRENT AT 100 lx (NORMALIZED AT 25C) 1.4 1.4 1.2 1.2 1 1 Ratio 0.8 0.6 0.8 0.6 0.4 0.4 NT Ratio 0 Temperature (C) Illuminance (lx) 0.2 0.2 0 -40 ED IO1 (A) 1 000 1 1 a TEMPERATURE DEPENDENCY OF LIGHT CURRENT AT 0 lx IO0 (A) 10 000 Chapter Title -20 0 20 40 60 80 100 Temperature (C) 0 2 2.5 3 3.5 4 4.5 5 5.5 6 VCC (V) DI SC O Remark The graphs indicate nominal characteristics. R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Page 7 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 Chapter Title RECOMMENDED OPTICAL LAYOUT (UNIT: mm) 1.275 0.78 Offset 0.06 It is recommended to position the sensor so that light hits a circular area (shown by the dotted line) with a radius of 1.5 to 2 mm (diameter of 3 to 4 mm) from the center of the package. 1 pin ED Light detecting area (0.24 x 0.24 mm) 0.78 1.275 DI SC O NT IN U Recommended area for light to hit (1.5 to 2 mm radius) R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Page 8 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 Chapter Title ED 3.50.05 4.00.1 0.2 0.05 2.9 4.0 0.1 2.00.1 1.5 +0.1 -0 8.00.2 Outline and Dimensions (Tape) 1.750.1 TAPING SPECIFICATIONS (UNIT: mm) IN U 1.050.05 1.95 0.780.05 0.780.05 Tape Direction Direction of feed Carrier tape Perforation Product Pin 1 NT Product Cover tape SC O Outline and Dimensions (Reel) 1 DI C R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 2 D B A E W Symbol Dimensions (mm) Symbol Dimensions (mm) A 180 +0 -1.5 C 130.2 B 60 +1 -0 D 2.00.5 9.0 +1 -0 E 21.00.8 1 90 2 120 W Page 9 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 Chapter Title 0.5 0.5 ED 0.24 0.55 IN U 1.85 0.22 0.22 0.5 0.5 0.24 0.22 0.22 RECOMMENDED MOUNT PAD DIMENSIONS (Unit: mm) DI SC O NT Remark All dimensions in this figure must be evaluated before use. R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 Page 10 of 11 A Business Partner of Renesas Electronics Corporation. PH5503A2NA1 Chapter Title NOTES ON HANDLING 1. Recommended reflow soldering conditions (including infrared reflow, convection reflow, and infrared + convection reflow) ED (1) This product is dry-packed with desiccant in order to avoid moisture absorption. (2) After breaking the seal, reflow soldering must be done within 168 hours under the recommended temperature profile shown below. (3) If more than 168 hours have passed after breaking the seal, the baking process must be done by using a tape and reel. Baking conditions: Once, with tape and reel, 605C, 10 to 24 hours After the baking process, this product must be stored under conditions of 30C or below, 70% RH or below, and reflow soldering must be done within 168 hours. < Storage conditions after breaking seal > * Storage conditions * Maximum storage period after breaking seal IN U : 30C or below, 70% RH or below : 168 hours (Second reflow soldering must be completed within 168 hours.) < Reflow soldering conditions > * Peak reflow temperature : 260C or below (Package surface temperature) * Maximum number of reflows :2 * No repair by hand soldering * Maximum chlorine content of rosin flux (percentage mass) : 0.2% or less NT Recommended Temperature Profile of Reflow Peak Temperature 260C MAX. 255C Ramp-down rate 6C/s MAX. 220C 200C 150C DI Package Surface Temperature SC O Ramp-up rate 3C/s MAX. R08DS0055EJ0100 Rev.1.00 Dec 13, 2011 60 to 120 s 30 s or less 60 s or less Time 8 min. MAX. Page 11 of 11 Revision History PH5503A2NA1 Data Sheet Rev. Date Page 1.00 Dec 13, 2011 - Description Summary DI SC O NT IN U ED First edition issued All trademarks and registered trademarks are the property of their respective owners. C-1 1. Notice All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for use of these circuits, software, or information. 5. ED the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. IN U The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. NT 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DI SC O (Note 1)