TinkerKit Micro Servo Module Overview The Micro Servo Module is a high quality micro servo with the standard TinkerKit 3pin connector to be plugged in the Sensor Shield. The best choice to add Robotics & Mechatronics to your project. Servos are composed of an electric motor mechanically linked to a potentiometer. Arduino controls the Servo using the Servo Library. The electronics inside the servo translate the width of the pulse into a position. When the servo is commanded to rotate, the motor is powered until the potentiometer reaches the value corresponding to the commanded position. Module Description: Modulation Analog Torque 5V (1.00 kg-cm) Speed 5V 0.12 sec/60 Weight 9g Dimensions L 22.2mm / W 11.6mm / H 21.5mm Rotation Angle 180 Connectore Type TinkerKit Reference Servo Library