TCMT1100 Series, TCMT4100 Series Vishay Semiconductors Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package FEATURES * Low profile package (half pitch) * AC isolation test voltage 3750 VRMS * Low coupling capacitance of typical 0.3 pF * Current transfer ratio (CTR) selected into groups * Low temperature coefficient of CTR C E 9 * Wide ambient temperature range * Compliant to RoHS directive accordance to WEEE 2002/96EC 1 2 A C 4 PIN 8 2002/95/EC and in APPLICATIONS * Programmable logic controllers 16 PIN * Modems 16467-1 * Answering machines C * General applications DESCRIPTION The TCMT1100 series consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4 pin (single channel) up to 16 pin (quad channel) package. AGENCY APPROVALS The elements are mounted on one leadframe providing a fixed distance between input and output for highest safety requirements. * DIN EN 60747-5-5 (VDE 0884) * UL1577, file no. E76222 system code M, double protection * C-UL CSA 22.2 bulletin 5A, double protection ORDER INFORMATION PART TCMT1100 REMARKS CTR 50 % to 600 %, SOP-4 TCMT1102 CTR 63 % to 125 %, SOP-4 TCMT1103 CTR 100 % to 200 %, SOP-4 TCMT1104 CTR 160 % to 320 %, SOP-4 TCMT1105 CTR 50 % to 150 %, SOP-4 TCMT1106 CTR 100 % to 300 %, SOP-4 TCMT1107 CTR 80 % to 160 %, SOP-4 TCMT1108 CTR 130 % to 260 %, SOP-4 TCMT1109 CTR 200 % to 400 %, SOP-4 TCMT4100 CTR 50 % to 600 %, quad channel, SOP-16 TCMT4106 CTR 100 % to 300 %, quad channel, SOP-16 Document Number: 83510 Rev. 2.2, 10-Aug-09 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 900 TCMT1100 Series, TCMT4100 Series Optocoupler, Phototransistor Output, Vishay Semiconductors Single/Quad Channel, Half Pitch Mini-Flat Package ABSOLUTE MAXIMUM RATINGS PARAMETER (1) TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA tP 10 s Forward surge current IFSM 1.5 A Pdiss 100 mW Tj 125 C Collector emitter voltage VCEO 70 V Emitter collector voltage VECO 7 V mA Power dissipation Junction temperature OUTPUT Collector current tP/T = 0.5, tP 10 ms Collector peak current Power dissipation Junction temperature IC 50 ICM 100 mA Pdiss 150 mW Tj 125 C VISO 3750 VRMS COUPLER Related to standard climate 23/50 DIN 50014 AC isolation test voltage (RMS) Total power dissipation Ptot 250 mW Operating ambient temperature range Tamb - 40 to + 100 C Storage temperature range Tstg - 40 to + 100 C Soldering temperature (2) Tsld 260 C Notes (1) T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL IF = 50 mA VR = 0, f = 1 MHz MIN. TYP. MAX. VF 1.25 1.6 Cj 50 UNIT INPUT Forward voltage Junction capacitance V pF OUTPUT Collector emitter voltage IC = 100 A VCEO 70 V Emitter collector voltage IE = 100 A VECO 7 V VCE = 20 V, IF = 0, E = 0 ICEO 100 nA Collector emitter saturation voltage IF = 10 mA, IC = 1 mA VCEsat 0.3 V Cut-off frequency VCE = 5 V, IF = 10 mA, RL = 100 fc 100 kHz f = 1 MHz Ck 0.3 pF Collector dark current COUPLER Coupling capacitance Note Tamb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Document Number: 83510 Rev. 2.2, 10-Aug-09 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 901 TCMT1100 Series, TCMT4100 Series Vishay Semiconductors Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package CURRENT TRANSFER RATIO PARAMETER TEST CONDITION PART SYMBOL MIN. VCE = 5 V, IF = 5 mA TCMT1100 CTR 50 600 % TCMT1102 CTR 63 125 % TCMT1103 CTR 100 200 % TCMT1104 CTR 160 320 % TCMT1105 CTR 50 150 % TCMT1106 CTR 100 300 % TCMT1107 CTR 80 160 % TCMT1108 CTR 130 260 % TCMT1109 CTR 200 400 % TCMT4100 CTR 50 600 % TCMT4106 CTR 100 300 % VCE = 5 V, IF = 10 mA IC/IF VCE = 5 V, IF = 5 mA TYP. MAX. UNIT SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL Delay time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) td 3 s Rise time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) tr 3 s Fall time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) tf 4.7 s Storage time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) ts 0 s Turn-on time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) ton 6 s Turn-off time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) toff 5 s Turn-on time VS = 5 V, IF = 10 mA, RL = 1 k, (see figure 2) ton 9 s Turn-off time VS = 5 V, IF = 10 mA, RL = 1 k, (see figure 2) toff 18 s IF TYP. MAX. UNIT +5V IF 0 I C = 2 mA; adjusted through input amplitude R G = 50 tp = 0.01 T t p = 50 s Channel I Channel II 50 MIN. Oscilloscope R L = 1 M C L = 20 pF IF IF = 10 mA 0 +5V IC R G = 50 tp = 0.01 T t p = 50 s Channel I 100 Channel II 50 1 k Oscilloscope R L 1 M C L 20 pF 95 10804 95 10843 Fig. 1 - Test Circuit, Non-Saturated Operation www.vishay.com 902 Fig. 2 - Test Circuit, Saturated Operation For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83510 Rev. 2.2, 10-Aug-09 TCMT1100 Series, TCMT4100 Series Optocoupler, Phototransistor Output, Vishay Semiconductors Single/Quad Channel, Half Pitch Mini-Flat Package IF 0 tp IC t 100 % 90 % 10 % 0 tr td tp td tr t on (= td + tr) Pulse duration Delay time Rise time Turn-on time t tf t off ts t on ts tf t off (= ts + tf) Storage time Fall time Turn-off time 96 11698 Fig. 3 - Switching Times SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification SYMBOL MIN. CTI 175 IEC 68 part 1 TYP. MAX. UNIT 40/110/21 Comparative tracking index 399 VIOTM 6000 V VIORM 707 V PSO 265 mW ISI 130 mA TSI 150 Creepage distance 5 Clearance distance Insulation thickness, reinforced rated per IEC60950 2.10.5.1 C mm 5 mm 0.4 mm Note As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS 300 1000 Coupled device 250 IF - Forward Current (mA) Ptot - Total Power Dissipation (mW) Tamb = 25 C, unless otherwise specified 200 Phototransistor 150 IR-diode 100 50 0 10 1 0.1 0 96 11700 100 40 80 120 Tamb - Ambient Temperature (C) Fig. 4 - Total Power Dissipation vs. Ambient Temperature Document Number: 83510 Rev. 2.2, 10-Aug-09 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 96 11862 VF - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 903 TCMT1100 Series, TCMT4100 Series Vishay Semiconductors Optocoupler, Phototransistor Output, 2.0 100 VCE = 5 V IF = 5 mA 1.5 1.0 0.5 0 - 25 25 50 IF = 50 mA 5 mA 2 mA 1 1 mA 0.1 1 100 10 VCE - Collector Emitter Voltage (V) 95 10985 Fig. 9 - Collector Current vs. Collector Emitter Voltage 1.0 10 000 VCE = 20 V IF = 0 VCEsat - Collector Emitter Saturation Voltage (V) 1000 20 % used 100 10 0.8 CTR = 50 % used 0.6 0.4 0.2 10 % used 0 1 0 25 50 75 VCE = 5 V 10 1 0.1 95 11027 1 10 100 IF - Forward Current (mA) Fig. 8 - Collector Current vs. Forward Current www.vishay.com 904 Fig. 10 - Collector Emitter Saturation Voltage vs. Collector Current CTR - Current Transfer Ratio (%) 100 100 10 IC - Collector Current (mA) 95 11028 Fig. 7 - Collector Dark Current vs. Ambient Temperature 0.01 0.1 1 100 Tamb - Ambient Temperature (C) 95 11026 IC - Collector Current (mA) 10 mA 10 75 Fig. 6 - Relative Current Transfer Ratio vs. Ambient Temperature ICEO - Collector Dark Current, with Open Base (nA) 20 mA 0.1 0 Tamb - Ambient Temperature (C) 95 11025 IC - Collector Current (mA) CTRrel - Relative Current Transfer Ratio Single/Quad Channel, Half Pitch Mini-Flat Package 1000 VCE = 5 V 100 10 1 0.1 95 11029 1 10 100 IF - Forward Current (mA) Fig. 11 - Current Transfer Ratio vs. Forward Current For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83510 Rev. 2.2, 10-Aug-09 TCMT1100 Series, TCMT4100 Series 50 ton/toff- Turn-on /Turn-off Time (s) ton/toff - Turn-on/Turn-off Time (s) Optocoupler, Phototransistor Output, Vishay Semiconductors Single/Quad Channel, Half Pitch Mini-Flat Package Saturated operation VS = 5 V RL = 1 k 40 30 toff 20 10 ton 0 5 0 95 11031 10 15 20 10 8 ton 6 toff 4 2 0 0 IF - Forward Current (mA) 95 11030 Fig. 12 - Turm-on/off Time vs. Forward Current Non-saturated operation VS = 5 V RL = 100 2 4 6 8 IC - Collector Current (mA) Fig. 13 - Turn-on/off Time vs. Collector Current PACKAGE DIMENSIONS in millimeters (inches) + 0.3 7 - 0.4 4.4 0.2 + 0.3 0.7 - 0.4 0.45 0.1 1.27 nom. 4 0.05 1.9 0.1 0.1 2.5 0.15 +- 0.10 2.1 max. 2.8 max. 3 1.27 (0.05) 0.9 (0.035) Possible footprint 5 (0.2) 1 2 7.6 (0.3) Pin no. 1 identification 16283 Document Number: 83510 Rev. 2.2, 10-Aug-09 technical drawings according to DIN specifications For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 905 TCMT1100 Series, TCMT4100 Series Vishay Semiconductors Optocoupler, Phototransistor Output, 7 10.12 4.4 + 0.3 - 0.4 0.2 0.45 0.1 + 0.3 - 0.4 0.15 0.7 + 0.10 - 0.05 0.1 0.1 10.4 max. 1.9 2.1 max. Single/Quad Channel, Half Pitch Mini-Flat Package 1.27 nom. Possible footprint 7 x 1.27 = 8.89 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1.27 (0.05") 0.9 (0.035") 8.89 (0.35") 16 5 (0.2") Pin no. 1 identification 7.6 (0.3") Drawing-No.: 6.544-5330.03-4 technical drawings according to DIN specifications Issue: 1; 04.04.00 15226 PACKAGE MARKING MT1100 TCMT4100 V YWW M 68 V YWW M 68 21764-10 21764-11 Note This is an example of the marking of the TCMT1100 www.vishay.com 906 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83510 Rev. 2.2, 10-Aug-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1