Document Number: 83510 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com
Rev. 2.2, 10-Aug-09 900
Optocoupler, Phototransistor Output, Single/Quad Channel,
Half Pitch Mini-Flat Package
TCMT1100 Series, TCMT4100 Series
Vishay Semiconductors
DESCRIPTION
The TCMT1100 series consist of a phototransistor optically
coupled to a gallium arsenide infrared-emitting diode in a
4 pin (single channel) up to 16 pin (quad channel) package.
The elements are mounted on one leadframe providing a
fixed distance between input and output for highest safety
requirements.
FEATURES
• Low profile package (half pitch)
• AC isolation test voltage 3750 VRMS
• Low coupling capacitance of typical 0.3 pF
• Current transfer ratio (CTR) selected into groups
• Low temperature coefficient of CTR
• Wide ambient temperature range
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96EC
APPLICATIONS
• Programmable logic controllers
• Modems
• Answering machines
• General applications
AGENCY APPROVALS
• UL1577, file no. E76222 system code M, double protection
• C-UL CSA 22.2 bulletin 5A, double protection
• DIN EN 60747-5-5 (VDE 0884)
CE
AC
4P IN
16 PI N
12 8
9
16467-1 C
ORDER INFORMATION
PART REMARKS
TCMT1100 CTR 50 % to 600 %, SOP-4
TCMT1102 CTR 63 % to 125 %, SOP-4
TCMT1103 CTR 100 % to 200 %, SOP-4
TCMT1104 CTR 160 % to 320 %, SOP-4
TCMT1105 CTR 50 % to 150 %, SOP-4
TCMT1106 CTR 100 % to 300 %, SOP-4
TCMT1107 CTR 80 % to 160 %, SOP-4
TCMT1108 CTR 130 % to 260 %, SOP-4
TCMT1109 CTR 200 % to 400 %, SOP-4
TCMT4100 CTR 50 % to 600 %, quad channel, SOP-16
TCMT4106 CTR 100 % to 300 %, quad channel, SOP-16
Document Number: 83510 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com
Rev. 2.2, 10-Aug-09 901
TCMT1100 Series, TCMT4100 Series
Optocoupler, Phototransistor Output,
Single/Quad Channel,
Half Pitch Mini-Flat Package
Vishay Semiconductors
Notes
(1) Tamb = 25 °C, unless otherwise specified.
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum
ratings for extended periods of the time can adversely affect reliability.
(2) Refer to reflow profile soldering conditions for surface mounted devices.
Note
Tamb = 25 °C, unless otherwise specified.
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
ABSOLUTE MAXIMUM RATINGS (1)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage VR6V
Forward current IF60 mA
Forward surge current tP ≤ 10 µs IFSM 1.5 A
Power dissipation Pdiss 100 mW
Junction temperature Tj125 °C
OUTPUT
Collector emitter voltage VCEO 70 V
Emitter collector voltage VECO 7V
Collector current IC50 mA
Collector peak current tP/T = 0.5, tP ≤ 10 ms ICM 100 mA
Power dissipation Pdiss 150 mW
Junction temperature Tj125 °C
COUPLER
AC isolation test voltage (RMS) Related to standard climate 23/50
DIN 50014 VISO 3750 VRMS
Total power dissipation Ptot 250 mW
Operating ambient temperature range Tamb - 40 to + 100 °C
Storage temperature range Tstg - 40 to + 100 °C
Soldering temperature (2) Tsld 260 °C
ELECTRICAL CHARACTERISTICS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 50 mA VF1.25 1.6 V
Junction capacitance VR = 0, f = 1 MHz Cj50 pF
OUTPUT
Collector emitter voltage IC = 100 µA VCEO 70 V
Emitter collector voltage IE = 100 µA VECO 7V
Collector dark current VCE = 20 V, IF = 0, E = 0 ICEO 100 nA
COUPLER
Collector emitter saturation voltage IF = 10 mA, IC = 1 mA VCEsat 0.3 V
Cut-off frequency VCE = 5 V, IF = 10 mA,
RL = 100 Ωfc100 kHz
Coupling capacitance f = 1 MHz Ck0.3 pF
www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83510
902 Rev. 2.2, 10-Aug-09
TCMT1100 Series, TCMT4100 Series
Vishay Semiconductors Optocoupler, Phototransistor Output,
Single/Quad Channel,
Half Pitch Mini-Flat Package
Fig. 1 - Test Circuit, Non-Saturated Operation Fig. 2 - Test Circuit, Saturated Operation
CURRENT TRANSFER RATIO
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IC/IF
VCE = 5 V, IF = 5 mA TCMT1100 CTR 50 600 %
VCE = 5 V, IF = 10 mA
TCMT1102 CTR 63 125 %
TCMT1103 CTR 100 200 %
TCMT1104 CTR 160 320 %
VCE = 5 V, IF = 5 mA
TCMT1105 CTR 50 150 %
TCMT1106 CTR 100 300 %
TCMT1107 CTR 80 160 %
TCMT1108 CTR 130 260 %
TCMT1109 CTR 200 400 %
TCMT4100 CTR 50 600 %
TCMT4106 CTR 100 300 %
SWITCHING CHARACTERISTICS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Delay time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) td3µs
Rise time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) tr3µs
Fall time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) tf4.7 µs
Storage time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) ts0µs
Turn-on time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) ton 6µs
Turn-off time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) toff 5µs
Turn-on time VS = 5 V, IF = 10 mA, RL = 1 kΩ,
(see figure 2) ton 9µs
Turn-off time VS = 5 V, IF = 10 mA, RL = 1 kΩ,
(see figure 2) toff 18 µs
Channel I
Channel II
95 10804
R
G
= 50 Ω
t
p
t
p
= 50 µs
T= 0.01
+ 5 V
I
F
0
50 Ω100 Ω
I
F
I
C
= 2 mA; adjusted through
input amplitude
Oscilloscope
R
L
= 1 MΩ
C
L
= 20 pF
Channel I
Channel II
95 10843
R
G
= 50 Ω
t
p
t
p
= 50 µs
T= 0.01
+ 5 V
I
C
I
F
0
50 Ω1 kΩ
I
F
= 10 mA
Oscilloscope
R
L
≥
C
L
20 pF
1 MΩ
≤
Document Number: 83510 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com
Rev. 2.2, 10-Aug-09 903
TCMT1100 Series, TCMT4100 Series
Optocoupler, Phototransistor Output,
Single/Quad Channel,
Half Pitch Mini-Flat Package
Vishay Semiconductors
Fig. 3 - Switching Times
Note
As per IEC 60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the
safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS
Tamb = 25 °C, unless otherwise specified
Fig. 4 - Total Power Dissipation vs. Ambient Temperature Fig. 5 - Forward Current vs. Forward Voltage
tpt
t
0
0
10 %
90 %
100 %
tr
td
ton
tstf
toff
IF
IC
tpPulse duration
tdDelay time
trRise time
ton (= td + tr) Turn-on time
tsStorage time
tfFall time
toff (= ts + tf)Turn-off time
96 11698
SAFETY AND INSULATION RATINGS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Climatic classification IEC 68 part 1 40/110/21
Comparative tracking index CTI 175 399
VIOTM 6000 V
VIORM 707 V
PSO 265 mW
ISI 130 mA
TSI 150 °C
Creepage distance 5mm
Clearance distance 5mm
Insulation thickness, reinforced rated per IEC60950 2.10.5.1 0.4 mm
0
50
100
150
200
250
300
04080 120
P
tot
- Total Power Dissipation (mW)
T
amb
- Ambient Temperature (°C)
96 11700
Coupled device
Phototransistor
IR-diode
0.1
1
10
100
1000
0
VF - Forward Voltage (V)
96 11862
IF - Forward Current (mA)
1.6
0.2 1.4
1.2
1.0
0.80.6
0.4 2.0
1.8
www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83510
904 Rev. 2.2, 10-Aug-09
TCMT1100 Series, TCMT4100 Series
Vishay Semiconductors Optocoupler, Phototransistor Output,
Single/Quad Channel,
Half Pitch Mini-Flat Package
Fig. 6 - Relative Current Transfer Ratio vs.
Ambient Temperature
Fig. 7 - Collector Dark Current vs. Ambient Temperature
Fig. 8 - Collector Current vs. Forward Current
Fig. 9 - Collector Current vs. Collector Emitter Voltage
Fig. 10 - Collector Emitter Saturation Voltage vs.
Collector Current
Fig. 11 - Current Transfer Ratio vs. Forward Current
- 25 0 25 50
0
0.5
1.0
1.5
2.0
CTRrel - Relative Current Transfer Ratio
95 11025
75
Tamb - Ambient Temperature (°C)
VCE = 5 V
IF = 5 mA
0255075
1
10
100
1000
10 000
ICEO - Collector Dark Current,
100
95 11026
with Open Base (nA)
VCE = 20 V
IF = 0
Tamb - Ambient Temperature (°C)
0.1 1 10
0.01
0.1
1
100
IC - Collector Current (mA)
IF - Forward Current (mA)
100
95 11027
10
VCE = 5 V
0.1 1 10
0.1
1
10
100
VCE - Collector Emitter Voltage (V)
100
95 10985
IC - Collector Current (mA)
I
F
= 50 mA
5 mA
2 mA
1 mA
20 mA
10 mA
110
0
0.2
0.4
0.6
0.8
1.0
VCEsat - Collector Emitter
Saturation Voltage (V)
IC - Collector Current (mA)
100
CTR = 50 %
used
20 % used
95 11028
10 % used
0.1 1 10
1
10
100
1000
CTR - Current Transfer Ratio (%)
IF - Forward Current (mA)
100
95 11029
VCE = 5 V
Document Number: 83510 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com
Rev. 2.2, 10-Aug-09 905
TCMT1100 Series, TCMT4100 Series
Optocoupler, Phototransistor Output,
Single/Quad Channel,
Half Pitch Mini-Flat Package
Vishay Semiconductors
Fig. 12 - Turm-on/off Time vs. Forward Current Fig. 13 - Turn-on/off Time vs. Collector Current
PACKAGE DIMENSIONS in millimeters (inches)
01015
0
10
20
30
40
50
I
F
- Forward Current (mA)
20
95 11031
t
on
/t
off
- Turn-on/Turn-off Time (µs)
Saturated operation
VS = 5 V
RL = 1 kΩ
toff
ton
504
0
2
4
6
8
10
IC - Collector Current (mA)
8
95 11030
ton/toff- Turn-on /Turn-off Time (µs)
Non-saturated
operation
VS = 5 V
RL = 100 Ω
toff
ton
6
2
16283
Possible footprint
technical drawings
according to DIN
specifications
0.15 + 0.10
- 0.05
0.7 + 0.3
- 0.4
7 + 0.3
- 0.4
0.1 ± 0.1
12
43
Pin no. 1 identification
2.1 max.
1.9
2.8 max.
1.27 nom.
0.45 ± 0.1
0.9 (0.035)
1.27 (0.05)
4.4 ± 0.2
2.5
5 (0.2)
7.6 (0.3)
www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83510
906 Rev. 2.2, 10-Aug-09
TCMT1100 Series, TCMT4100 Series
Vishay Semiconductors Optocoupler, Phototransistor Output,
Single/Quad Channel,
Half Pitch Mini-Flat Package
PACKAGE MARKING
Note
This is an example of the marking of the TCMT1100
7.6 (0.3")
5 (0.2")
4.4 ± 0.2
1.9
1.27 nom.
0.45 ± 0.1
7+ 0.3
- 0.4
0.7 + 0.3
- 0.4
0.1 ± 0.1
0.15
+ 0.10
- 0.05
1.27 (0.05")
0.9 (0.035")
specifications
according to DIN
technical drawings
10.12
10.4 max.
7 x 1.27 = 8.89
8.89 (0.35")
2.1 max.
Pin no. 1 identification
Issue: 1; 04.04.00
Drawing-No.: 6.544-5330.03-4
Possible footprint
16 15 14 13 12 11 10 9
12345678
15226
21764-10
MT1100
V YWW M 68
21764-11
TCMT4100
V YWW M 68
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
