14 Pin DIP Tapped Passive Delay Line The 14 Pin DIP Tapped Passive Delay Lines manufactured by Engineered Components Company are designed to provide precise and stable delays for analog delay line applications. These tapped delay lines are provided in a low-profile 14-pin DIP package, available in impedances of 50, 100, and 200 ohms, with 10 equally spaced taps. These delay lines are designed and tested in accordance with MIL-D-23859 and they are capable of meeting the environmental requirements of MIL-STD-202 for moisture resistance, vibration, temperature cycling, humidity, and life. The MTBF on these delay lines, when calculated per MIL-HDBK-217, for a 50 deg.C ground fixed environment and with 50VDC applied, is in excess of 12 million hours. The temperature coefficient of delay is less than 75 ppm/deg.C over the operating temperature range of -55 to +125 deg. C. The delay line is fully encapsulated in epoxy resin and is housed in a Diallyl Phthalate case, green in color. The case marking is applied by silkscreen using white epoxy paint. The 13 beryllium copper leads are tin plated and meet the solderability requirements of MIL-STD-202, Method 208. * Tap Delay(nS) 0.5+/-0.2 1.0+/-0.5 1.5+/-0.5 2.0+/-0.5 2.5+/-0.6 3.0+/-0.6 3.5+/-0.8 4.0+/-0.8 4.5+/-1.0 5.0+/-1.0 10.0+/-1.2 15.0+/-1.4 10.0+/-1.6 15.0+/-1.8 20.0+/-2.0 30.0+/-2.5 40.0+/-3.0 0.5+/-0.2 1.0+/-0.5 1.5+/-0.5 2.0+/-0.5 2.5+/-0.6 3.0+/-0.6 4.0+/-0.8 5.0+/-1.0 6.0+/-1.2 7.0+/-1.4 8.0+/-1.6 9.0+/-1.8 10.0+/-2.0 15.0+/-2.5 1.0+/-0.5 2.0+/-0.6 2.5+/-0.6 3.0+/-0.6 4.0+/-0.8 5.0+/-1.0 6.0+/-1.2 8.0+/-1.6 10.0+/-2.0 Impedance (Ohms) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 DCR (Ohms) 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0 1.0 1.0 1.0 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.5 3.0 3.0 MECHANICAL DIAGRAM .150 TYP. .012 TYP. .300 .018 .100 TYP. .060 TYP. +/-.020 .155 .180 YYWW Rise Time(nS) 2.0 3.5 4.5 5.5 6.5 8.0 9.0 11.0 12.0 13.0 15.0 18.5 21.0 22.0 22.0 32.0 40.0 2.0 3.5 5.0 5.0 7.0 8.0 11.0 12.5 12.5 18.5 20.0 22.0 24.0 32.0 3.5 6.0 7.0 8.0 10.0 12.0 14.0 19.0 24.0 MADE IN USA Product Selection Table Part Delay Number Time(nS) 14DIP-505T 5.0+/-0.5 14DIP-510T 10.0+/-0.7 14DIP-515T 15.0+/-1.0 14DIP-520T 20.0+/-1.2 14DIP-525T 25.0+/-1.5 14DIP-530T 30.0+/-1.5 14DIP-535T 35.0+/-2.0 14DIP-540T 40.0+/-2.0 14DIP-545T 45.0+/-2.5 14DIP-550T 50.0+/-2.5 14DIP-560T 60.0+/-3.0 14DIP-570T 70.0+/-3.5 14DIP-580T 60.0+/-4.0 14DIP-590T 70.0+/-4.5 14DIP-5100T 100.0+/-5.0 14DIP-5150T 150.5+/-6.5 14DIP-5200T 200.0+/-10.0 14DIP-1005T 5.0+/-0.5 14DIP-1010T 10.0+/-0.7 14DIP-1015T 15.0+/-1.0 14DIP-1020T 20.0+/-1.2 14DIP-1025T 25.0+/-1.5 14DIP-1030T 30.0+/-1.5 14DIP-1040T 40.0+/-2.0 14DIP-1050T 50.0+/-2.5 14DIP-1060T 60.0+/-3.0 14DIP-1070T 70.0+/-3.5 14DIP-1080T 80.0+/-4.0 14DIP-1090T 90.0+/-4.5 14DIP-10100T 100.0+/-5.0 14DIP-10150T 150.0+/-6.5 14DIP-2010T 10.0+/-0.7 14DIP-2020T 20.0+/-1.2 14DIP-2025T 25.0+/-1.5 14DIP-2030T 30.0+/-1.5 14DIP-2040T 40.0+/-2.0 14DIP-2050T 50.0+/-2.5 14DIP-2060T 60.0+/-3.0 14DIP-2080T 80.0+/-4.0 14DIP-20100T 100.0+/-5.0 .020 DATE CODE C 1 3 5 7 9 C 14DIP-1050T .400 IN 2 6 4 Top view 8 10 .800 BLOCK DIAGRAM 1 IN 1 C 14 13 2 3 3 12 4 4 5 11 6 5 7 10 8 9 6 9 7 OUT 8 C Operating Specifications: All measurements made at 25 deg. C Delays measured at 50% level on the leading edge Impedance tolerance is +/-10% Maximum attenuation is .5db Maximum distortion is +/-5% Maximum overshoot is 10% Maximum working voltage is 25VDC Dielectric strength is 100VDC @ 50uA Minimum insulation resistance is10,000 megohms @ 100VDC *Referenced from the input of the delay line. Special modules can often be manufactured to provide for customer specific applications. engineered components company A Division of Cornucopia Tool & Plastics, Inc. PO Box 1915, 448 Sherwood Rd., Paso Robles CA 93447 Phone: 805-369-0034 Fax: 805-369-0033 Web: www.ec2.com