SPECIFICATION SHEET SS5A7111 CABLE, ELECTRIC, RADIATION-CROSSLINKED, EXTRUDED, MODIFIED, FLUOROPOLYMER-INSULATED, ONE CONDUCTOR, SHIELDED, JACKETED, LIGHTWEIGHT 34M 19a ay 1 150C Revision A The complete requirements for procuring the cable described herein shall consist of this document and the issue in effect of Raychem Specification 55A. JACKET - RADIATION-CROSSLINKEDS, MODIFIEG ETFE COMPONENT WIRE - 55A0111 SHIELD - TIN-COATED COPPER CONDUCTOR SHIELD . . MAXIMUM NUMBER SIZE SIZE ins WEIGHT (AWG ) (AWG ) MINIMUM NOMINAL NOMINAL MAX IMUM (1b/1000 ft) CABLE RATINGS AND ADDITIONAL REQUIREMENTS LOW TEMPERATURE-COLD BEND: -65 * 2C for 4 hours SHIELD COVERAGE: 85% (minimum) THERMAL SHOCK: 300 + 3C for 6 hours VOLTAGE WITHSTAND TEST: (After Accelerated Aging, Immersion, Life Cycle, Low Temperature-Cold Bend, and Thermal Shock) 1000 voits, 60 Hz, 1 minute TEMPERATURE RATING: 150C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) ACCELERATED AGING: 300 + 3C for 7 hours BLOCKING: 200 3C for 6 hours JIELECTRIC WITHSTAND: 1500 volts, 60 Hz FLAMMABILITY: Procedure 1, 3 seconds (maximum); 3 in. (maximum) ; no flaming of facial tissue JACKET COLOR: White preferred JACKET ELONGATION AND TENSILE STRENGTH: Elongation, 50% (minimum) Tensile Strength, 5000 psi (minimum) JACKET FLAWS: Spark Test, 1000 volts, 60 Hz (rms), 100% test Impulse Dielectric Test, 6.0 kV (peak), 100% test LIFE CYCLE: 200 + 3C for 168 hours NOTE: Nominal values are for information only. Nominal values are not requirements. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. PART NUMBER: The *" in the part numbers above shall be replaced by color code designators in accordance with MIL-STO-681 with a dash separating the component wire color from the jacket color. Example: AWG 20, white component wire, white jacket: 55A1111-20-9-9, Conetitution Drive, Mealo Park. Caltornss 24025-1168 361 3303 TWX 910 373 1728 38 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.