WPZCONNECTOR Sealed connectors/Board-to-wire Features Low insertion force, high contact reliability Gold plating is used for surface finish of contact part of a terminal so that low insertion force and high contact reliability are realized. Lock protection structure This connector has the lock protection structure that prevents serious deformation of lock and pinching wires. When mating connector, or assembling wire harness with header, it prevents breakage of lock. Sealed Mat seal is adopted for improving the workability of harness assembling. This is a multi-circuit sealed connector that achieves low profile and miniaturization. Specifications Current rating: Signal/3A AC, DC (0.5mm2, Single circuit) Power/7A AC, DC (1.25mm2, Single circuit) Voltage rating: 200V AC, DC Temperature range: -40C to +125C (including temperature rise in applying electrical current) Contact resistance: Initial value/5m max. After environmental testing/10m max. Insulation resistance: 100M min. Withstanding voltage: 1,000V AC/minute Applicable wire: Signal/0.3mm2 to 0.5mm2 Power/0.75mm2 to 1.25mm2 Compliant with ELV/RoHS. Contact JST for details. 1 WPZ CONNECTOR Female terminal Applicable wire range 14.2 6.5 Terminal Model No. S M Conductor (mm2) Insulation O.D. (mm) Q'ty/reel SWPZ-A031GG-M025 0.3 to 0.5 1.4 to 1.8 8,000 SWPZ-A041GG-M025 0.75 to 1.25 1.8 to 2.2 6,000 Material and Finish Copper alloy, nickel-undercoated, Contact area; gold-plated Barrel area; tin-plated (reflow treatment) 7.7 Female housing 51.8 Circuits Model No. Q'ty/box 36 WPZFBC-36-KKA 192 19.2 Material Housing: PBT, black Connector seal: Silicon, brown Seal cover: PBT, black Wire seal: Silicon, brown 2.8x2=5.6 25.9 2.2x15=33 8.3 Retainer Circuits Model No. Q'ty/box 36 WPZT-36-P 150 Material PBT, light purple 5.6 2.8 45 Wire cover Model No. Q'ty/box WPZC-36-WV 100 Material 45 16.2 PP, white 17.5 50.8 2 10 21.2 WPZ CONNECTOR Dummy plug Model No. Q'ty/box WPZD-P 3,000 Material PBT, light purple 1.95 3.2 13.5 Header Circuits Model No. Q'ty/box 36 S36B-WPZK-A 192 48.4 6.7 26.2 Material and Finish Pin: Brass, nickel-undercoated, Contact area; gold-plated Solder tail; tin/copper plated Housing: PBT, black 2.2x15=33 2.8x2=5.6 17 15 13.5 3 PC board layout, Assembly layout (39.1) (19.5) 1.20.1 2.2x15=330.1 2.8x2=5.60.1 (23.1) (6.2) 0.30.05 3.50.1 30.05 51 38.60.1 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as guideline. Contact JST for details. Crimping machine, Applicator Strip terminal SWPZ-A031GG-M025 SWPZ-A041GG-M025 Crimping machine AP-K2N Crimp applicator MKS-L Dies Crimp applicator with dies MK/SWPZ-A031-025 APLMK SWPZ-A031-025 MK/SWPZ-A041-025 APLMK SWPZ-A041-025 Note: When crimping operation is conducted using an applicator and die set other than the above, JST cannot guarantee the performance of the terminal. 3