ITW Chemtronics TDS # SQR Technical Data Sheet SqRTM Compact End Face Cleaning Tool PRODUCT DESCRIPTION SqRTM is the precision wipe system employing a patented process for cleaning fiber optic end-faces. It is a self-contained cleaning tool that can be used in the wetto-dry combination cleaning process CCpTM. The SqRTM is portable, convenient and economical for use in field or in tools kits. The folds and packaging material of the SqRTM provides surface for cleaning and complete instructions and guides. Effective wet-to-dry cleaning Provides an ideal Cleaning System for field or OEM applications Convenient Size - Portable system easily fits in tool cases and is handy to use on work benches. Easily slides into a pocket too. Heavy duty lint-Free wiping material tough-enough to remove buffer-gel; soft enough for all end face cleaning Wipe material won't shred or tear TYPICAL APPLICATIONS SqRTM wipes are used in Fiber Optic and Telecommunications applications for: * End-Face Connector Cleaning * Splice Preparation * Buffer Gel Removal TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES SqRTM wipes are 100% noncontaminating material. These wipes have high absorbency and contamination entrapment capacity, as well as high wet strength. Excellent solvent resistance Excellent particle entrapment High absorbency capacity and rate Very low solvent extractables High wet strength COMPATIBILITY SqRTM wipes are compatible with most common solvents such as alcohols, hydrocarbons and chlorinated solvents. The wipes are also generally compatible with dilute or weak acids. TECHNICAL AND APPLICATION ASSISTANCE ITW Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. AVAILABILITY SqRTM Wipes 4" x 4" 10 wipes/unit USAGE INSTRUCTIONS Wet-to-dry Cleaning with the SqRTM ith the QbE 1. Place the barrier with the guiding arrows between the top and second wipe. 2.Lightly spot the SqRTM wipe on with Electro-Wash(R) PX, Electro-Wash(R)MX pen or Fiber-WashTM 3. Draw the end-face from the solvent wetted area to the dry area; following the arrows visible through the wipe 4. Repeat two more times. Buffer Gel Removal Buffer Gel Removal 1.Pull three single SqRTM wipes from the SqRTM pad of wipes 2.Lightly moisten the SqRTM wipe with Electro-Wash(R)PX, Electro-Wash(R)MX pen or Fiber-WashTM 3.Pull the cable through the first wiper and discard. 4.Repeat with the other two wipes until the cable `squeaks' clean. For Splice Preparation MANUFACTURED BY: ITW CHEMTRONICS(R) 8125 Cobb Center Drive Kennesaw, GA 30152 1-770-424-4888 REV. A (04/10) www.chemtronics.com 1. Remove the top wipe from the SqRTM pad of wipes 2. Lightly moisten the SqRTM wipe with Electro-Wash(R) PX, Electro-Wash(R) MX pen or Fiber-WashTM 3. Gently wipe away fiber contaminants. 4. Lightly dampen a 38540ESD swab, remove soil from V-grooves on fusion splicer. NOTE: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. ITW Chemtronics(R) does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. Chemtronics Electro-Wash is a registered trademarks of ITW Chemtronics. All rights reserved. SqR, CCp, and FiberWashTM are trademarks of ITW Chemtronics. All rights reserved. DISTRIBUTED BY: